SPECIAL REPAIR OF BLDG NO. T-06 NFS NODE AND RENOVATION OF EXISTING TYPE A ACCN AND CONVERSION INTO TRANSIT FACILITY AT VARANASI CANTT UNDER GE (EAST) PRAYAGRAJ.

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) in plinth protection,, finished even and fair, complete all as specified and directed.

M&L for 25mm thick Cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate in levelling course, benching etc, finished even & rough to receive cement mortar screed bed, complete all as specified and directed.

M&L for mirror polishing on marble/ kota stone/ granite / stone work, wherever required to give high gloss finish complete all specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for non-skid Coloured Ceramic tiles 7 to 8 mm thick (square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match shade of tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4), complete all as specified and directed.

M&L for Coloured non-skid Ceramic tiles 7 to 8 mm thick (square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in vertical surface, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles with including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M&L for non-skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4), complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 450 X 300 X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in coloured cement to match the shade of tiles laid over and including 10 mm thick rendering layer in CM (1:4), complete all as specified and directed.

Demolition of Stone sett paving of any description or thickness, complete all as specified and directed.

M&L for 75 mm thick cement concrete type-C-2, 1:3:6 (using 40mm graded crushed stone aggregate) for sub base finished cement concrete surface even and rough, complete all as specified and directed.

M&L for machine pressed precast concrete glossy coloured interlocking paver block any with grey cement and pigment shape and size conferming to IS- 15658- 2006 of 60mm thickness, M- 35 Grade with & including 50mm thick sand filling under floors for paver block and filling the joints for packing, complete all as specified and directed.

Demolition of brick work or stone /boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in built in CM 1:4, complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces with mixing of liquid WPC finished even and smooth, complete all as specified and directed. Note: WPC measured and paid separetely.

M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and fair complete all as specfied and directed.

S&F GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste, complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of Oil bound distemper smooth wall finish in approved colour/shade over a coat of primer over & including wall care putty after preparation of surfaces, complete all as specified and directed .

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of exterior emulsion paint smooth wall finish in approved colour/shade over a coat of primer over & including wall care putty after preparation of surfaces, complete all as specified and directed.

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and prepairing old decorated plastered surfaces of wall including cornices,pilastered etc. and applying two coats of Oil bond distemper over one coat of primer over & including wall care putty on wall surface complete all as specified and directed.

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and prepaing old decorated plastered surfaces of wall including cornices, pilastered etc. and applying two coats of exterior emulsion paint over & including wall care putty on wall surface, complete all as specified and directed. Note- The time difference between one coat and two coat will be decided by Engineering-in-Charge.

Dismantaling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 15-20mm thick Green Marble work (table rubbed and polished) for wall lining (veneering to wall) in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of marble with and including 15mm thick screed bed in CM 1:4, complete all as specified and directed .

Taking down chowkhat with shutters (without taking off shutters from the frame) exc. 1.50 Sqm but n exc. 4 Sqm complete and all as specified and directed

Taking down chowkhat with shutters (without taking off shutters from the frame) n exc. 1.50 Sqm complete and all as specified and directed

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified and directed.

S&F butt hinges, medium weight, cold rolled mild steel, 125 mm size including fixed to frame, complete all as specified and directed.

S&F factory made 35 mm thick 2 nd class HW of plain framed panelled shutter ( two panels) with lock rail panels of timber flat on both sides feather edged), or of veneered particle board medium density or particle board with commercial face complete all as specified and directed. (Shutter will be two leaf)

S&F for 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats. (Shutter will be two leaf)

M&L for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paints over and incl a coat of pink primer, complete all as specified and directed.

M&L for preparing new steel & iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F 200 mm long aluminium barrel tower bolt of extruded section, complete and all as specified and directed

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

S&F Aluminium handles, cast type anodised150mm size, complete all as specified and directed.

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate and fixing to frame, complete all as specified and directed.

S&F for floor door stopper of overall length of cover plate in 140mm aluminium alloy body and tonuge with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge.

S&F Hasp and staple 150 mm size, safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate, fixed with screws in repair complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

Dismantling boarding, any description, fixed in any position with screws, complete all as specified and directed.

M&L for 5mm thick plain colour printed PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site, complete all as specified and directed.

S&F 18/19mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed .

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps 30mm (when open) complete all as specified and directed.

M&L for preparing old painted steel & iron surfaces of any description over 10 cm in width or girth and applying one coats of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified.

S&F rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed.

S&F rolled mild steel compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc, complete all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section, in any position, complete all as specified and directed.

M&L for Second class hard-wood in scantlings as in timber framed and fixed all as specified and directed.

Dismantling asbestos Cement (corrugated or semi corrugated etc) sheet roof covering, complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with welf tapping screws, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F suspended false ceiling using 6 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm and size of grid 605mm x 605mm x 4mm thick white pre-laminated self embosed, texture Insulation and accoustic purpose to be placed on at any height on hot dipped galvanised iron imposed grid with 24mm wide T section powder coated, the frame work shall comprises of main runner made with 0.35mm thick GS sheet and of size 24x32x3000mm spaced at 1200mm maximum centre to centre with hangers of 4mm dia GI wire to be fixed with rawl plugs, adjusted with screws (last hanger at the end if each main runner shall not be greater than 450mm from adjacent wall , flush fittings of 1200 mm long cross tee with double stiching to be interlocked between main runners at 600mm c/c from cross tee more than 600mm to be suported independently and double to be formed by fittings 600mm long cross tee centrally between the 1200mm cross tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19 mm and 3000mm long of white colour including making hole in board for provison of light fittings complete all as specified and directed.

M&L for providing cement concrete type B0 1:2:4 (using 12.5mm graded crushed stone aggregate) in roof kerbs or mud stops, roof padding, rounded or chamgered on edges and misc surfaces using water proofing compound, complete all as specified and directed. Note: Water proofing compound shall be paid measured & separately.

Supply & Fixing powder coated aluminium openable door single leaf with powder coated aluminium frame of section 62.5 x 37 x 1.2 mm thick, shutter with bottom & middle rail of section 112.50 x 37 x 1.2mm thick and styles & top rail of section 83 x 37 x 1.2mm thick with centrally locking arrangement with lock make of 'GODREJ' or 'LINK' seven lever and self closing device with rebate including jointing cleats, fixing of builders hardware fittings, necessary numbers of sliding roller and glazing with 5.0mm thick ordinary plain glass including necessary fittings, fixtures & aluminium snap beads complete all as specified & directed.

Supply & Fixing powder coated aluminium openable window / CSW / Ventilator with powder coated aluminium anodized top, bottom and side of aluminium section 93 x 31.75 x 1.2 mm thick with shutters having styles & rails of powder coated aluminium section 44.45 x 44.45 x 1.2mm thick including lock, jointing cleats, glazing clips, rubber packing, aluminium snap beading, screws anodized aluminium fittings such as hinges, tower bolts, handles etc including 5.0mm thick ordinary plain glass complete including providing and fixing powder coated aluminium chequered grill of anodized section of mesh 50 x 50mm of 08 mm dia of aluminium bar fixed to frame with 20 x 2mm aluminium flat with screw and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified & directed.

Supply & Fixing powder coated aluminium fixed type window / CSW / Ventilator with powder coated aluminium anodized top, bottom and side of aluminium section 61.85 x 31.75 x 1.2 mm thick with shutters having styles & rails of powder coated aluminium section 44.45 x 44.45 x 1.2mm thick including jointing cleats, glazing clips, rubber packing, aluminium snap beading, screws anodized aluminium fittings such as hinges, handles etc including providing and fixing powder coated aluminium chequered grill of anodized section of mesh 50 x 50mm of 08 mm dia of aluminium bar fixed to frame with 20 x 2mm aluminium flat with screw and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm, complete all as specified & directed.

S&F in repair 3 mm thick figured glass, pin head type and glazing with wooden beading fixed or oil putty in squares not exceeding 0.50 Sqm in each pane, including hacking out old glass complete all as specified and directed .

Supply & Fixing aluminium extruded section body door closer hydraulically regulated designation No. 3 universal type suitable for aluminium door shutters weight of shutter between 61 to 80 Kg complete all as specified & as directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

S&F solar/sun control film having 25 micron reflective type sticked to glass panes of aluminium doors or windows as required as per instruction of manufacturer complete all as specified and as directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed

S&F factory made solid panel PVC moulded Door Shutters 28 to 30 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 2mm thick consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC Sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets foor top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet bedding, and joined together with solvent cement, supplying & fixing in the frame including 3 Nos 100 mm long stainless hinges fixed to frame at site, complete all as specified and directed.

Supply and fix 1000 litres capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of old tank complete all as specified and directed..

Taking up or down steel tubing 15 mm and connections and supply and fixing 20 mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

Taking up or down steel tubing 20 mm and connections and supply and fixing 25 mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.all as specified and as directed.

S&F PP-R Gate valves 25 mm dia(brass insert) as per requirement of the site, complete all as specified and directed.

S&F in repair 20mm PVC nipple suitable for HDPE water tank. (Minimum weight 45gms) complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete all as specified and directed.

S&F in repairs Vitreous china squatting pan ‘Orissa’ pattern, size 580mm x 440 mm, white coloured, with integral foot rests, including provision of lime concrete bedding, complete all as specified and directed.

S&F Vitreous china coloured wash down water closet pan (Padestal Pattern), (fixed in repair), including connection to flush pipe, 'P' or 'S' trap, with fixing bolts including PVC seat cover with chromium plated mild steel hinges device (excluding flushing cistern and flush pipe), complete all as specified and directed .

S&F health faucet (ABS Body) mild steel chromium plated in repair suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs Vitreous china wash basin, white, flat back, size 550mmx400mm including pedestal and brackets and cutting for and pinning in ends of brackets, complete all as specified and directed.

S&F in reapir brass chromium plated soap dish complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125 mm size with swivel joints, complete all as specified and directed.

S&F in repair Tubular towel rail of brass chromium plated, 20 mm dia, 'D' type, 60 cm long between flanges including brackets, complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed.

S&F in repair fancy type bib taps cast copper alloy chromium plated with crutch or butter fly handle screwed down screwed for iron pipe 15mm bore complete all as specified and directed.

S&F in repair 15 mm dia fancy type chromium plated with long shank and cup angle valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union, complete and all as specified and directed

S&F in repair 15 mm dia stop valves cast copper alloy chromium plated long shank(concealed type), screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union, complete all as specified and directed.

S&F in repair grating doom 125 mm dia with waste hole of PTMT (min weight 40 gms) complete all as specified and directed.

S&F stainless steel tubing of 25 mm dia for curtain rod fancy type and CP brabs brackets, socket and knobs (wall to wall or flush to wall) for securing to curtain rod, fixed in repair complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring, joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed , in any length with rubber ring, joints,fixed to walls complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed , in any length with rubber ring, joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed , in any length with rubber ring, joints,fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm PVC (SWR) bends andy radius with access door, complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius with access door, complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single (SingleT)equal or unequal complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single (SingleT)equal or unequal, complete all as specified and directed.

S&F 110mm PVC (SWR) Vent cowl, complete all as specified and directed.

S&F 75mm PVC (SWR) Vent cowl, complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) suitable for 75mm bore pipe, complete all as specified and directed.

Demolition and breaking up drain pipes Internal dia of pipe in 150 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar ® complete all as specified and directed.

M&L for 150mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed as specified including Bends and taper bends, any radius complete all as specified and directed.

M&L for concrete bed to 150 mm bore drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in, PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste coupling including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste pipe complete all as specified and directed.

S&F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (minimum weight 300 gms) complete all as specified and directed.

S&F in reapair 15mm bore fancy type pillar tap cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered 'hot' or 'Cold' with long screwed shanks and fly nuts fixed to pipe complete all as specified and directed.

M&L for Plain cement concrete, 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels or drains, complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc, complete all as specified directed.

M&L for mild steel TMT bars 10 mm dia and over in reinforcement cut to length bent to shape required including cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia all as specified and as directed.

Supply only Liquid water proofing compound, complete all as specified and directed.

Demolation of reinforced cement concrete unreinforced in ground floor and paving not exceeding 15 cm thick (below or above G.L) and removing the debris out side the premises complete all as specified and directed by Engineer in Charge.

M&L for providing reinforcement cement concrete type B-1, (1:2:4), (using 20 mm graded crushed stone aggregate ) as in manhole cover slab set in cement mortar (1:6) including necessary form work as required complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over & including 15mm cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilaters and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rest free, straight, mitred and jointed mechanicall wherever required including cleat angel, Aluminium snap beading for glaxing/ paneling CP brass/ stainless steel screws, complete all as specified and directed by Engineer-in-Charge.

M&L for 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to aluminium frame work, complete all as specified and directed. by Engineer-in-Charge.

M&L for post construction anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L for post construction anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and directed.

M&L for virified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm, in floors and neccessary vertical surface as skriting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including 15mm thick screed bedding in cement mortar (1:4), complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on concrete surface in ceiling finished even & fair, complete all as specified and directed.

M&L for complete removal of existing treatment on wall surface washing, rubbing down and stopping of distempered and painted surfaces, complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling surface washing, rubbing down and stopping of distempered and painted surfaces, complete all as specified and directed.

M&L for exterior/interior grade 3mm thick wall care putty on new/old wall surface, complete all as specified and directed.

M&L for 3 mm thick wall care putty on new/old ceiling surface, complete all as specified and directed.

M&L for preparation of new / old wall/ceiling surfaces distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work, complete all as specified and directed.

M&L for finishing new or old walls surface with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.

S&F in repair Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100mm bore pipe, complete all as specified and directed.

All as per item No. 126 above but 75mm bore pipe.

Dimantling PVC water tanks exc 250 but n. exc 500 ltrs complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks white colour 500 ltrs (cylingdrical vertical with closed top) rotational threaded tank cover hoisted and fixed in position including all fittings such as connection piece, inlet, outlet over flow wash out pipe etc, complete all as specified and directed.

S&F in repair gun-metal stop cock 20 mm bore, including all fitting such as conncetion piece, inlet, outlet over & floor, washed pipe etc. globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F Ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe 20mm bore or brass ferrule and fixed in repairs, complete all as specified and directed.

Taking down 15mm GI tubing and connection etc complete all as specified and directed.

Taking down 20mm GI tubing and connection etc complete all as specified and directed.

S&F of CPVC pipes outer diameter 15/16 mm SDR 11 and plain CPVC SDR 11 fittings on walls and ceilings or laying in floors complete all as specified and directed.

S&F of CPVC pipes outer diameter 20mm SDR 11 and plain CPVC SDR 11 fittings on walls and ceilings or laying in floors, complete all as specified and directed.

S&F in repair 15mm size bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes, complete all as specified and directed. Make:- Jaquar/Cera or equivalent as specified in PS

S&F in repair 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete. Make :- Jaquar/Cera or equivalent cat part of make as specified in list of make.

S&F in repair Vitreous china wash down water closet pedestral pan one piece wall mounted EWCs with slim soft clse seat cover with S trap colour snow white of size 650 x350x765MM floor mounting recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, Make:- Cera Cat No S1013214 or equivalent cat part of make as specified in list of make. complete all as specified and as directed

S&F in repair brass chromium plated 2 way bib cock with wall flange 15 mm dia including fixing to pipe complete all as specified and directed. Make : Cera Cat No. F-2008161 or equivalent cat part of make as specified in list of make.

S&F in repair Health faucet brass body with 8 mm dia 1.00 m long flexible tube and wall hook including fixing complete all as specified and directed. Make:- Cera Cat No.- F-8030301or equivalent cat part of make as specified in list of make.

S&F in repair stainless steel toilet paper holder with flat recessed type complete all as specified and directed

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in repair Corner glass shelf with brass chromium plated bracket fixed to wall complete all as specified and directed. Make:- Cera Cat No. F5005101 or equivalent in make as specified in PS.

S&F in repair vitreous china wall hung wash hand basin with full pedestal incl pedestal white flat back size 515 x 430 x 110 mm excluding taps waste chain and plug but including bracket, waste coupling of 32 mm size, complete all as specified and directed Make:- Jaquar/ Cera Cat Part No. S2040170F or equivalent in make as specified in PS. .

S&F in repair 15 mm bore central hole basin mixer with 450mm braided connection pipe (without popup) complete all as specified and directed Make : Cera cat Part No. F2008461 or equivalent in make as specified in PS.

S&F in repair 15 mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed. Make:- Cera Cat Part No. F1005402 or equivalent in make as specified in PS.

S&F in repair 20 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed, complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in repair brass chromium plated Toilet paper holder compete all as specified as approved by Engineer-in-Charge. Make:- Jaquar cat part No AKP 35741P or equivalent in makes as specified in PS.

S&F in repair SS soap dish complete all as specified and directed Make:- Cera Cat Part No. F5007106 or equivalent in makes as specified in PS.

S&F Solid PVC Double door frame with wood grain of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.

S&F factory made wood grain printed solid PVC door shutters 28 to 30 mm thick (stiles) but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly Complete all as specified and directed.

S&F Factory Made wood grain Core Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face,With Particle Board supplying & fixing in frame at site as per specification & drawing, complete all as specifeid and directed

S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed

M&L for MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed

Providing and fixing factory made uPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm(+ - 0.2 mm). Window profile with hollow section with multi chamber.Frame (88 mm x 52 mm),sliding sash (42 mm x 67 mm ).Sliding mesh Sash (42 mm x 57 mm) Slide interlock (One vertical length in each shutters )(45.5 mmx 28 mm ),Glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all corners,including railing of holes for fixing hardware and drainage of water etc. making arrangement for fising of hardware.EPDM gasket 1.2 + - 0.2mm thick galvanized steel frame (30mmx18 mm) 2 No.s ,sliding sash(30 mm x 18 mm),sliding mesh sash (26 mmx 10 mm) profile to be inserted in required profile ,frame will be fixed to wall with 8 mmx100 mm long fasteners.HardwareTouch lock of zinc alloyed (white powder coated), steel roller system ,stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories, complete all as specified and directed. Note:- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)Area n exc 2.00 Sqm Each

M&L for 4.8 mm thick sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for 4.8 mm thick frosted sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.

Removing/ taking down of old water proofing treatment from roof/concrete surfaces removal to distance exc 250 mtr complete all as satisfied and directed.

M&L for providing water proofing treatment over cleaned roof surface with APP modified bitumenous membrane weight not less than 3 kg per sqm comprising of the following and testing of following :- [a] 10 mm thick rendering or screen bed or bedding layer in cement sand mortar 1:4 mixed with water proofing compound @ 3 % by weight of cement and surface finished even & fair. [b] applying one coat of bitumen primer @ 0.3 litre per sqm on plastered surface. [c] Applying one coat of hot blown bitumen 85/25 grade 1.2 kg per sqm . [d] Provinding APP modified polymeric water proofing membrane having weight not less than 3 kg per sqm with 100 mm wife side or end lap and joint sealed with flamed torched pasted over full length [e] Applying one coat of hot blown bitumen 85/25 grade @1.2 Kg per sqm. [f] Spread coarse sand over entire bitumen surface and than topping with 40 mm thick brick tiles laid over & including 15 mm thick screen bed in cement sand mortar 1:6 & joints shall be pointing with CM 1:3 complete all as specified and directed. Note :- Water proofing compound shall be measured & paid seperately.

Supply only integral water proofing compound complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate in levelling course, for floor benching etc, finished even & rough to receive cement mortar screen bed complete all as specified and directed.

S&F 18 mm thick celuka ply of single side prelam/ Rigidam colour fixed with screws , solvent cement/ adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets complete including complete fitting fixure all as specified and directed. (Density - 575 to 600 kg/CBM)(Make black cobra or equivalent in make as specified in PS)

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed.

Taking down main switches, distribution boards and cut outs etc. of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls complete all as specified and directed by Engineer-in-Charge.

Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories complete all as specified and directed.

M&L for wiring for light point/ fan point/ exhaust fan point/ call bell point with 2 run 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class unsheathed PVC conduit with switch, with cast iron/pressed steel terminal box etc. as required One light point controlled by one way switch 6 Amps including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site & including chases cutting making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

All as per item No. 171 above but cable 2.5 sqmm FRLS for one 5 pin 5 Amp socket outlet point on an independent board.

All as per item No. 171 above but cable 2.5 sqmm FRLS for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per item No. 172 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm.

All as per item No. 171 above but an independent board with cables of size 4.0sqmm (for Geyser & AC).

Supply & fixing switch Piano flush type 6 amps, single pole, one way complete all as specified and directed.

Supply & fixing socket outlet flush type suitable for 6 amp, 2/3 pin combination, complete all as specified and directed.

Supply & fixing switch Piano flush type 16 amps, single pole, one way complete all as specified and directed.

Supply & fixing socket outlet flush type suitable for 6/16 A, 2/3 pin combination, complete all as specified and directed.

S&F Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F LED retrofit lamp of capacity 12 watt, B-22 holder base with polycabonate body and aluminium heat sink warm white complete including taking down old/ unserveciable CFL/bulb complete all as specified and directed.

S&F LED retrofit Inverter lamp of capacity 9 watt,power backup upto 4 hrs B-22 holder base with polycabonate body and aluminium heat sink warm white complete including taking down old/ unserveciable CFL/bulb complete all as specified and directed.Make-Philips or techno commercial equivalent in approved make

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

Supply & fixing fan regulator, modular type, 120 watt single phase complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40Amp current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and directed.

S&F MCB Single Pole, 6 to 32 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed.

S&F 1x10W LED Mirror light fitting,2 feet, LED 6000K, Decorative Indirect up-down light for mirror and as wall light application with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed.

S&F for LED bulk head light fitting 9/10W LED 600 Lumen enclosed in polycarbonate body weather proof, LED lighting fixture with co extruded polycarbonate body environmental friendly energy efficient complete with all accessories prewired and making connection with and including 23/0. 0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed in wall firmly complete all as specified and directed .

S&F decorative wall mouting LED bed side lamp 9 Watt with cover plate and making electric connection all as specified and directed.

S&F LED tube light fittings of 18 wattage including rawl/plug ,making connection with and including 23/0 0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed to wall firmly, complete all as specified and directed.

S&F LED tube light fittings of 20 wattage with inbuilt battery backup including rawl/plug ,making connection with and including 23/0 0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed to wall firmly , complete all as specified and directed.

S&F in repair recess/surface mounting 36W 2'x2' LED slim panel (595x595mm) fittings including making connection with PVC insulated three core flexible copper conductor cable with connector block and making good the disturbed suface all as specified and directed. Make:- Surya Roshani Cat part No. LHEWAEPNIV1W036 or equivalent make as specified in list of make.

S&F 35 Watt road lighting luminaire with unique peanut optics to ensure uniform distribution, higher spacing between poles and maintenance free system for city roads and Streets, 50% Energy Savings, IP66 Protection PC and FG Cover, High Impact Resistance complete including LED Lamps and all accessories including bracket made out of 25mm bore GI pipe (light grade), 1.20 m long made to shape and fixed to existing pole or bldg by means of 2 Nos mild steel flat iron 40x6mm clamps with suitable size bolt, nuts & washers and connecting with three core flexible copper wire of size 23/0.0076 from ceiling rose to existing junction box complete all as specified and directed.

Supplying & Fixing GI electrode chemical earthing of high conductive, corrosion resistant, CPRI tested maintenance free chemical earthing pit to achive earth resistance value less than or equal to 3 Ohm & EN voltage < 02 V,pipe in pipe technology based in which primary conductor (Pipe) having 40 MM dia and primary conductor is inserted into secondray conductor having 80 MM dia. The primary conductor is inserted into secondory conductor and space between secondary and primary conductor of earthing electrode should be crystalline compound. The length of this electrodes is min 3000 MM (3 meters) and earth pit's bore hole should be of dia 200 to 250 mm and min depth 3.50 meters. Length of electrode will be increased with connecting of 25 x 4 mm GI strip extra,and total depth should not less than 3.50 meters. Around the earth electrode earth pit borehole should be backfilled with minimum 50 Kg of ground enhencement compound ERIC Contains mixture of Silica sulphate,Alumina, Iron Oxide, titanium Oxide, Calcium Oxide,Sodium Oxide, Zink Oxide etc. ). including RCC earthing pit having 450 x 450 Cl chamber cover all as directed by Engineer-in-Charge.( Note : If less than 3 Ohm result has not acheived at site the contractor is responsible to do grid system to achieve the desired result and no extra payment shall be made to the contractor for making grid system.). Make Remedies / MRS agency.Model G-80

S&F sub main wiring with two single core FRLS PVC insulated unsheathed multistranded copper conductor of size 6 Sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area FR PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 20mm dia 'medium grade' PVC concealed conduits and fittings, complete all as specified and directed. Note: One unit length shall measured as two run of main wire and one run of conduit & earth wire

Taking down carefully ceiling fan by disconnecting all electrical connection, sealing cable end, dismantling blades and removing fan and blades to store, complete all as specified and directed. Note: Existing fans shall be deposited by the contractor in AGE E/M Varanasi yard.

S&F exhaust fan heavy duty exhaust fan 250 mm sweep ,single phase 240 volt including making holes and electrical connection through wire of 3 core 23/0.0076 copper conductor marking MES No wirh paint including louver shutter and cutting hole if required complete all as specified and directed.

S&F exhaust fan heavy duty exhaust fan 450 mm sweep ,single phase 240 volt including making holes and electrical connection through wire of 3 core 23/0.0076 copper conductor marking MES No wirh paint including louver shutter and cutting hole if required complete all as specified and directed.

S&F in repair single pole & neutral enclosoure with a two pin and earth plug and socket with 1 MCB single pole 20 to 32amps 'C' series 10KA in sheet metal enclosure and connecting complete all as specified and directed.

Supply and fix sheet metal enclosure for VTPN double door DB 4 way incl 160A MCCB 4 pole complete all as specified and directed. by Engr-in-charge

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 Nos. blades, 30 cm long down rod, 2 Nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply earthing complete all as specified and directed.

S&F brass Fan Hook complete all as specified and directed.

Supply, laying, jointing and testing (in replacement) of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core, complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 M wide and not exceeding 1.5 Mtr deep and getting out including filling bottom surface to required level or slope for laying of pipes/ cables complete all as specified and directed.

Returning filling including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft soil complete all as specified and directed.

Removing excavated surplus soil not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.

M&L for sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed. Note : Punned thickness 18 cm shall be measured only.

Supply and laying dry well burnt locally available brick sub class 'B' modular bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as specified and directed.

M&L for bore hole for passing cable through / insertion of 80/50mm dia GI pipe under PCC road/ taxi track/ runway/ hard standing upto the depth 450mm to 1200 mm complete all as directed by Engineer-in-charge. Note :- (i) Cost of equipments, tools & plants,material required for boring shall be deemed to be included in unit quoted rates above. (ii) GI pipe 80/50 mm dia shall be measured and paid separetely.

S&F for 40 mm dia GI pipe 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing/hard standing including taking down old /unserveciable existing pipe complete all as specified and directed. Note : Excavation and earth work shall be measured & paid separately.

Supplying, installation and testing of energy efficient five star rating electric water heater 25 litres 2 KW (Geyser), ISI marked including fixing the water heater (geyser) on wall with and includng nuts bolts/anchoring bolts and making water /electric connection and making good disturbed surface of wall to match the existing complete all as specified and directed.

Supply and fixIing commissioning and testing hi wall split Air condition units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 electric driven, single phase of capacity of 1.5 TR complete all as specified and directed.

Supply and fix Voltage stablizer for automatic operation capacity 5 KVA complete all as specified and directed.

Supply and fixIing 35W oscillating wall mounting fan , 400 mm sweep 15 RPM silent BLDC remote control complete all as specified and directed.

Supply and fixIing commissioning and testing deep freezer single door glass top more the 405/425 ltr capacity complete all as specified and directed.

Supply and fixIing commissioning and testing refrigerator, electric driven (single phase), capacity more than 363/396 Litres.BEE 5 star rated complete all as specified and directed.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way modular switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with modular cover plate of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site & including chases cutting & making good disturbed surface & applying finishes to match existing surface, complete all as specified and directed.

All as item No. 218 above but one 3 pin, 5amp socket out let on independent board complete all as specified and directed.

All as per item No. 218 above but 3pin ,5amp socket out let on the same board with other switch complete all as specified and directed.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 2.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way modular switch, including concealed pressed steel/PVC terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with modular cover plate of required colour for mounting switch, sockets, fan regulator etc including 2.5 Sqmm FRLS type PVC insulated unsheathed cable solid copper conductor as continuous earth wire and connected to earth dolly as required at site & including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

M&L sub main wiring with two single core PVC insulated & unsheathed cable 4.0 Sqmm (nominal area) FRLS type having multi-stranded copper conductor drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring with and including 4.0 Sqmm FRLS type PVC insulated unsheathed cable solid copper conductor as earth wire connected to common earth as per IS & cutting chasing for conduit & sinking for boxes & making good to walls disturbed surface & applying finishes to match existing surface complete including taking down of exsting sub main wiring complete all as specified and directed. Note : Two runs of 4 Sqmm and one run of 4.0 Sqmm cable and PVC conduit shall be measured as a one unit length.

M&L sub main wiring with two single core PVC insulated & unsheathed cable 6.0 Sqmm (nominal area) FRLS type having multi-stranded copper conductor drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring with and including 4.0 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as earth wire connected to common earth as per IS & cutting chasing for conduit & sinking for boxes & making good to walls disturbed surface & applying finishes to match existing surface complete including taking down of exsting sub main wiring complete all as specified and directed. Note :- Two runs of 6 Sqmm and one run of 4.0 Sqmm cable and PVC conduit shall be measured as a one unit length.

S&F Modular switch 1 way 6A,1 module 230 volt, complete all as specified and directed.

S&F Modular Socket, 6A - 3 pin combined 2 module, complete all as specified and directed.

S&F Modular Socket 6A/16A-3 pin combined 2 module,multipurpose type 240 volts complete all as specified and directed.

S&F Modular switch 1 way 16A, 1 module 240 volts complete all as specified and directed.

S&F Modular Bell push 6A 1 module complete all as specified and directed.

S&F for bell, ding- dong , AC, 230 Volt, single pole complete all as specified and directed.

S&F stepped type electronic fan regulator modular type AC 230 volt suitable for any type of ceiling fan complete all as specified and directed.

S&F lamp holder PVC/Polycorbonate type with cord grip cap/back plate suitable for batten/angle /pendent fitting complete all as specified and directed.

S&F ceiling rose single phase, PVC poly carbonate,insulated body three terminals ISI marked complete all as specified and directed.

S& F for sheet metal enclousre factory made for MCB DB's SPN, 8 way, double door, 240 Volts with 200 Amp rated bus bars including taking down existing unserviceable MCB DB complete all as specified and directed.

S&F Isolator/MCB SP 240 Volt 6 TO 32 Amp ISI marked conforming to 'B" curve, breaking capacity 10 KA complete all as specified and directed.

S&F Isolator SPN 40 amp 30mA for earth leakage.Over load and short circuit protection ISI marked complete all as specified and directed.

S&F sheet metal enclosure for VTPN DB double door 415 Volt with 200 amp rated bus bar complete 4 Way with suitable for 1 x 63Amp MCCB as incomer and MCB SPN as outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs complete all as specified and directed.

S&F MCCB 63 Amp,4 pole ,415 Volt ISI marked conforming to 'B" curve, breaking capacity 16 KA complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL with top edge of plate not less than 1.50 m below normal ground level) connected to galavanised earth lead wire 4.0 mm dia (7.5m) as means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, GI pipe (ISImark) light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate ) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover 1:2:4 , type B-1(using 20 mm graded crushed stone aggregate ) reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade(ISI marked) for watering all as shown in electrical plate No 3 of SSR Part-I and connected to earth test point including testing of earthing & dismantling /taking down existing old / unserveciable earthing complete all as specified and directed. Note:- The rates quoted shall also deemed to include the cost of Earth test point and earth wire and protection pipe upto 7.5 meter beyond the earth plates electrode.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including connection,complete all as specified and directed.

S&F LED integral ultra slim round shape surface mounting high power LED luminaire , dome shape opal diffuser lamp of capacity 18w complete including taking down old/ unserveciable CFL/bulb all as specified and directed.

S&F wall lamp/comet wall light unique Aesthetic white colour having suitable holder for B-22 Bulb complete including taking down old/ unserveciable CFL/bulb holder all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete including taking down the existing unserviceable light/mirror fittings all as specified and directed

Supply & fix exhaust fans of metallic body heavy duty AC single phase 230/ 240 V of size 300 mm sweep with bracket, louver shutters, nuts & bolts including connection with PVC copper flexible wire for Exhaust fans, complete all as per specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed.

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as per specified and directed.

Supplying ,laying, commissioning & testing cross sectional area 25 Sqmm , 3.5 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down existing old /unserveciable cable complete all as specified & directed. Note: Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item

S&F for 50 mm dia GI pipe 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing/hard standing including taking out old /unserveciable existing pipe complete all as specified and directed. Note :- Excavation and earth work shall be measured & paid separately.

R.K.ASSOCIATES (BID ID -3324778)

SHIV SHANKAR MISHRA (BID ID -3328396)