Improvements to electric sub station at water supply scheme Melhura Wachi.

Amount

Providing and fitting G.I Channel /Angle/ Flat of sizes including clamps

Supply, installation, erection of 9 mtrs long H.T pole of specifications. The job further includes drilling of holes for installation of various accessories wherever required .The job further includes G.I wire earthing of pole as per REC standard.

P/F of Galvanized nuts, bolts of various sizes as per site requirement.

Providing and fitting of Galvanized stay set with 50 X 8 mm Stay Clamp , Guy insulator (2no.), Anchor plate (200X200X6mm) , nuts and bolts , 2 N0- turn buckle , 1.8 m long , 16 mm diameter solid G.I stay rod & 7/3.15 mm dia. G.I stranded wire complete.

Providing and fitting of ACSR as per IS 398 (part-2) 1996 for 50 sq.mm ACSR (Galvanised steel reinforced) for fitment of various accessories

Supply, Installation and Testing of 35 Sq mm XLPE Aluminum H.T cable (ABC type ) of 11 KV grade with following specs. Size (cross sectional area in sq mm) = 3×35 Phases: Red, Yellow, Blue

Providing and fitting of suspension/ tension clamp with I Eye Hooks required for holding of 3 – Core , 35 Sq. mm H.T AB Cable.

P/F of 11 KV cable termination kit for connecting 35 Sq mm XLPE cable (ABC type) with the existing HT line near tapping point and HT transformer.

Earth work in excavation by manual means in trenches for foundation , drains ,pipes , cables (not exceeding 1.5 m in width ) and for shafts , wells , cesspits and the like not exceeding 10 sqm on plan , including dressing of sides and reaming of bottom lift upto 1.5 m , including getting out excavated earth and disposal of surplus excavated earth as directed. all kinds of soil

Providing and laying of soling stone including manual compaction

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering, all work upto plinth level with 1: 2 : 4mix ( 1 cement , 2 coarse sand , 4 graded stone aggregate 20 mm nominal size)

Dismantling the existing HT transformer from existing damaged bed and dragging it to the newly constructed bed as per above specifications. The job is done manually by skilled labour. Job includes putting in position the HT transformer on the new bed and reconnecting the same with the system and successful commissioning. Job also includes topping up of A grade T.oil ( 50 ltrs) to the HT transformer.

M/S SHALIMAR ENGINEERING WORKS