SPL REPAIR TO BLDG NO 197 (OR MD ACCN) OF 223 FWC EME WKSP UNDER GE (EAST) LUCKNOW

Demolition of cement concrete (unreinforced) in any position n.exc 15 cm thickness below and above ground level, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position as in roofs, floors (other than ground floors) and similar works.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles.

M & L for brick work using old size fly ash brick, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and directed.

Ditto all as item No 4 above but except bricks (old bricks retrived from demolition shall be used)

M & L for brick work with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4, complete all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

M&L for Self Curing Ready Mix Plaster of thickness 10 mm to 15 mm, pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on Internal surfaces of walls, at any height with necessary scafolding surface finished even and smooth and preparing for plastering the wall surface with white cement based polymer modified all complete as per the direction of Engineer-in-Charge.

M&L for Self Curing Ready Mix Plaster of thickness 12 mm to 15 mm, pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on external surfaces of walls, chajja, facia at any height with necessary scafolding surface finished even and smooth and preparing for plastering the wall surface with white cement based polymer modified all complete as per the direction of Engineer-in-Charge.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm Note- Primer and emmulsion to be carried out through air less spray machine (Mechanical means)