PROVISION OF AUTOMATIC RISING BOOM BARRIER WITH ALLIED FACILITIES AND STREET LIGHTS AT RATNAGIRI MAZGAON APPROACH ROAD AT ICGAS RATNAGIRI

Amount

Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of size 4 core16 sq mm.Note: Rate is inclusive of cable glands and cable lugs.

Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of size 4 core10 sq mm.Note: Rate is inclusive of cable glands and cable lugs.

Earth work in excavation for ordinary rock by mechanical means(Hydraulic excavator)/ for laying of cables (not exeeding 1.5 min width or 10 sqm onplan), including dressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Returning, filling in including spreading, leveling and well ramming in layers not exceeding 25 cm for soft/disintegrated soil.

Steel tubing GI light grade 50 mm dia for cable protection passing under road /floor or for fixing to poles all as specified and as directed .

Supply and laying DWC (Double wall Corrugated ) duct pipe outer dia 63 mm and inner dia 50 mm conforming IS 16205 (Part 24 ) for protection of electric cable complete all as specified and directed.

Supply and fixing LED post top with spun aluminum housing for Lamp and reflector assembly with clear polycarbonate cover IP65 protection, along with Pole with base plate of 6 mtr height with and the external surface of the pole shall be finished by polyurethene paint( more than 50 microns) Fin less design LED streetlight 65/70 watt with pressurised die-cast housing LM6 alloy and polycarbonate cover with IK07 impact resistance including mcb SP 6 Amp- 1No & 4 way connector for each pole. It should have 10kV external surge protection. The product to have life of 50000 hours and designed to operate from -10 to +45 degree celsius. Protection: High voltage cutoff & restart @ 320V +/- 15V and phase to phase 440V protection for 8 hrs is mandatory. The luminaire should have CRI 70.The driver should be potted to protect againt moisture. Make of luminare Bajaj Cat. Part No.112680 BNRRLand pole Cat part No: BJPL 01 6M ECO P or equivalent model of Crompton/surya/Havells. Note: RCC/PCC Foundation of poles are as per manufacturer recommendation. The rate is deemed to be included in quoted rate. The foundation drawing shall be got approved from GE before execution of work.

M&L forEarthing complete with galvanisedsteel pipe electrode, 40mm bore,medium grade, 2.5 metres length,buried directly and preferablyvertically in ground with top edgenot less than 1.25 metres belowground level connected withearthing lead of 4mm dia galvanisediron or steel wire all as shown in Plate No. 2 to the earthing test pointall as specified and indicatedincluding testing on completion

Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth lead 32X6 mm dia by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal common salt ,earth wire 4 mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long,,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No-5 of SSR-2014 (part-I)

Supply and fixing post top lantern LED type 40watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete withdriver and lamp complete

(a)Supply and fixing commissioning of Electromechanical type boom Barrier up to 6 Meter boom length, Woring temperatute: -30 +70, Opening/Closing time 1.5-6 Secs, IP 54 Protection Level, Power supply DC24V, AC 220V/110V, 50/60Hz ,160W, DC Brushless Motor, Output Torque 56.8 Nm Photocell Safety Sensor, Manual Operation Push Button, Boom Rest to support boom in down condition Electric Barrier High Speed, Heavy Duty. 6 Mtr Long (Aluminum Hollow Sections 6 m long /Octagonal shape) Brand with Remote Control Side Stand , Manual Switch,reflector with connecting items. (b) Supply and Fixing and commissioning of Tyre killer with following assessories: Material:A3Steel(carbonsteel), Length:6Meters, Width:520mm, Height:70-90mm, Max loading weight:80T, Spike Height : 150 mm, Spike thickness : 10 mm, Electromechanical Device, IPrate:IP67,Control mode : Short range wireless remote control/drive - by - wire, Control distance:≤100M with Remote control distance : within 50M, Dimension:4000x550x80mm (c) cat 6 cable 100 rm (d) Installation, Testing and Commissioning Charge ( e ) if any minor parts required for functional of the system is deemed to include in the rate . Note: Necessary civil work such as trenching, PCC and cutti9ng of road and making good surface are deemed in the quoted rate for installation of boom barrier and tyre killer.

S & F MCB DB double door IP 54 SPN 4 way sheet steel, phospetised, powder painted with 200 Amps rated bas bar, neutral link, earth bar and Din rail suitable for 240 Volt complete all as specified.

S &F MCB SPN 32 to 60 Amps 240 volts 10 KA "C" Curve rating complete with connection testing and commissioning.

S&F MCB SP 06 to 32 Amps 240 Volts 10 KA " C" curve complete with connection testing and commissioning.

K M SUBHANAIAH

M/s ASPIRE ENGINEERING ENTERPRISES

Raiban Electrical Solution

JMN Infotech Pvt Ltd