Supply and fixing of Mechanical Engineering Research Laboratory Furniture(RP-157) of New Academic Block

RESEARCH LAB, MECHANICAL ENGINEERING, SMVD UNIVERSITY KATRA

TABLE FOR CABIN - Providing and placing of Main Table with overall size of table shall be 1500 Width mm X 750 Depth mm X 740 Height mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The work top shall have the size 1500mm X 750mm made up of 25mm thick particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The table top profile shall be in rectangle shape with front and back full round post form and other edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The table top shall be supported over particle board base gable end. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 25mm thick particle board and profile shall be in linear shape with front and back full round post form and other edge with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick pre-laminated particle board with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. A mobile pedestal shall be provided with an overall size 400mm X 450mm X 660mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel having to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor. Dimensions Tolerance + 20 mm.

TABLE FOR FACULTY CABIN - Providing and placing of Main Table with overall size of table shall be 2000 Width mm X 750 Depth mm X 740 Height mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The work top shall have the size 1500mm X 750mm made up of 25mm thick particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The table top profile shall be in rectangle shape with front and back full round post form and other edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The table top shall be supported over particle board base gable end. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 25mm thick particle board and profile shall be in linear shape with front and back full round post form and other edge with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick pre-laminated particle board with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. A mobile pedestal shall be provided with an overall size 400mm X 450mm X 660mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel having to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor.Dimensions Tolerance + 20 mm.

CHAIR FOR CABIN & FACULTY ROOMS - Supplying and placing ergonomically designed, comfortable & aesthetically appealing Medium back chair. The seat shall be made of 15mm thick hot pressed malaysian plywood with HR polyurethane foam 50mm thick having density 40kg/m³ upholstered with leatherite tapestry in black colour with 0.8mm thick and 535 GSM and the back shall be made of double layered malaysian moulded hot pressed plywood (12+6)mm thick with HR polyurethane foam 30mm thick having density 32kg/m³ upholstered with leatherite tapestry in black colour with 0.8mm thick and 535 GSM. Seat and back shall be joined with HR steel sheet. The armrest shall be used PP arm fixed type completely joint with seat. The chair shall have synchro knee tilt revolving mechanism with four position locking and tilt tension adjustment. The pneumatic seat height adjustable 100mm with BIFMA standard class-3 gaslift. The Pedestal shall be made up of injection moulded black nylon having pitch circle Dia 700 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movemen with BIFMA standards. The Seat size shall be 480±10mm(W) X 495±10mm(D) and back size shall be 590±10mm(H) from seat & overall height = 1030±10mm. Dimensions Tolerance + 20 mm.

EXECUTIVE TABLE FOR CABIN 3 - Supplying & installing of table with ERU and pedestal having following specifications. The table shall be supplied in completely knock down conditions with an overall size W1800 X D1800 X H750mm that is to be assembled at site. The worktop shall have the size 1800 X 900mm made up of 50mm thick PLPB with approved laminate and finish as per approved shade. The top edge should cladded with 1.2mm thick extruded aluminium section all around the worktop and die cast end caps on joints for better strength of the table. The profile shall be in rectangle shape and enclosed by flapper box for electric provision. The top shall be supported on gable end. The end wall of the table on the side shall be topped by gable end. It should be 50mm thick Medium Density Fibre-board linear in profile and the edges cladd with extruded aluminium profile. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick particle board and shall be linear in profile. The table shall be supplied with credenza unit with an overall size 900mm X 450mmmm that shall be constructed from Pre-laminated particle board of grade II of IS 12823 with 25mm thick top and other parts 18mm thick like shutter, back, facia etc. The drawer and shutter shall be operated with ball bearing sliding channel and concealed crank hinge. G-profile Aluminium handle shall be supplied for ease of opening. The ERU unit shall be mounted on 38mm Dia. leg. Fixed pedestal shall be supplied with an overall size 380mm X 400mm X 600mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Top shall be 25mm thick, side, back, facia shall be 18mm thick. The pedestal shall have 2 nos. of drawer having same. The drawer shall be operated with ball bearing sliding channel to enable smooth operation. Aluminium handle shall be provided for ease of opening. For locking provision central lock mechanism shall be given in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted on Aluminium round leg. Dimensions Tolerance + 20 mm.

EXECUTIVE CHAIR FOR CABIN 3- Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back frame shall be made up of the combination of 15mm thick hot pressed commercial plywood and ply-board padded with high resilience polyurethane foam (50+25+30)mm thick having density (40, 32 & 32)kg/m³ in seat and (30+25)mm thick having density (32, 32)kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support as well as head support. Seat and back shall be covered with polished wooden at both side for decorative appearance. The chair shall be supplied with natural wood arm having melamine polish and die cast aluminium end caps. For seating durability the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The Hydraulic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have metal insert CRCA covered with natural wood having pitch circle dia. 630 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 510±10 mm(D) X 510±10 mm(W) and back size shall be 525±10 mm(W) X 710±10 mm(H) from seat. Overall height shall be = 1170±10 mm & overall width/depth = 740±10 mm.. Dimensions Tolerance + 20 mm.

VISITOR CHAIR FOR CABIN 3 - Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back frame shall be made up of the combination of 15mm thick hot pressed commercial plywood and ply-board padded with high resilience polyurethane foam (50+25+30)mm thick having density (40, 32 & 32)kg/m³ in seat and (30+25)mm thick having density (32, 32)kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support as well as head support. Seat and back shall be covered with polished wooden at both side for decorative appearance. The chair shall be supplied with natural wood arm having melamine polish and die cast aluminium end caps. The frame structure shall be cantilever support type made of MS CRCA powder coated 50-60µ (DFT) thick round pipe of dia. 28.5mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The Seat size shall be 480±10 mm(D) X 510±10 mm(W) and back size shall be 520±10 mm(W) X 580±10 mm(H) from seat. Overall height shall be = 1030±10 mm, overall depth = 620±10 mm & overall width = 620±10 mm. Dimensions Tolerance + 20 mm.

2-SEATER SOFA FOR CABIN 3 - Supplying and placing two seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 40Kg/m³. The complete structure shall be upholstered with leatherite tapestry 1±0.2 mm thick and 571 GSM. The understructure shall consist of SS 202 grade loop leg with shiny chrome finish having cross-section area 40mm X 20mm with 1.6mm thick. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 510±10 mm(D) X 1040±10 mm(W), seat height = 435±10 mm, overall width = 1360±10 mm, overall depth = 770±10 mm & overall height = 800±10 mm. Dimensions Tolerance + 20 mm.

CENTRE TABLE FOR CABIN 3 - Providing and supplying centre table with an overall size 1200mm X 600mm X 430mm. The top and side cladding shall be made up of 36mm thick pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. Extruded aluminium section shall be inserted within side corner edge at both side of the table. There shall be leveller shoe provided at the bottom. Dimensions Tolerance + 20 mm. The participating brand must have all the prevalent quality & safety related certifications like ISO: 9001, ISO:50001, ISO:14001 & ISO: 45001 by NABCB, BIFMA Membership, AIOTA & Greenguard Certification has to be submitted.

CORNER TABLE FOR CABIN 3 - Providing and supplying centre table with an overall size 600mm X 600mm X 430mm. The top and side cladding shall be made up of 36mm thick pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. Extruded aluminium section shall be inserted within side corner edge at both side of the table. There shall be leveller shoe provided at the bottom. Dimensions Tolerance + 20 mm.