Construction of boundary wall with main gate at Malatipur Hospital under Malatipur G.P., Mouza- Kashipara, J.L.-123, Chanchal-II Dev. Block, Malda. . (Activity Code-127284444) Sl.no-24

MAIN GATE & SMAL GATE:- Earth work in excavation of foundation trenches etc. in all sorts of soil (including mixed soil but excluding Laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom properly including bailing /pumping out water from the bed, as required & directed by the Engineer-in-charge, complete. With depth of excavation not exceeding 1.50 m.

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powered earth or local sand, as per direction of Engineer-in-Charge.

Earth work in in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm including watering and ramming etc layer by layer complete

Filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm including watering and ramming etc layer by layer complete

Cement Concrete ( Mix 3:1.5:1) with graded stone Chips (40 mm size) excluding shuttering & reinforcement, if any, in Ground floor as per IS 456-2000. Using Stone material of Rajmahal variety.

Ordinary Cement Concrete ( Mix 1:2:4) with graded stone Chips (20 mm size) excluding shuttering & reinforcement, if any, in Ground floor as per IS 456-2000. Using Stone material of Rajmahal variety.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. Tor / Mild Steel.

Hire and Labour Charges for shuttering with hard wood for for precast R.C. Slab curved or Straight and striking out the same including fitting, fixing the precast …............................................... Complete in allm respect.

Hire and Labour Charges for shuttering with centering and necessary staging up to 4 m using approved stout props and thick hard wood planks of approved thickness with required bracings for concrete slabs, beams, columns, lintels, curved or straight including fitting, fixing and striking out after completion of works. Using 25 mm to 30 mm thick wooden shuttering as per direction of EIC, complete.

Hire and Labour Charges for shuttering with centering and necessary staging up to 4 m using approved stout props and thick hard wood planks of approved thickness with required bracings for concrete slabs, beams, columns, lintels, curved or straight including fitting, fixing and striking out after completion of works. B ) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-in-Charge

S/F/F best quality digital printed Ceramic tiles in Coloured decorative on walls and floors to match with the existing work & 4 nos. keys ….................................. All complete as per direction

M.S. or W. I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows,railing etc fitted & fixed with necessary screws and lugs.

Priming one coat on steel or other metal surface with Synthetic Enamel / oil bound primer of approved quality including smoothening surface by sand papering etc.

Priming one coat on steel or other metal surface with Synthetic Enamel / oil bound primer of approved quality including smoothening surface by sand papering etc.

BOUNDARY:- Earth work in excavation of foundation trenches etc. in all sorts of soil (including mixed soil but excluding Laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom properly including bailing /pumping out water from the bed, as required & directed by the Engineer-in-charge, complete. With depth of excavation not exceeding 1.50 m.

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powered earth or local sand, as per direction of Engineer-in-Charge.

Cement Concrete with graded stone ballast (40 mm size) excluding shuttering etc. as per direction of Engineer-in-charge, complete. In 6:3:1 proportion.

Ordinary Cement Concrete ( Mix 3:1.5:1) with graded stone Chips (20 mm size) excluding shuttering & reinforcement, if any, in Ground floor as per IS 456-2000. Using Stone material of Rajmahal variety.

Brick work with 1st class bricks in cement mortar (6:1) in Foundation and Plinth

Hire and Labour Charges for shuttering with centering and necessary staging up to 4 m using approved stout props and thick hard wood planks of approved thickness with required bracings for concrete slabs, beams, columns, lintels, curved or straight including fitting, fixing and striking out after completion of works. Using 25 mm to 30 mm thick wooden shuttering as per direction of EIC, complete.

B ) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-in-Charge

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. Tor / Mild Steel.

Earth work in in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm including watering and ramming etc layer by layer complete

125 mm thick Brick work with 1st class brick in Cement Mortar (4:1).

Plaster ( to wall, floor,ceiling etc. ) with sand cement mortar including Rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface, including threading nosing and drip Course where necessary.

Applying decorative cement based paint of approved quality including cleaning the surface including scraping the same thorougly ( plastered or concrete surface ) as per manufacturer's specification.

Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision)..

Sub Total