Stage Contract for Creation / Augmentations of Substations of various capacities AND Impr. / Erection of HT / LT network under various Schemes for the FY 21-22 falling under jurisdiction of KPDCL OM Div. SHOPIAN ON TURNKEY/PARTIAL TURNKEY BASIS

Amount

Providing, Errection,testing & commissioning of 11 Mtr long ST Poles 410, SP-56 including Transportation, manual, mechanical carriage, delivery at Site with pit excavation, refilling the pit with soil, boulders.

Providing, Errection,testing & commissioning of 9 Mtr long ST Poles 410, SP-33 including Transportation, manual, mechanical carriage, delivery at Site with pit excavation, refilling the pit with soil, boulders.

Providing,Errection,testing & commissioning of 8 Mtr long ST Poles 410, SP-15 including Transportation, manual, mechanical carriage, delivery at Site with pit excavation, refilling the pit with soil, boulders.

Providing & fixing of pole earthing as per REC standard as per J-1 (spiral earthing) drawing

Supply and painting of each Pole 1 coat red oxide paint and 2 coats of aluminium paint (@ 1 ltr/pole red oxide paint and 1 ltr/pole aluminium paint) inscribed with permanent marking on each pole "Name of scheme-2019-20/xx" (xx mean pole numbers say 01,02...) in white paint in backgound of green paint at conspicious place. The paint shall have to be sprayed not brushed.

Providing, errection, testing & commissioning of channel cross arms, V-Cross arms, Sub-station channels & Angle Iron Braces, transformer beltings, including back clamps for fixing cross arms etc fabricated out of Galvanized Iron of different sizes (REC Standard) & to be fixed with GI Nuts & Bolts and washers.

Providing, errection, testing & commissioning of channel cross arms, V-Cross arms, Sub-station channels & Angle Iron Braces, transformer beltings, including back clamps for fixing cross arms etc fabricated out of Mild Steel of different sizes (REC Standard) & to be fixed with GI Nuts & Bolts and washers.

Providing & and fixing of 11 kV Pin Insulators (polymer) with Pins ( 5 KN)

Providing & fixing of 11 kV, G.O AB Switch , 3-phase, 200A (09 insulator post type) with arragement for pad locks & operating rod . The operating rod should be G.I Pipe (B-class) of 25 mm dia of requisite length.

Providing & fixing of 11 kV Horn, Gap Fuse 3-phase 100A

Providing & fixing of 11KV Link set 3-phase, 200 A (station type)

Providing & fixing Supply and installation of Gapless Surge Arrestor,9 kV,10 kA, LA with (polymer) housing, Station Type

Providing & fixing of 11 kV Disc Insulators (polymer) Complete with fitting( 45 KN)

Providing & fixing of Single Core Aluminum (Al.) LT Power Cable (1.1 KV grade) 400 mm sq cross section un-armoured XLPE cable with Thermoplastic tape inner sheath from the LT bushes upto the overhead LT bare conductor.

Providing & fixing of Single Core Aluminum (Al.) LT Power Cable (1.1 KV grade) 300 mm sq cross section un-armoured XLPE cable with Thermoplastic tape inner sheath from the LT bushes upto the overhead LT bare conductor.

Providing & fixing of Single Core Aluminum (Al.) LT Power Cable (1.1 KV grade) 185 mm sq cross section un-armoured XLPE cable with Thermoplastic tape inner sheath from the LT bushes upto the overhead LT bare conductor.

Providing & fixing of Single Core Aluminum (Al.) LT Power Cable (1.1 KV grade) 95 mm sq cross section un-armoured XLPE cable with Thermoplastic tape inner sheath from the LT bushes upto the overhead LT bare conductor.

Providing & fixing of Single Core Aluminum (Al.) LT Power Cable (1.1 KV grade) 50 mm sq cross section un-armoured XLPE cable with Thermoplastic tape inner sheath from the LT bushes upto the overhead LT bare conductor.

Providing & fixing of Single Core Aluminum (Al.) LT Power Cable (1.1 KV grade) 35 mm sq cross section un-armoured XLPE cable with Thermoplastic tape inner sheath from the LT bushes upto the overhead LT bare conductor.

Providing, laying, testing & commissioning of 3x35mm sq +1x105mm sq 11kV grade 11 KV (E) Grade Aerial Bunched Cable with 03(three) power cores stranded, compacted circular Aluminium conductor screened with Black extruded semi conducting compound, natural coloured XPLE insulated core screened with Black extruded semi conducting compound and one layer of copper tape and covered with Black extruded PVC (core identification by ridges one, two and three over PVC covering) and one bare Messenger wire: combination of galvanized steel wire and Al. Alloy wires.

Providing, laying, testing & commissioning of 3x50mm sq +1x70mm sq 11kV grade 11 KV (E) Grade Aerial Bunched Cable with 03(three) power cores stranded, compacted circular Aluminium conductor screened with Black extruded semi conducting compound, natural coloured XPLE insulated core screened with Black extruded semi conducting compound and one layer of copper tape and covered with Black extruded PVC (core identification by ridges one, two and three over PVC covering) and one bare Messenger wire: combination of galvanized steel wire and Al. Alloy wires.

Providing, laying, testing & commissioning of 3x70mm sq +1x95mm sq 11kV grade 11 KV (E) Grade Aerial Bunched Cable with 03(three) power cores stranded, compacted circular Aluminium conductor screened with Black extruded semi conducting compound, natural coloured XPLE insulated core screened with Black extruded semi conducting compound and one layer of copper tape and covered with Black extruded PVC (core identification by ridges one, two and three over PVC covering) and one bare Messenger wire: combination of galvanized steel wire and Al. Alloy wires.

Providing, laying, testing & commissioning of 3x120mm sq +1x95mm sq 11kV grade 11 KV (E) Grade Aerial Bunched Cable with 03(three) power cores stranded, compacted circular Aluminium conductor screened with Black extruded semi conducting compound, natural coloured XPLE insulated core screened with Black extruded semi conducting compound and one layer of copper tape and covered with Black extruded PVC (core identification by ridges one, two and three over PVC covering) and one bare Messenger wire: combination of galvanized steel wire and Al. Alloy wires.

Providing, fixing , testing & commissioning of cable kits ( heat shrinkable)

Providing, fixing , testing & commissioning of cable kits ( push on type)

Providing & fixing of Suspension/Tension clamps with eye hooks assembly

Providing & fixing of Dead end clamps

Providing and fixing of Anticlimbing devices on poles of GI barbed wire type devices). At-least 3.5 kgs GI barbed wire(12 SWG)

Providing and fixing of Danger Plates on poles with clamps and writing in English and Regional Language

Providing & fixing of Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete as per REC standard.

Providing, laying of Cement bottoming 1:2:4 mix as per REC standards 0.5/0.45 cum/pole including muffing 20 cm above ground level, plaster and curing of concrete.FOR 9 MTR/8 MTR. Poles

Providing & fixing of 300 mm sq Aluminum Thimbles for cable terminations

Providing & fixing of 185 mm sq Aluminum Thimbles for cable terminations

Providing & fixing of 120 mm sq Aluminum Thimbles for cable terminations

Providing & fixing of 95 mm sq Aluminum Thimbles for cable terminations

Providing and and fixing of 3 No. sub station earthing by GI Pipe 40 mm or GI Rod 20mm, 2.5 mtr long through GI Strip of 50X6 for neutral earthing and 25X3 mm for 2 transformer body earth, two no. pole earth, 1 no. LA Earth and 1 no. GO handle earth as per REC approved construction standards with F5, F10 & J2 drawings issued by REC as reference. Each electrode to be connected through double GI strips to be fixed on baby insulators. The termination should be bolted and not welded.

Providing and fixing of shackle insulators Shackle Insulators (Porcealin) ( 16 KN) with LT U Clamps complete

Providing & and fixing of 11 kV Pin Insulators (porcealin) with G.I. Pins ( 5 KN)

Providing and fixing of shackle insulators Shackle Insulators (polymer) ( 16 KN) with GI back clamps to be fixed without drilling/punching of poles on ST poles.

Providing, Laying, stringing, tensioning and binding of conductor ACSR 0.1 including pre-tensioning for removal of kinks, fixing of hardware fittings and jointing as per standard practices

Providing, Laying, stringing, tensioning and binding of conductor ACSR 0.05 including pre-tensioning for removal of kinks, fixing of hardware fittings and jointing as per standard practices

Providing, Laying, stringing, tensioning and binding of conductor ACSR 0.0.3 including pre-tensioning for removal of kinks, fixing of hardware fittings and jointing as per standard practices

Loading, Transportation, Errection,testing & commissioning, Carriage and Delivery at Site of 11 Mtr long ST Poles SP-56 including excavation of pole pits, refilling the pit with soil, boulders.

Loading, Transportation, Errection,testing & commissioning ,Carriage and Delivery at Site of 9 Mtr long ST Poles SP-33 including excavation of pole pits, refilling the pit with soil, boulders.

Loading, Transportation, Errection,testing & commissioning, Carriage and Delivery at Site of 8 Mtr long ST Poles SP-15 including excavation of pole pits, refilling the pit with soil, boulders.

Loading, Transportation, Errection, testing & commissioning, Carriage and Delivery at Site of 8 Mtr long PCC Poles with excavation of pole pits with inscription of permenent marking on each pole "Name of scheme-2019-20/xx" (xxx mean pole numbers say 01,02...) in white paint in backgound of green paint at conspicious place

Providing & fixing of 11 kV Disc Insulators (porcealin) type with G.I fittings( 45 KN)

Loading, Transportation, Installation, Testing, Commissioning of 25 kVA Distribution Transformer including mechanical/manual carriage upto site of installation and fixing of all fittings and jumpers

Loading, Transportation, Installation, Testing, Commissioning of 63/100 kVA Distribution Transformer including mechanical/manual carriage upto site of installation and fixing of all fittings and jumpers

Loading, Transportation, Installation, Testing, Commissioning of 200/250/400 kVA Distribution Transformer including mechanical/manual carriage upto site of installation and fixing of all fittings and jumpers

Loading, Transportation, Laying, stringing, tensioning and binding of conductor ACSR 0.1 including pre-tensioning for removal of kinks, fixing of hardware fittings and jointing as per standard practices and mechanical/manual carriage upto site.

Loading, Transportation, Laying, stringing, tensioning and binding of conductor ACSR 0.05 including pre-tensioning for removal of kinks, fixing of hardware fittings and jointing as per standard practices and mechanical/manual carriage upto site.

Loading, Transportation, Laying, stringing, tensioning and binding of conductor ACSR 0.03 including pre-tensioning for removal of kinks, fixing of hardware fittings and jointing as per standard practices and mechanical/manual carriage upto site.

Errection, testing & commissioning of channel cross arm, V-Cross arms, Sub-station channels & Angle Iron Braces, transformer beltings etc to be fabricated out of Mild Steel of different sizes & to be fixed with GI Nuts & Bolts and washers.

Dismentling of 11 Mtr long ST Poles including carriage to divisional stores,

Dismentling of of 9 Mtr long ST Poles including carriage to divisional stores,

Dismentling of of 8 Mtr long ST Poles including carriage to divisional stores,

Dismentling of of PCC Poles including carriage to divisional stores without damaging / breaking the pole. If the pole gets damaged no payment will be made.

Dismentling of of wooden Poles including carriage to divisional stores,

Repositioning of 11 mt ST tilted poles

Repositioning of 9 mt ST tilted poles

Repositioning of 8 mt ST tilted poles

Repositioning of PCC tilted poles

Repositioning of tilted wooden poles

Dismantling of conductor ACSR 0.1 including hardware fittings and returning the dismantled material to stores.

Dismantling of conductor ACSR 0.05 including hardware fittings and returning the dismantled material to stores.

Dismantling of conductor ACSR 0.03 including hardware fittings and returning the dismantled material to stores.

Re-stringing, tensioning and binding of DISMANTALLED CONDUCTOR conductor ACSR 0.1 including fixing of hardware fittings and jointing as per standard practices

Re-stringing, tensioning and binding of conductor ACSR 0.05 including fixing of hardware fittings and jointing as per standard practices

Re-stringing, tensioning and binding of conductor ACSR 0.03 including fixing of hardware fittings and jointing as per standard practices

Branch cutting /PRUNNING OF TREES

Dismantalling ,Dragging Loading ,unloading of ST 9 mtr long Poles and transportation and re errection of the same at new sites

Dismantalling ,Dragging Loading ,unloading of ST 8 mtr long Poles and transportation and re errection of the same at new sites

Dismantalling,Dragging & reinstallation of old 250 KVA Transformer

Dismantalling,Dragging & reinstallation of old 63/100 KVA Transformer

Supplying and fixing of pole Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip(25x3) to each HT pole including supply and welding of GI channel 70x40x150 on pole for earth connection

DISMANTALLING OF OLD CROSS ARMS AND ITS FIXING

DISMANTALLING OF OLD PORCELENE/POLYMER INSULATORS AND ITS REFIXING OF SAME

DISMANTALLING OF 11 KV LA SETS/DO SET/LINK SET ITS REFIXING OF SAME ALONG WITH CHANNEL FIXING

M/S REYAZ ELECTRICALS

southern