REPAIR/REPLACEMENT OF DEFECTIVE ELECTRIC WIRING AND CONNECTED ITEMS ALONG WITH REPLACEMENT OF DBS, REPLACEMENT OF METER BOXES AND FITTINGS FIXTURES, REPAIR/MAINT OF CEILING FAN, EXHAUST FAN, AND OTHER CONNECTED WORK AT AFS MADH UNDER GE AF THANE

Amount

Taking down carefully old copper/aluminium point wiring 1.5/2.5 sqmm and removing from site such as (Light,fan socket or power) Complete including fitting and fixtures,fan regulators switch boards,switches,ceiling rose's lamp holder from existing batten PVC conduit/Concealed conduit / PVC casing caping wiring complete excluding light fittings and fans all as specified and making good to the disturbed surfaces to match all as specified and directed by Engr-in-charge.

Taking down unservceable switches, sockkets, ceiling roses, regulators, Call bell, call bell pushes of any types, modular plate,lamp holders, plug tops from existing switch boards and making good for existing surfaces complete all as specified and directed

Taking down old main Switches,MCCB MCBs of any capacities complete from existing DB's making good for disturbed area complete all as specified and directed

Taking down old unserviceable DB's of any sizes complete all as specified and directed

Taking down old sub main wiring of any sizes complete all as specified and directed

Taking down old unserviceable Metal clad socket, flame proof switches of any type of any sizes making good for disturbed surfaces complete all as specified and directed

Taking down old unserviceable light fittings of any types/ capacities making good for disturbed surfaces complete all as specified and directed

M & L for point wiring with PVC insulated unsheathed 1100 Volts grade single core multistranded Copper conductor cable 1.5 Sqmm drawn PVC through existing concealed condit, fixed on wall/ ceiling etc with necessary fixing accessories and earth continuity conductor cable of size 1.5 Sqmm green colour Connected to common earth dolly including pressed steel terminal boxes concealed in wall Covered with laminated sheet top cover 3mm thick for mounting switches/ sockets/ fan regulators fixed with cadmium plated machine screws all as specified for the following:-

(i) One light / fan point controlled by one way switch

(ii) One socket outlet 5 Amps on independent board

(iii) One socket outlet 5 Amps on the same board

(iv) One bell point controled by one bell push.

M & L for point wiring with PVC insulated unsheathed 1100 Volts grade single core multistranded Copper conductor cable 1.5 Sqmm drawn and including PVC casing capping and accessories, fixed on wall/ ceiling etc with necessary fixing accessories and earth continuity conductor cable of size 1.5 Sqmm green colour Connected to common earth dolly including pressed steel terminal boxes concealed in wall Covered with laminated sheet top cover 3mm thick for mounting switches/ sockets/ fan regulators fixed with cadmium plated machine screws all as specified for the following:-

(i) One light / fan point controlled by one way switch

(ii) One socket outlet 5 Amps on independent board

(iii) One socket outlet 5 Amps on the same board

(iv) One call bellpoint controled by one bell push

M & L for point wiring with PVC insulated unsheathed 1100 Volts grade single core multistranded Copper conductor cable 2.5 Sqmm drawn and including PVC casing capping and all accessories, fixed on wall/ ceiling etc with necessary fixing accessories and earth continuity conductor cable of size 1.5 Sqmm green colour Connected to common earth and earth dolly including pressed steel terminal boxes concealed in wall Covered with laminated sheet top cover 3mm thick for mounting switches/ sockets/ fan regulators fixed with cadmium plated machine screws all as specified for the on independent board.

S&F in repairs Switch piano flush type single pole one way 5 Amp complete all as speicified and directed.

S&F in repairs Ceiling rose surface bakelite two to three terminal complete all as speicified and directed.

S&F in repairs Fan regulator electronic step type 240 V complete all as speicified and directed.

S&F of Bell push flush type 5 Amps complete all as speicified and directed.

S&F of call Bell 230 volts single pole A C complete all as speicified and directed.

S&F in replacement of Switch socket combined two in one 06 pin 5/15 Amps flush type universal complete all as speicified and directed. .

S&F in repairs of Switch Socket multipurpose 5 pin 5 Amps 240 V flush type complete all as speicified and directed.

S&F in repairs of Lamp holder,insulated body with back plate complete all as speicified and directed.

S&F in repairs of 15 Amps plug Top complete all as speicified and directed.

S&F in repairs of 5 Amps plug Top complete all as speicified and directed.

S&F in repairs of Modular Switch 1 way 6A, 1 Modulecomplete all as speicified and directed.

S&F in repairs of Modular Switch 1 way 16A, 1 Module.

S&F in repairs of Modular Bell Push 6A 1 Modle complete all as speicified and directed.

S&F in repairs of Modular Sockets 6A - 2/3 pin Combined 2 module complete all as speicified and directed.

S&F in repairs of Modular Sockets 6A/16A - 2/3 pin Combined 2 module complete all as speicified and directed.

S&F in repairs of Modular Fan Regulator, 120W - 2 module.

S&F in repairs of Modular white cover plate with frame 2 module complete all as speicified and directed.

S&F in repairs of Modular white cover plate with frame 3 module complete all as speicified and directed.

S&F in repairs of Modular white cover plate with frame 4 module complete all as speicified and directed.

S&F in repairs of Modular white cover plate with frame 6 module complete all as speicified and directed.

S&F in repairs of MCB DB SPN 4 Way Double door type 240 Volts complete all as speicified and directed.

S&F in repairs of MCB DB SPN 8 Way Double door type 240 Volts complete all as speicified and directed.

S&F in replacement of MCB DB SPN 12 Way Double door type 240 Volts complete all as speicified and directed.

S&F in repairs of MCB DB TPN 4 Way double door type 415 V with bus bar suitable accommodate ELCB 4 pole complete all as speicified and directed.

S&F in repairs of MCB Isolater Four pole 63 Amps 415 Voltscomplete all as speicified and directed.

S&F in repairs of MCB SP 06 to 32 Amps 240 Volts complete all as speicified and directed.

S&F in repairs of MCB DP 32 Amps 240 Volts complete all as speicified and directed.

S&F in repairs of MCB SPN 40 Amps 240 Volts complete all as speicified and directed.

S&F in repais of MCB SPN 63 Amps 240 Volts complete all as speicified and directed.

S&F in repais of MCCB TPN 4 Pole 16 KA 100 Amps 240 Volts complete all as speicified and directed.

S&F in repairs of single pole and neutral enclouser with a two pin and earth and metal clad plug socket complete with one single pole MCB 25 Amp 240 Volts complete all as specified and directed by Engr-in-Charge.

S&F energy efficient light emmitting fluorescent light fitting 1x 22 watt, four feet , white fittings with LED rod complete with all accessories & Provn of three core cable of copper conductor of size 0.75 sqmm, making necessary electric connetion from ceiling rose to fitting terminal , fixing the fitting on wall including all necessary fixing accessories complete all as directed Make of Havells/CG/Philips Note:- LED lights fittings shall be with anit flikaring effect and elecronic dirver with efficiency 85% with inbuilt protection against over Voltage short circuit and surge/spike protection upto 2000 Volts ensuring longer life.

S&F for energy efficient light emmitting fluorescent light fitting aluminium body 1x10 watt Two feet LED tube light with LED rod complete with all accessories & Provn of three core cable of copper conductor of size 0.75 sqmm, making necessary electric connetion from ceiling rose to fitting terminal , fixing the fitting on wall including all necessary fixing accessories complete all as directed or quivalent equivalent Make of Wipro/Philip/Bajaj/Havells. Note:- LED lights fittings shall be with anit flikaring effect and elecronic dirver with efficiency 85% with inbuilt protection against over Voltage short circuit and surge/spike protection upto 2000 Volts ensuring longer life.

S&F for energy efficent 13.5 Watt LED Bulk Head in engeering plastic housing plastic housing with prismatic diffuser IP 54 Make - LHEXCFP7PN5 W010 of Havells or equivlaent of Wipro/Bajaj/Philips. Note:- LED lights fittings shall be with anit flikaring effect and elecronic dirver with efficiency 85% with inbuilt protection against over Voltage short circuit and surge/spike protection upto 2000 Volts ensuring longer life.

S&F energy efficient LED 25 Watt Street light fitting, Pressure die cast houing with individual LED's with modular secondary optics and IP 65 Protection complete & Provn of three core cable of copper conductor of size 0.75 sqmm, making necessary electric connetion from ceiling rose to fitting terminal, fixing the fitting on wall including all necessary fixing accessories complete all as directed including taking down old unservicable light fitting. Make- Wipro/Philip/Havells. Note:- LED lights fittings shall be with anit flikaring effect and elecronic dirver with efficiency 85% with inbuilt protection against over Voltage short circuit and surge/spike protection upto 2000 Volts ensuring longer life.

M&L for Sub Main wiring with two single core 2.5 Sqmm PVC insulated FR multistranded flexible copper conductor cable 660/1100 volts grade drawn in through rigid flexible PVC conduit/cassing caping with and including PVC insulated 1.5 Sqmm single core multi strand copper conductor as continuous earth wire in green colour connected to common earth dolly all as specified and as directed by Engr-in-Charge. Note:- 1. Two runs of cable and one run of earth wire incl PVC conduit will be measured and paid one unit.

M&L for sub main wiring complete with two run of 4.0 Sqmm PVC insulated and PVC unsheathed 1100 Volt grade with multistranded copper conductor cable with and including drawn through PVC conduit/casing caping with all accessories fixed on Walls/floors/roofs with and including provision of 2.5 sqmm PVC insulated copper wire as earth continuity conductor and connecting to common earth dolly all as specified by Engr-in-Charge. Note:- Two runs of cable and one run of earth wire incl PVC conduit will be measured and paid one unit.

M & L for submain wiring complete with two run of 6 Sqmm PVC insulated FR multistranded flexible copper conductor cable drawn in through PVC conduit/casing caping complete with all accessories including provision of 4.0 sq mm PVC insulated copper wire as earth continuity conductor all as specified and as directed by Engr-in-Charge. Note:- Two runs of cable and one run of earth wire incl PVC conduit will be measured and paid one unit.

S&F in repairs of Switch Flame Proof rotary type with termination box in LM6, 16A, single 250V omplete all as specified and directed.

S&F in repairs of flame prooof switch socket & plug combined in LM6 cable termination box in LM6, 16A 250V, 2P + earth omplete all as specified and directed.

Taking down carefully ceiling fan, exhaust fan, wall Fan, of any make and any sweep and dismantling of blades canopy down rod etc and deposit to E/M store yard for repairs, including replacement of PVC Cable copper conductor, stranded 1100V grade of size 0.5Sqmm x 3 Core and refix replacement of MS Clamp, bush, nuts, bolts and washers etc all as directed by Engr-in-Charge.

M&L for painting of ceiling fan of any sweep with blades ,canopy -02 Nos down rod for any size and type,scraping out of old paint, filling of cavities with filler preparation of body and cleaning of dust etc and painting by spray with first quality synthetic enamel paint and writing of MES number including taking down & refixing complete all as directed by Engr-in-Charge.

M&L for painting of exhaust fan of any size with louvers, scraping out of old paint filling of cavities with filler preparation of body and cleaning of dust etc and painting by spray with first quality synthetic enamel paint over a coat of zinc primer and writing of MES number including Taking Down & Refixing complete all as directed by Engr-in-Charge.

M&L for painting of pedestal fan of any size and type,scraping out of old paint filling of cavities with filler preparation of body and cleaning of dust etc and painting by spray with first quality synthetic enamel paint and writing of MES number including Taking Down & Refixing complete all as directed by Engr-in-Charge.

M&L for opening of body cleaning of slots, rewinding of fan by super enameled copper insulated wire as per existing gauge, varnishing,heating assembling and testing complete all as directed by Engr-in- Charge for the following :-

a) Ceiling fan of 1200 mm sweep

b) Ceiling fan of 1400 mm sweep

c) Exhaust fan of 300 mm sweep

d) Exhaust fan of 450 mm sweep

e) Wall Mounted fan of 400 mm sweep

M & L in repairs of the following parts:-

a) Capacitor up to 2.5 Mfd/3.15 mfd MAKE : KELTRON/APCOS/PARAG

b) Capacitor of 4 mfd MAKE : KELTRON/APCOS/PARAG

c) S & F in repairs down rod of 300 mm long rod suitable for fixing ceiling fan including nut, bolts and rubber insulator reel complete all as specified and directed.

d) S & F in repairs down rod of 600 mm long rod suitable for fixing ceiling fan including nut, bolt and rubber insulator reel complete all as specified and directed.

e) S & F in repairs down rod of 1 Meter long rod suitable for fixing ceiling fan including nut bolt and rubber insulator reel complete all as specified and directed.

f) Ball bearing suitable with bearing No 6201/6202 for ceiling fan etc,. all as specified and directed MAKE : SKF,TATA,NBC

g) Ball bearing for Wall Fan of any size or sweep complete all as specified and directed.MAKE : SKF,TATA,NBC

h) Ball bearing suitable for exhaust fan of 300 mm /450 mm size complete all as specified and directed.MAKE : SKF,TATA,NBC

j) Gun Metal bush suitable for ceiling fan, exhaust fan etc,. complete all as specified and directed.

k) Ceiling Fan Blade suitable for 1200/1400 mm sweep made of Aluminium complete all as specified and directed.Make : Bajaj/Cromton/Orient /Usha

l) Exhaust Fan Blade suitable for 300 mm sweep complete all as specified and directed.Make : Bajaj/Shakti/Cromton or equivalent

m) Exhaust Fan Blade suitable for 450 mm sweep complete all as specified and directed.. Make : Bajaj/Shakti/Cromton or equivalent

n) Wall Fan Blade suitable for 400 mm sweep complete all as specified and directed.Make : Bajaj/Shakti/Cromton or equivalent

o) Ceiling fan canopy made up of M.S.Sheet complete all as specified and directed.

p) Top and Bottom body (Cover) of Ceiling Fan suitable for 1200/1400 mm sweep any make.

q) Exhaust Fan bracket with frame Nut,Bolt,Rubbers etc Complete 300 mm sweep.

r) Exhaust Fan bracket with frame Nut,Bolt,Rubbers etc Complete 450 mm sweep for including nut bolts complete 300 to 450mm sweep.

S&F in repairs of electronic dimmers, 450 watt, 250 volt, flush jtype on the existing phenolic laminated sheet etc as reqd (Switch type) complete all as specified and directed. Make : ANCHOR/KALKI or equivalent

Supply & Fix in repairs of wall fan regulator complete all as specified and directed.

Supply & Fix in repair of Exhaust Fan louvers of size 450 mm sweep as per sample of metal body complete all as specified and directed. Make : Bajaj/Shakti/Cromton

Supply & Fix in repair of Exhaust fan louvers of size 300 mm sweep as per sample of metal body complete all as specified and directed. Make : Bajaj/Shakti/Cromton

Supply and fix in repairs of Anchor fastner for hanging of ceiling Fan and necessary fittings complete all as specified and directed.

Checking of ceiling fan of any sweep ,any type for fixing arrangement including replacement of stainless steel nut ,bolt with double washer & ,quarter pin as per site including oiling for ceiling fan and making record by taking signautre of users/occuptant by the contractor all as directed by Engr-in-Charge.

Dismantling existing defective earthing PCC chamber and RCC cover and providing new PCC chamber in PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) and precast RCC 1:2:4 type B-1 cover, 60mm thick reinforced with 8mm tor steel bars @ 75 mm c/c both ways, with MS 12 mm dia bar lifting handle complete all as specified and directed.

M&L in repairs for Earth continuity conductor or main earthing lead fixed to wall on batten/saddles or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc of size 4 mm GI Wire complete all as specified and directed by Engineer-in-charge.

Taking down old GI strip/Copper Strip of any type and size complete all specified and directed.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten/saddles or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc of size 32x6mm GI Strip complete all as specified and directed by Engineer-in-charge..

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten/saddles or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc of size 25x3 mm Aluminium Strip complete all as specified and directed by Engineer-in-charge..

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten/saddles or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc of size 32 x 6mm copper Strip complete all as specified and directed by Engineer-in-charge..

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten/saddles or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc of size 20 x 3 mm Copper Strip complete all as specified and directed by Engineer-in-charge.

Taking down steel tubing of any grade and size, laid under ground or fixed on wall/floor etc complete all as specified and directed.

M&L for GI tubing, Medium grade, fixed on wall/pole/floor/ceiling of the following sizes complete all as specified and directed:-

(a) 25 mm bore

(b) 20 mm bore

(c) 15mm bore

Supply and fix in repairs Test point terminal block made up of gunmetal or phosphorus bronze 75mmx75mmx25mm drilled and screws including 8mm dia 25mm long hex head screws and connecting to earth strip acomplete all as specified and directed by Engineer-in-charge.

S&F in repairs Bib tap 15mm bore PTMT any colour high pessure screwed for fixed with long body to GI pipe or ferrule complete all as specified and directed

M & L for maintenance free chemical Gel based earthing, Pure Copper type having 50 mm dia 3 mtr long GI pipe(Wall thickness of 3.2 mm) and 7.50 m long Copper strip earthing electrode of size 25 x 3 mm with 60 Kg ENNOV back fill compound , Model No ELE-350-CU of INNOV Infra Solution Ltd including necessary excavation and earth work in any type of soil, perforated watering pipe, funnel with wire mesh, earth lead protection pipe light grade, PCC Chamber 1: 3 :6 type C1 ( for even finish on both the faces ) and RCC cover 1:2:4 type B1, 550 x 550 x 50 mm thick with 8 mm dia TMT bars 150 mm c/c both ways with 2 Nos of handles of 10 mm dia all as required at site including testing on completion and taking down of old earthing all as directed by Engr in-Charge Note : (1) 7.50 RM GI earth strip including GI pipe light grade is deemed to be included in the quoted rates, beyond 7.50 RM shall be measured and paid separately. (2) Earth resistance of earth pit should be less than 1.0 Ohms on testing after completion. If the desired earth resistance is not obtained the earthing will be redone at no extra cost.

M & L for maintenance free chemical Gel based earthing, Pipe in Pipe type having 80 mm dia 3 mtr long GI pipe(Wall thickness of 3.2 mm) and 7.50 m long GI strip earthing electrode of size 25 x 4 mm with 60 Kg ENNOV back fill compound , Model No ELE-380-GIPP of INNOV Infra Solution Ltd including necessary excavation and earth work in any type of soil, perforated watering pipe, funnel with wire mesh, earth lead protection pipe light grade, PCC Chamber 1: 3 :6 type C1 ( for even finish on both the faces ) and RCC cover 1:2:4 type B1, 550 x 550 x 50 mm thick with 8 mm dia TMT bars 150 mm c/c both ways with 2 Nos of handles of 10 mm dia all as required at site including testing on completion and taking down of old earthing all as directed by Engr in-Charge Note : (1) 7.50 RM GI earth strip including GI pipe light grade is deemed to be included in the quoted rates, beyond 7.50 RM shall be measured and paid separately. (2) Earth resistance of earth pit should be less than 1.0 Ohms on testing after completion. If the desired earth resistance is not obtained the earthing will be redone at no extra cost.

M&L for Brazing of copper strip joints for copper strips of any size complete all as specified and as directed by Engineer in Charge at site.

Supply and fix in repairs for the following items to be incorporated in repairs to earthings

(a) Charcoal

(b) Common Salt

(c ) Funnel with wire Mesh

M&L for testing and measuring the earth resistance value of the existing earthings / Down conductor / air terminal after disconnecting the earth continuity conductor from the test point , applying secondary voltage across the terminals, maintaining proper record of the measurement in presence of the users rep, MES rep, submitting the test records, pouring saline water in the earth pit to achieve low earth resistance, observing the same complete all as directed by Engineer-in-charge at site. Note:1. Earthings within the station premises shall be checked for proper functioning subject to a period of atleast once a month or in case of poor earth value intimated by user, whichever earlier. 2. Materials and earth work for renovation of earthing shall be measured and paid separately under respective item of Sch A 3. Rates quoted shall be deemed to include the cost of brazing / fixing of earth strip upto test terminal as required at site.

Supply and fix in repairs Test point Air termination, single pointed, copper rod 12 mm dia and 300 mm long complete all as specified and directed by Engineer-in-charge.

Supply and fix in repairs Test point Air termination, single pointed, Aluminium Rod 12 mm dia and 300 mm long complete all as specified and directed by Engineer-in-charge.

Supply and fix in repairs to following items to be incorporated in repairs to lightening protection system under trench/ground/floor complete all as specified and directed by Engineer-in-charge.

(a) GI pipe 15 mm dia medium grade

(b) GI pipe 40 mm dia light grade for earth lead protection pipe

(c) GI pipe 15 mm dia for light grade earth lead protection pipe

(d) GI Pipe 40 mm dia medium grade 3 Mtr long for support to Air Termination including necessary Stay wire 10 mm dia with one side dead plug drilled with hole of 12 mm dia complete all as specified and directed by Engineer-in- Charge

(e) Porcelain insulator with nut bolt and washer suitable for fixing copper/gi/aluminium strip on wall or ceiling

(f) Epoxy insulator 100 mm dia conical shape

M&L for PCC 1 : 3 : 6 type C1 with 20 mm stone aggregate for foundtation / concrete blocks / earthing chamber / chamber cover set in cement mortar 1:4 complete all as directed by Engineer-In-Charge

Supply and fix sheet steel enclosure for test terminal block of size 150x150 mm made out of 2 mm thick dully Powder Coated CRCA sheet for fixing test terminal block all as directed

Testing of earth resistance of the existing earthing by using earth tester obtaining required test result and submit the report to Engr-in-Charge, all as specified and directed Note : Earth tester required for testing of resistance shall be included in quoted rates.

Excavation in trenches n. exc. 1.5 M in width and 1.5 M in deep for laying of pipes and getting out in Soft / loose soil complete all as specified and directed

Excavation in trenches n. exc. 1.5 M in width and 1.5 M in deep for laying of pipes and getting out in hard /dense soil complete all as specified and directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25 cmcomplete all as specified and directed

Removing excavated material n. exc. 50 M away, depositing as directed at level n. exc. 1.5 M above starting point complete all as specified and directed .

M&L for providing crushed stone sand cushioning to UG cable including punning down of sand in layers complete all as specified and directed

Supply and laying unreinforced precast concrete cable cover factory made embossed the mark “LT CABLE” class LV type1 flat size 250x150x40 mm laid in trenches complete all as specified and directed

Taking down GI pipe laying in trenches for UG cable protection of any sizes pipe complete all as specified and as diercted.

Supply and lay in trenches / along the wall / floor pipes GI light grade of size 80 mm with and including all fittings and accessories complete all as specified and and directed for cable protection complete all as specified and directed

Supply and lay in trenches / along the wall / floor pipes GI light grade of size 40 mm with and including all fittings and accessories for cable protection complete all as specified and directed

Taking down any sizes of of LT UG cable XLPE with aluminum conductor multistranded , PVC insulated and PVC sheeted heavy duty 1100 Volts grade under ground cable complete all as specified and as directed.

Supply and lay cable XLPE Insulated armored, heavy duty electric power cables (heavy duty) 1100 Volts grade cross sectional area with stranded aluminium conductor of size 10 sq mm 4 Core complete all as specified and directed.

Supply and lay of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in armored, heavy duty electric power cables (heavy duty) 1100 Volts grade cross sectional area with stranded aluminium conductor of size 16 sq mm 4 Core complete all as specified and directed.

Supply and lay of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in armored, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 25 sq mm 3.5 Core complete all as specified and directed.

Supply and lay of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in armored, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 35 sq mm 3.5 Core complete all as specified and directed.

Supply and lay of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in armored, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 70 sq mm 3.5 Core complete all as specified and directed.

Taking down any type any breaking capacity MCCB complete all as specified and as directed as Engineer-in-charge.

S&F Cable jointing kit for 1100V (Earthed) grade cable for straight through joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 50 to 95 sqmm complete all as specified and directed

M&L for cutting existing road/hard standing not exc 50x60 cm in wide & depth getting out excavated material for laying GI tube , for passing through LT cable, returning filling & well rammaing watering finish suraface 10 cm from top using PCC 1:1.5:3; including removal of surplus soil complete all as specified and directed

M & L in repairs for Copper Strip of size 20 x3 mm and including taking out unserviceable Copper strip complete all as specified and directed by Engr - in - charge.

Demolation of Cement concrete in ground floor and paving n.exc 15 cm thickness (below or above) ground level including removal all as specified.

Supply and in repairs MCCB DB verticle type made of sheet steel , powder painted with nuetral bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 way Double door , Make: L&T CAT NO-DBVTH004DD/ / LEGRAND CAT NO-607913/ equivalent of ABB

Supply in repair MCCB DB verticle type made of sheet steel , powder painted with nuetral bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 8 way Double door , Make: L&T CAT NO-DBVTH004DD/ / LEGRAND CAT NO-607913/ equivalent of ABB

M&L for PCC (1:1.5:3) type B1 (using 20 mm graded stone aggregate as in sub base to floor 100 mm thick finished even and smooth without using extra cement complete all as specified and directed.

S & F in replacement MCCB 415 volts grade with adjustable short circuit and over load of following rating :- Make: L&T/Havells/Legrand

(a) 63 Amps, 25 KA, 3 Pole

(b) 100 Amps, 25 KA, 3 Pole

(c) 125 Amps, 25 KA, 3Pole

(d) 160 Amps, 36 KA, 3 Pole

(e) 200 Amps, 36KA, 3 Pole

(f) 250 Amps, 36 KA, 3 Pole

(g) 400 Amps, 36 KA, 3 Pole

M&L for MS chequered plates of not less than 6 mm thick of sizes as per site requirement incl cutting , welding of strip on the edges for proper fixing and provn of handles for lifting & fixing arrangement as shown & directed.incl taking out the old & unserviceble chequered plates.including one coat of primer & 2 coats of synthetic enamelled paint of approved colour all as directed.

Material and Labour for repairing of LT Panel of not exc of sizes 2.5 Mtr x 2 Mtr x 0.80 Mtr doors/shuttering to welding and bracing of hinges, tinkering, and replace worn out rusted unserviceable doors/compartment shutters front sides and back side lock system including replace worn out rubber gaskets/feeding of compartment doors/shutters, decorbonising of all cable terminals, Busbars (R,Y,B &N) aluminium/copper cleaning inside of panel housing with help of air belower heavy duty complete all as specified and directed by Engineer-in-Charge.

Material and Labour for repairing of LT Panel of not exc of sizes 2 Mtr x 1.5 Mtr x 0.80 Mtr doors/shuttering to welding and bracing of hinges, tinkering, and replace worn out rusted unserviceable doors/compartment shutters front sides and back side lock system including replace worn out rubber gaskets/feeding of compartment doors/shutters, decorbonising of all cable terminals, Busbars (R,Y,B &N) aluminium/copper cleaning inside of panel housing with help of air belower heavy duty complete all as specified and directed by Engineer-in-Charge

Material and Labour for repairing of feeder pillar box of not exc of sizes 2 Mtr x 1.5 Mtr x 0.80 Mtr doors/shuttering to welding and bracing of hinges, tinkering, and replace worn out rusted unserviceable doors/compartment shutters front sides and back side lock system including replace worn out rubber gaskets/feeding of compartment doors/shutters, decorbonising of all cable terminals, Busbars (R,Y,B &N) aluminium/copper cleaning inside of panel housing with help of air belower heavy duty complete all as specified and directed by Engineer-in-Charge

Supply in repair LED indication lamp for indication of (R,Y,B) 230 Volts including connections and taking out unserviceable indication Lamp complete all as specified and directed

Supply in repair Volt meter 0-500 Volt digital type including connections and taking out unserviceable Volt meter complete all as specified and directed

Supply in repair Ampere meter 0-400 Amps digital type including connections and taking out unserviceable Ampere meter complete all as specified and directed

Supply in repairs of epoxy insulators suitable to fixing of earth conducors including all fixing accessories saddles. screws, Nut and bolts complete all as specified and directed by Engineer-in-Charge

M/s Bhagirathi Electricals

SHREE SHIV ELECTRICAL

NANGIA AND CO