Upgradation of Residential Office at Residential Quarter No.-2 (Occupied by Honble Chief Minister Jharkhand) at Booty Road Dindayal Nagar, Ranchi

Amount

Dismantling tile work in floor and roof laid in cement mortar including stacking material withing 50M lead. For thickness of tiles 10mm to 425mm.

Demolishing pucca brick or lime work including stacking serviceble material in countable stacks within 15M lead and disposal of unserceble material with all leads all complete as per direction of E/I.

Taking down old door and window shutters including stacking serviceable materials withn 15M. Lead and disposal of unserviceable materials with all lead all complete as per direction of E/I.

Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking sown chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge

Supplying chemical emulsion in sealed containers including delivery as Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing and laying in position cement concrete of (P.C.C) with nominal mix of 1:2:4 in Foundation and Plinth do---do-- all Complete job.

Providing designation 75 A brick work in C.M. (1: 3) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture, over the plastersd wall surface to prepare the surface even and smooth complete.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

Providing two coats of plastic emulsion paint of approved shade and make over old surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily Size 1200X1200

Providing and fixing machine cut, mirror/ eggshell polished , Marble slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPV profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately)

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110m bend

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110 mm Shoe

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

32 mm nominal dia Pipes

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 Sq.Mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular type switch, modular plate,suitable GI box etc. as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.

2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire.

4 x 10 sq.mm. + 2 x 10 sq.mm. Earth wire.

Supplying and fixing of suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps. modular switch, connection, painting etc. as required.

Supplying and fixing of following modular switch/ socket outlet on the existing Modular plate & switch including connection but excluding modular plate etc. as required.

3 pin 5/6 amp socket outlet

15/16 amp switch

6 pin 15/16 amp socket outlet

Supplying and fixing following size/ modules, GI box Boxes alongwith modular base & cover plate for modular switches in recess etc as required.

6 Module (78mmX205mmX50mm)

8 /9Module (78mmX230mmX60mm)

12 Module (135mmX205mmX60mm)

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supply and fixing of stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supply and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.

Supply and drawing co-axial TV cable RG-6 grade copper conductor PE insulated,with PVC sheath in the existing surface / recessed PVC conduit as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

Supplying and fixing following way, three pole and neutral, sheet MCB distribution board 415 volts,on surface /recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, Phosphatized and powder painted including earthing etc. as required (But without MCB / RCCB / Isolators).

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supplying and fixing following 240 volts `C' series, miniature circuit breaker (MCB)suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 6 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

1.5Tr. 5 Star split A.C (Inverter Type) I91391-part-I

2.0Tr. 5 Star Split A.C (Inverter Type) IS-1391-part-I

Copper Tube of size 1/4" for aplit ac unit 1/1.5/2/3 Tr capacity including nitride rubber

Copper Tube of size 5/8" for aplit ac unit 1/1.5/2/3 Tr capacity including nitride rubber

drain pipe. For AC

5 KVA wall mounted automatic voltage stablizer from range 140V to 280V

Outdoor stand for 2.0 Tr Split AC

Carriage

A) LOCAL SAND , LEAD - 3KM(P)

B) SAND , LEAD - 8KM(P)

C) STONE CHIPS , LEAD - 22KM(P)

D) BRICKS , LEAD-1k+7p=8KM.

Non-Shedule Items Providing and fixing of 8 mm wooden laminate floor and skarting with 2 mm thick Kini Foam under layer (Make :- Action, Green, Deco foot or Equivalent.)

Providing and fixing in position black out curtain with aluminium extrusion track system over the window opening. Required length of cross over shall be provided to ensure total black out. Curtain wands shall be at required distance from the floor. The cost shall include all related hardware, materials, necessary scaffolding etc. Complete. [Manually Operated]

Supplying and Fixing & Fitting of Kaleen MADE OF SYNTHETIC SHAGGY (6' x 8') All complete as per building specification and direction E/I

Supplying and Fixing & Fitting of Carpet All complete as per building specification and direction E/I

Supplying and Fixing & Fitting of Foot mat All complete as per building specification and direction E/I

Providing and fixing Heat resistance insulation in Ceiling, over 2"x1" aluminium pipe including labour charge. All complete as per building specification and direction E/I

Providing and fixing all height wall panelling of 12 mm thick water proof ply Century Marine ply IS:710, ISI Mark, Termites proof. over 2"x1" aluminium pipe, 6mm thick w.p.c ply 12mm ACCOUSTIC RUBBER PANEL and Fabric all complete including all taxes and royalty all complete as per building specification and direction E/I (Make of Laminate, Plywood and Veneer (710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge)

Providing and fixing all height wall panelling of 12 mm thick water proof Century Marine ply IS:710, ISI Mark, Termites proof. over 2"x1" aluminium pipe, 1.5mm laminated sheet all complete including all taxes and royalty all complete as per building specification and direction E/I (Make of Laminate, Plywood and Veneer (710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge)

Providing and fixing all height wall panelling of 12 mm thick water proof Century Marine ply IS:710, ISI Mark, Termites proof. over 2"x1" aluminium pipe, 6mm PVC louvers all complete including all taxes and royalty all complete as per building specification and direction E/I (Make of Laminate, Plywood and Veneer (710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge)

Providing and fixing all height wall panelling of 12 mm thick water proof Century Marine ply IS:710, ISI Mark, Termites proof) with 6mm w.p.c. board over 2"x1" aluminium pipe, 15.9mm fire resistant Gypsum board. all complete including all taxes and royalty all complete as per building specification and direction E/I (Make of Laminate, Plywood and Veneer (710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge)

Providing and fixing Window/Door FRAME with 12mm b.w.p block board & plywood CONFORMING TO IS:710 GRADE OF APPROVED MAKE & BRAND (green ply, century ply or equivalent and Pasting with 1.5 mm laminate with material and labour all complete as per building specification and direction of E/I. (Make of Laminate, Plywood and Veneer (710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge)

Providing and fixing door shutter wooden framed by both side best quality ply and 1 mm thick water proof laminate both side pasting finishing with all material and labour all complete (including all fancy type fitting) as per building specification and direction of E/I.

Providing and fixing Book rack of 19 mm thick water proof Century Marine ply IS:710, ISI Mark, Termites proof. all material and labour all complete as per building specification and direction E/I. (Make of Laminate, Plywood and Veneer (710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge)

Providing and fixing Ding Dong wireless Call Bell

Providing and fixing Lether Fail Holder

Providing and fixing Pen Stand

Providing and fixing Cunter slab Flower Pot with Artificel Flower

Providing and fixing Brass Metal antique type Silent Sweep Wall Clocks

Providing and fixing Decorated antique type besin top Wall Mirror

Supply and instalation of (Theme Based Painting) with Framing all complete as per specification and direction of E/I.

Providing and fixing 55 INCH LED TV SMAER (QA55S90CAK Samsung) in the direction of E/I.

Providing and fixing 65 INCH LED TV SMAER (QA65S90AUL Samsung) in the direction of E/I.

Providing and fixing ICO-WHT-LETS36R009XN ESTUS SWIVEL36° 9W NEUTRAL WHITE in the direction of E/I.

Providing and fixing STI-WHT-LSTP04X005XW 5W OUTDOR LED STIPLIT WARMIP65(1PACK=5M) in the direction of E/I.

Providing and fixing ZCI-WHT-LDRV01S030XX POWER SUPPLYFOR 5W/PM LED STRIP LIGHT 24V,1A INDOOR in the direction of E/I.

Providing and fixing DCO-GLD-AS11021 COSMOSCHANDELIERWITH ASFOURALMAAZACRYSTAL (D600,H-90MM) in the direction of E/I.

Providing and fixing Remot control Ceiling Fan in the direction of E/I.

Providing and fixing Dolphy Automatic Soap Dispenser-DSDR0117

Providing and fixing Dolphy SS pepar dispenser

Providing and fixing Dolphy Toilet Roll Dispenser-DTPR0015

Providing and fixing Automatic Air Freshner Complete Set

Providing and fixing Dolphy SS Cloth Hook-DTPR0020

Providing and fixing Taski Urinal Screen

Providing and fixing Softcare Enhance Hand wash ( 5 Ltr.)

Providing and fixing 8L Stainless Steel Indoor Trash Can With Foot PedalDWBN0026

Providing and fixing WALL HUNG WC RIMLESS WITH DURAPLAST SEAT COVER AND SLIP IN CONN. TOTO CODE - CW162MUNNW1 + TC390CVK + TYX215C

Providing and fixing TOTO, THX20MCRB HEALTH FAUCET

Providing and fixing TOTO MB174P#SS FLUSH PLATE

Providing and fixing TOTO WH132MNF CISTERN WITHOUT FRAME

Providing and fixing TOTO LW4716RE#XW TABLE TOP BASIN

Providing and fixing KEROVIT 411005 2 WAY BIB TAP

Providing and fixing KEROVIT 111032 STOP COCK TRIM

Providing and fixing KEROVIT 111031 STOP COCK CONC.

Providing and fixing TOTO UW904VM#NW1 URINAL

Providing and fixing TOTO DUE114UPK URINAL SENSOR

Providing and fixing CONNECTION PIPE CONNECTION PIPE

Providing and fixing TOTO THX1A-6N BOTTLE TRAP

Providing and fixing KEROVIT T6JV6 WASTE COUPLING

Providing and fixing HAVELLS TROCLA 15L TANK ( geyser )

Providing and fixing WALL HUNG WC RIMLESS WITH DURAPLAST SEAT COVER AND SLIP IN CONN. TOTO CODE - CW822RMUNNW1 + TC281SJ + TYX215C

Providing and fixing TOTO LW818JW/F#W TABLE TOP BASIN

Providing and fixing TOTO TLG01310B2 WALL MOUNTED BASIN MIXER

Providing and fixing TOTO TLN01301B1 WALL MOUNTED BASIN MIXER CONC.

Providing and fixing KEROVIT 7027 URINAL

Supplying and placing of 3 SEATER Leather Brown - Mocha Brown Sofa frame made of Kiln-dried solid wood ensures durability Solid wood tapered legs make the sofa look airy and light Breathable genuine leather upholstery feels buttery soft and sumptuous Soft cushioned back and seat for comfortable seating Padded armrests adds to your comfort Curved wooden accent and classic tufting add a timeless appeal Anti-sag construction offers the right level of support for maximum comfort Comfortable seat depth & height, designed for modern Indian lifestyle Dimension (W)1930mm X (D)900mm X (H)940mm Seating Capacity 2 Seater Assembly Type Knock Down. The product is BIFMA and FSC certified .Warranty-5 Years MAKE DURIAN.MODEL-RADIANCE/3

Supplying and placing of 2 SEATER Leather Brown - Mocha Brown Sofa frame made of Kiln-dried solid wood ensures durability Solid wood tapered legs make the sofa look airy and light Breathable genuine leather upholstery feels buttery soft and sumptuous Soft cushioned back and seat for comfortable seating Padded armrests adds to your comfort Curved wooden accent and classic tufting add a timeless appeal Anti-sag construction offers the right level of support for maximum comfort Comfortable seat depth & height, designed for modern Indian lifestyle Dimension (W) 1410mm X (D) 900mm X (H) 940mm Seating Capacity 2 Seater Seating Height 460mm Size Grand Assembly Type Knock Down. The product is BIFMA and FSC certified .Warranty-5 Years MAKE DURIAN.MODEL-RADIANCE/2

Supplying and placing of 1 SEATER Leather Brown - Mocha Brown Sofa frame made of Kiln-dried solid wood ensures durability Solid wood tapered legs make the sofa look airy and light Breathable genuine leather upholstery feels buttery soft and sumptuous Soft cushioned back and seat for comfortable seating Padded armrests adds to your comfort Curved wooden accent and classic tufting add a timeless appeal Anti-sag construction offers the right level of support for maximum comfort Comfortable seat depth & height, designed for modern Indian lifestyle Dimension (W)920mm X (D)900mm X (H)940mm Assembly Type Knock Down. The product is BIFMA and FSC certified .Warranty-5 Years MAKE DURIAN.MODEL-RADIANCE/1

Supplying and placing order center table -Dimension (W) 800mm X (D) 800mm X (H) 335mm/abletop made of natural marble. Natural variations in the marble veining make each piece unique. Base made of high-quality metal. The gently curved profile in mixed materials adds dimension to your space. 50mm thick tabletop complements the Champagne Gold hued boxy pedestal. The Antique Chrome finish adds a striking contrast with a white tabletop. MAKE DURIAN - MODEL -DOROTHY/CT

Supplying and placing order center table -Dimension (W) 500mm X (D) 500mm X (H) 500mm/abletop made of natural marble. Natural variations in the marble veining make each piece unique. Base made of high-quality metal. The gently curved profile in mixed materials adds dimension to your space. 50mm thick tabletop complements the Champagne Gold hued boxy pedestal. The Antique Chrome finish adds a striking contrast with a white tabletop. MAKE DURIAN - MODEL -DOROTHY/ST

Supplying and placing of Premium Leatherette Chair, High BacK/Dimension (W)710mm X (D)750mm X (H)1245mm /Colour & Colour Family Brown/ Pneumatic Height Lift Tilt Tension Control Chrome Base/Pneumatic Height Lift,Tilt Tension Control,Revolving Synchro Multilocking The product must be from a Manufacturer having ISO 9001,ISO 14001,,AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKEDURIAN.WARRANTY5YEARS.MODEL NO- LINCOLN/HB

Supplying and placing of Premium Leatherette Chair, High BacK/Dimension (W)700mm X (D)600mm X (H)1050mm/ Colour & Colour Family Brown/ Pneumatic Height Lift Tilt Tension Control Chrome Base/Pneumatic Height Lift,Tilt Tension Control,Revolving Synchro Multilocking The product must be from a Manufacturer having ISO 9001,ISO 14001,, AIOTA ,BIFMACOMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKEDURIAN.WARRANTY5YEARS.MODEL NO- LINCOLN/LB

Supplying and placing of Leather 2 Seater Sofa in L-48 COLOUR Sofa frame made of Kiln-dried solid wood ensures durability Breathable leatherette upholstery keeps your body cooler for longer Solid wood tapered legs make the sofa airy and light Firm seat and cushioned back for comfortable seating Upholstered armrests add to your comfort Piping and stitch details complement the design Anti-sag construction offers the right level of support for maximum comfort Dimension (W)1530mm X (D)710mm X (H)770mm Seating Capacity 2 Seater Assembly Type Knock Down. The product is BIFMA and FSC certified -MAKE DURIAN.MODEL-/1 CLEMENT/2

Supplying and placing of Leather Chair, High Back Material & Subtype Leather CHAIR - Frame Materia/Leather upholstery with high flexing endurance and superior tear strength & colour fastness. Highly durable leather procured from Italian tanneries with high consistency in quality and colour. Stain & fade resistant upholstery that is tested for quality & safety norms. Premium high-density foamed seat and back for comfortable seating. The product is BIFMA and FSC certified -MAKE DURIAN.MODEL-HAMELIN

Supplying and placing of VISITOR CHAIR - Dimension (W)570mm X (D)510mm X (H)775mm/Material & Subtype Solid Wood- Rubber Wood,Premium Leatherette Frame Material Solid Wood/Upholstery Material Premium Leatherette. Legs crafted of solid wood in Natural finish. Kiln-dried solid wood construction makes it warp and scratch-resistant. Breathable leatherette upholstery in grey feels soft and sumptuous. Anti-peel family-friendly upholstery, ideal for families with kids & pets. Contouring barrel back, slender arms and soft seat offer comfortable seating experience. The natural brown finish of the wooden frame adds a striking contrast Assembly Type Knock Down. The product is BIFMA and FSC certified -MAKE DURIAN.MODELMELANIE/DC

Supplying And Placing Of : Director Desk Mjf/61101 Sku Is Mjf/61101/B Premium Suites Director Table Structure Of L-Shaped Desk . Primary Work Surface Over All Size Is 2400Mm(L)X 2330Mm(D)X 770Mm(H) 45Mm Thick Table Top Made Of Prelaminated Particle Board Work Surface With Rich Cherry Finish Same Matching Edge Banding Made Of Same Red Cherry P.U Polish. Modesty Is Designed With Leather Patch.Side Pannel Is Made Of 36Mm Thick . * Provision Of Side Unit Of Size Is 1200Mm(L)X 595Mm(D)X 770Mm(H) ,(Combination Construction On Table Top Wire Management 2 Hole With Ss Grooment & 1 Hole With Pvc Grooment On Top Side Unit. Below Table Top One Keyboard Tray,In Side Unit Below The Top 1 Key Board Tray,1 Open Box File ,1 Drawer + 1 Opeanable Door Shelve.* Fixed Pedestal Of Size 450Mm(L)X 400Mm(D)X 690Mm(H) , Having 3 Equal Drawers In Provided With Cetnral Lock For Security And Handles Are Provided For Easy Of Opening. Overall Construction Of Pedestal Is 18 Mm Along With Fecia Of Drawers. * All The Mdf Borad Are Is-14587-1998 With Confirm To Din 68861.Iso 9001- 2015 Quality Certification Confirming To Astm D 4499 Standards For Viscosity And Thermal Stability . * The Seller / Company Should Be Iso 9001:2008, Iso 9001:2015, Iso 50001:2018, Iso 14001:2015, Ohsas 18001:2007,Greenguard, Green Pro, Aiota, Indian Design Mark Compliant. The Bidder Should Either Offer Products Having Griha Compliance Or The Oem Should Have Fsc Certificate . The Bidder Should Be A Member Of Bifma And At Least Two Products Of The Oem Should Be Certified As Bifma Compliant And An Official Product Official Link/Screenshot Of The Product Listing Must Be Provided From Www.Bifma.Org".Make

Supplying And Placing Of Executive Table Product: Meridian Sku Is Meridian/A Director Desk Director Table Structure Of Curves-Shape Desk .Primary Work Surface Over All Size Is 1800Mm(L)X 900Mm(D)X 760Mm(H) 50Mm Thick Table Top Made Of Prelaminated Particle Board Work Surface With Glossy Walnut Finish Same Matching Edge Banding Made Of Same Matte Finish.Side Pannel Is Made Of 45Mm Thick. *Provision Of Side Runner/A Of Size Is 1400Mm(L)X 400Mm(D)X 660Mm(H), (Construction Is 1 Openable Door + 1 Open Shelve For Cpu Back Side Have 3 Holes ,In Between Both 1 Key Board Tray With Telescopic Channel& 1 Open Box Storage (L) 550Mm X (H) 350Mm From Down 1-Drawer* 2 Drawers Mobile Pedestal Of Size 400Mm(L)X 480Mm(D)X 550Mm(H) , Having 2 Drawers With Castors In Provided With Cetnral Lock For Security And Given Curved Shaped Upper Drawer Are Provided For Easy Of Opening. Overall Construction Of Pedestal Is 18 Mm Along With Fecia Of Drawers.* Three Layer Prelaminated Particles Board(Wood Product) Of Grade Ii Type Iii Of Is 12823/Latest , * The Seller / Company Should Be Iso 9001:2008, Iso 9001:2015, Iso 50001:2018, Iso 14001:2015, Ohsas 18001:2007,Greenguard, Green Pro, Aiota, Indian Design Mark Compliant. The Bidder Should Either Offer Products Having Griha Compliance Or The Oem Should Have Fsc Certificate . The Bidder Should Be A Member Of Bifma And At Least Two Products Of The Oem Should Be Certified As Bifma Compliant And An Official Product Official Link/ Screenshot Of The

Add 18 % GST

Add 1% Labour Cess

K & G ASSOCIATES