8284 REPAIRS TO EXISTING ALL TYPE OF WOODEN FURNITURE AND SCRAPPING / RECANING OF ALL TYPE OF CHAIRS AT BSO YARD UNDER GE SOUTH PUNE

Amount

CHAIR DINING (FD-279)

Material and labour for front legs of chair dining all as per respective drawings made out of 1st class hard wood (teak wood) after removing old/ damaged legs to match with the existing parts duly polished complete all as specified and as directed. Rest all as per drg. Drg No FD-279.

All as per serial item No. 1.01 here-in-before but for rear legs.

All as per serial item No. 1.01 here-in-before but for seat side rail (canning patti).

All as per serial item No. 1.01 here-in-before but for front rail (canning patti).

All as per serial item No. 1.01 here-in-before but for stiffener.

All as per serial item No. 1.01 here-in-before but for back rest.

Removal of old unserviceable cane of seat and M&L for recanning of complete seat with plastic cane of Make : Premium all as per Godrej pattrn as approved.

Material and labour for brackets of 25mm thick made to shape and screwed to top rails and legs made out of 1st class hard wood (Teak wood) duly polished if support required for chair dining complete all as specified and as directed.

CHAIR EASY (FD-229)

Material and labour for rear legs of chair easy all as per respective drawings made out of 1st class hard wood (teak wood) after removing old/ damaged legs to match with the existing parts duly polished complete all as specified and as directed. Rest all as per drg. Drg No. FD-229.

All as per serial item No.2.01 here-in-before but for front legs.

All as per serial item No.2.01 here-in-before but for seat side rail (Cane patti).

All as per serial item No.2.01 here-in-before but for front rail (Cane patti).

All as per serial item No.2.01 here-in-before but for arm rest (Hands).

All as per serial item No.2.01 here-in-before but for back rail (Cane patti).

All as per serial item No.2.01 here-in-before but for stiffener.

Removal of old unserviceable cane of seat and back and M&L for recanning of complete seat and back with plastic cane of Make : Premium all as per Godrej pattern as approved.

Material and labour for brackets of 25mm thick made to shape and screwed to top rails and legs made out of 1st class hard wood (Teak wood) duly polished if support required for chair Easy complete all as specified and as directed.

CHAIR WRITING (FD-250/280)

Material and labour for front leg of chair writing made out of 1st class hard wood (teak wood) to match with the existing parts duly polished after removing old/ damaged legs complete all as specified and as directed. Rest all as per drawing. Drg No FD-250/280.

All as per serial item No.3.01 here-in-before but for rear leg.

All as per serial item No.3.01 here-in-before but for seat side rail (canning patti).

All as per serial item No.3.01 here-in-before but for seat front rail (canning patti).

All as per serial item No.3.01 here-in-before but for back rest.

All as per serial item No.3.01 here-in-before but for stiffener.

All as per serial item No.3.01 here-in-before but for arm rest (hands).

Removal of old unserviceable cane of seat and m&L for recanning of complete seat with plastic cane of Make : Premium all as per drg Godrej patten as approved.

Material and labour for brackets of 25mm thick made to shape and screwed to top rails and legs made out of 1st class hard wood (Teak wood) duly polished if support required for chair writing complete all as specified and as directed.

REPAIR TO TABLE WRITING (FD-249,275)

Taking out old old unserviceable right leg and S&F of new leg made out of 1st class teak wood leg made out of 35x55x720mm in finished state.

All as per item No as per 4.01 above left side leg size 35x55x720mm.

All as per item No as per 4.01 above but top long rail under the top of size 35x55mm.

All as per item No as per 4.01 above but old unserviceable top short rail of size 35x55mm

All as per item No as per 4.01 above but old unserviceable sifffner in between legs and cabinet of size 35x55mm

Taking out old unserviceable drawer and S&F of new drawer made of board 12mm thick plywood commercial ply throught out from all sides and back also with ply wood 6mm thick ext gde commeicial sides under the bottom of drawer

Taking out old old unserviceable back of box which houses the drawer and cabinet and S&F new back made out of ply wood 6mm thick x5 ply ext gde.

Taking out old old unserviceable knob/handle of drawer and front shutter of cabinet and S&F new aluminium anodised knob heavy duty of quality as per sample available

Taking out old old unserviceable side of cabinet of table and S&F new side of cabinet made out of board 18mm thick ext gde commercial quality

Taking out old old unserviceable shutter of cabinet of table and S&F new shutterr made out of board ((ext gde) 18mm thick with plastic laminated sheet 1mm thick ( both side only) with mild steel xhromium plated piano continous hinges through out with MS screw of appropriate size.

Taking out old old unserviceable top and S&F new shutter made out of MDF board (Ext Gde) 18mm thick with plastic laminated sheet 1.5mm thick (both side only) with 4mm thick teak wood edge in alround the top. Shade of new top as approved by Engineer-in-charge.

M&L french polishing of complete table exposed to view except laminated portion all as specified and directed by Engr-in-Charge.

REPAIR TO SIDE BOARD (FD-241)

Taking out old unserviceable top side board and S&F new top made out of board 18mm thick with pre laminated particle board or made out of 18mm thick block board fixed with laminated sheet 1mm thick on one side approz size of top 1220x455mm. Shade of new top as approved by Engineer-in-charge.

Taking out old unserviceable drawer and S&F of new drawer made out of board 18mm thick ext gde plastic laminated sheet 1mm thick on front of drawer on one side only will be provided.

Taking out old u.s back ply of side board and S&F of new back made out of ply wood 6mm thick both side commercial.

Taking out old unserviceable shutter complete set and S&F new shutter made out of board 18mm thick ext gde with plasic laminated sheet 1mm thick on top only or made of prelaminted particle board 18mm thick. on top only. Shutter to be fixed with mild sheet chromium plated continuous piano hinge with screw steel or required size and qty and all as approved.

Taking out old unserviceable shelf cabinet and S&F new shell made out of 18mm thick block board.

Taking out old unserviceable side of side board and S&F new side made out of 18mm thick prelaminated particle board or block board (ex gde)

Taking out old unserviceable knob/handle of shutter/front of drawer and S&F new knob aluminium anodised heavy duty of approved design and size as per sample available in furniture yard.

Taking out old unserviceable long buttom rail of trestle portion and S&F new bottom long rail made out of teak wood

Taking out old unserviceable long bottom rail and fixing only old short rail to be obtained from Srl NO 6(h) above

Taking out old unserviceable bottom plank of side board and S&F new bottom plank made of 18mm thick MDF board (ext gde)

S&F ply wood 4mm thick one side teak veneered (extg gde) on sides of side board, on front of drawer front of shutters to cover the existing unserviceable surface with head less nails as approved.

M&L polishing with spirit polish externally and internllay on all wooden surfaces exposed to direct viwe except laminated portion all as specified and dircted by Engr-in-charge

REPAIR TO BED plywood top with out MNF (FD-246,247)

Removal of unserviceable long rail and S&F new long rail made out of 1st class hard wood teak wood all as per drg.

Removal of unserviceable stiffner under the ply top and S&F new stifiner made out of teak wood all as per drg

Removal of unserviceable head board carefully and S&F new head board made out teak wood frame covered with one side teak veneered ply 4mm thick on both sides of head board, including teak wood beading of size all as per drg

All as per item No 6.03 above but foot borard .

Removal of unserviceable ply wood top and S&F new top of BWR ISI marked ply wood 12mm thick x 5 ply ISI marked both sides commercial all as per drg (Note Ply top shall be 1980 mm longx900mm wide (single piece).

Material and labour for bracket made out of 1st class hard wood teak wood triangular type size of 40mmx 130mm x 180mm after taking down old/ damaged bracket and fixed with sutaible size of screw at meeting place of legs and long rails duly polished complete all as specified and as directed. Drg No FD-246

Polishing of complete bed hard throughout on surface exposed to diret view except of bed .

REPAIR TO TABLE DINING FOR 6 PERS (FD-273,278)

Taking out unserviceable leg and S&F new leg made out of 1st class teak wood all as per specified in drg and as directed by Engr-in-Charge .

Taking out o/s old long rail and S*F new top long rail made out of 1st class teak wood all as per specified in drg and as directed by Engr-in-Charge

Taking out old unserviceable top short rail and S&F new top rail made out of 1st class teak wood all as per specified in drg and as directed by Engr-in-Charge

Taking out old unserviceable top table and S&F new top of table of size 1500x900mm made out of prelaminated particle board exterior grade with both side teak finish and all as per specified in drg and as directed by Engr-in-Charge

Material and labour for polishing for complete table exposed to view except laminated portion all as specified and directed by Engr-in-Charge

REPAIR TO TABLE DINNING FOR 8 PERS (FD-273,278)

Taking out old unserviceable leg and replace with new leg made out of 1st class teak wood all as per specified I drg and as directed by Engr-in-Charge

Taking out old unserviceable long rail and S&F new top long made out of 1st class teak wood all as per specified in drg and directed by Engr-in-Charge

Taking out old unserviceable top short rail and S&F new top short rail made out of 1st class teak wood all as per specified in drg and directed by Engr-in-Charge

Taking out old unserviceable top table and S&F new top of table of size 1800x900mm made out of prelaminted particle board exterior grade with both side teak finish and all as per specified drg and as diected by Engr-in-Charge.

Material and labour for polishing for table exposed to view except laminated portion all as specified and directed by Engr-in-Charge

REPAIR TO TABLE 900X600M 760MM W/O DRAWER (FD-283)

Removal of unserviceable leg and S&F new leg made of teak wood for table . Size all as per drg and as directed by Engr-in-Charge

Removal of unserviceable top long rail and S&F new front top long rail made out of teak wood all as per drg and as direccted by Engr-in-Charge

Removal of unserviceable top short rail and S&F new top short rail made out of teak wood all as per drg and as directed by Engr-in-Charge

Removal of unserviceable top of table and S&F with mild steel screws of suitable new top made out of prelaminated particle board 18mm thick exterior grade with both side teak finish including provion of 18mmx4mm 1st class teak wood moulding and polishing the same complete all as per drg and as directed by Engr-in-Charge. Size of top 900x600mm.

REPAIR TO FOLLOWNG PARTS OF TABLE CENTRE (FD-274,291)

Taking out unserviceable top of table and S&F new top table of size made out of prelaminated particle board exterior grade 18mm with both side teak finish including provn of 4mm thick teak wood edging all aroud to the table top and all as per specified in drg and as directed by Engr-in-Charge

Taking out old unserviceable leg and S&F new leg made out of 1st lass teak wood all as per dpecified in drg and as directed by Engr-in-Charge

All as per item No 10.02 above nut top rail long side

All as per item 10.02 above but top short rail short side

Replacement of unserviceable rubber rings with hard PVC toes as approved. Fixing shall be done as per drg

Cleaning all the exposed wooden /teak faced ply and wood throughly by using abrassive cloth emery and putty as reqd as per drade prectice and applying polish in a glossy finished shade as directed

REPAIR TO FOLLOWING PARTS OF PEG TABLE (FD-384/277/25/23/184)

Replacement of unserviceable legs with 1st class hard wood teak grade of required size as per drg. The fixing and finishing shall lbe done in accordance with standard workmanship and drg

Replacement of unserviceable top rail long side with 1st class hard wood teak grade-1 of reqd size as per drg. The fixing and fininshing shall be done in accordance with standard workmanship and drg.

All as per item No 11.02 above but top rail short side

Replacement of unserviceable rubber rings with hard rubber rings as approved. Fixing shall be done as per drg

All as per item No 11.04 Above but stiffner short side

Taking out unserviceable top of table and S&F new top of size made out of prelaminated particle board exterior grade 18mm with both side teak finish including provn of 6mm thick teak wood edging all aroud to the table top and all as per specified in drg and as directed by Engr-in-Charge

Cleaning all the exposed wooden surface throughly by using abrassive cloth emery and putty as reqd as per trade prectice and applying polish in a glossy finished shade as directed

M/L FOR REPLACEMENT OF UNSERVICEABLE PART OF THE TEAPOY (FD-232,278,382)

Replacement of unserviceable table top with 18mm thick prelaminated particle baord exterior grade 1 type ll confirming to ISI specification of reqd size as per drg including provn of 6mm thick teak wood edging around the table top The fixing and finishing shall be done in accordance with standred workmanship and drg and directed

Replacement of unserviceable legs with 1st class hard wood teak grade -1 of required size as per drg. The fixing and finishing shall lbe done in accordance with standard workmanship and drg

All as per item No 12.01 above top long side

All as per item No 12.01 above but top rail short side

All a per item No 12.01 above but leg stirffner

Replacment of unserviceable rubber rings with hard rubber rings as approved. Fixing shall be done as per drg

Cleaning old/new wooden surfaces throughly by using abrassive cloth emery and putty as reqd finsh as per trade practice and apply good quality polish as aproved in all exposed wooden surfaces upto the glossy finish shade s directed by Engr-in-Charge

REPLACEMENT OF THE FOLLOWING PARTS OF TABLE 900X600 WITH DRAWER (FD-41(M) 23/231/284)

Replacement of unserviceable table top with 18mm thick prelaminated particle baord exterior grade 1 type ll confirming to ISI specification of reqd size as per drg including kprovn of 6mm thick teak wood edging around the table top The fixing and finishing shall be done in accordance with standard workmanship and drg and directed

Replcacment of unserviceable legs with 1st class hard wood teak grade - 1 of required size as per drg. The fixing and finishing shall lbe done in accordance with standard workmanship and drg

All as per item No 13.02 above but top long side

All as per item No 13.02 above but rail short side

All as per item No 13.02 above but stiffner long side

All as per item No 13.02 above but stiffner short side

Replacment of unserviceable drawer with the materials and sizes as specified the drg complete with knob. The fixing and finishing shall lbe done in accordanc with standard workmanship

Replacment of unserviceable rubber rings with hard rubber rings as approed. Fixing shall be done as per drg

Cleaning old/new wooden surfaces throughly by using abrassive cloth emery and putty as reqd as per trade practice and by Engr-in-Charge

M&L FOR REPAIR REPLACEMNENT OF FOLLOWING PARTS OF SOFA SET 5 SEATS/SOFA SET 4 SEATS (FD-258)

Repair/repacement of unserviceable seat ply with 12mm thick ply conforming to ISI specification size as required as per drg

Repair /replacement of unserviceable back rest wooden frame (single with 1st class hard wood teak of required size as required as per drg

Repair / replacement of unserviceable seat and back of sofa 3 seater like cushion foam by providing with new approved materials seat cushion shall be 32 density of make Sleep well / Kurlon 100mm thick size as required as per drg. Back rest cushion foam shall be thick of 32 density Make sleep well / Kurlon. The tapestry used in the cushion shall be of Make Vimal / Bombay dyeing / De D'cor. Make of cushion & tapestry cloth and Stiching fixing and finishing shall be done with accordance with drg and specification

Cleaning old /new wooden surfaces throughly by using abrassive cloth emery and putty as reqd as per trade practive and apply good quality polish as aproved in all exposed wood surfaces upto the glossy finish shade as directed by Engr-inCharge

M&L FOR REPAIR REPLACEMNENT OF FOLLOWIG PARTS OF SOFA SET 5 SEATS/SOFA SET 4 SEATS (FD-373)

Replacement of old unserviceable/ unhygienic cushion of size 560x530mm with 100mm thick 32 density of Make sleep well / Kurlon cushion as approved by Engr-in-charge. The best quality tapestry and marking to be provided to the cushion upto the satisfaction of Engr-in-charge. The tapestry used in the cushion shall be of Make: Vimal / Bombay dyeing / De-D'cor. make of cushion & tapestry cloth and Stiching fixing and finishing shall be done with accordance with drg and specification.

Repair /replacemenr of unserviceable back rest wooden frame single with 1st class hard wood teak of required size as required as per drg .

Cleaning old /new wooden surfaces throughly by using abrassive cloth emery and putty as reqd as per trade practive and apply good quality polish as aproved in all exposed wooed surfaces upto the glossy finish shade as directed by Engr-in-Charge.

REPAIR TO TABLE BED SIDE (FD-276)

Removing old unserviceable Top of Table Bed Side and S&F new Top made of 19mm thick prelaminated particle board of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-276

All as per item No 16.01 here-in-before but for Sides.

All as per item No 16.01 here-in-before but for Shelf.

Removing old unserviceable Back Ply of Table Bed Side and S&F new Back Ply 6 mm thick of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-276

M&L French polish, 2 coats to new parts of table bed side replaced vide above items and 01 coat to remaining old surfaces complete all as specified and directed. Refer drawing No. FD-276

REPAIR TABLE DRESSING LADIES WITH MIRROR (FD-378/251)

Material and labour for mirror of table dressing ladies of size 1220 x 366 x 5mm thick, electro copper plated mirror with back of 6mm thick ply wood commercial, BWR grade duly polished after removing old/ damaged mirror complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378

Material and labour for mirror frame of table dressing ladies of size 25 x 19 mm all around made out of Ist class hard wood (Teak wood) duly polished after removing old/ damaged frame complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378.

Material and labour for wooden member back of dressing mirror (ladies) of size 45 x 40 x 1550mm made out of 1st class hard wood (Teak wood) duly polished after removing old/ damaged back complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378.

Material and labour for top of table dressing ladies size of 380 x 900mm made out of 18mm thick pre-laminated particle board with one side teak finish and other side white, grade-1 with Ist class hard wood (Teak wood) edging 6mm thick duly polished after removing old/ damaged top complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378.

Material and labour for sliding glass shutter mirror of table dressing ladies of size 270 x 300mm x 5mm thick after removing old/ damaged sliding glass shutter complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251&FD-378.

Material and labour for back made out of 12mm thick plywood, commercial, BWR grade size of 380 x 900mm duly polished after removing old/ damaged back complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251&FD-378.

Material and labour for Aluminium channel of size 12 x 22 x 550mm after removing old/ damaged channel complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378

Material and labour for Aluminium channel of size of 12 x 22 x 380mm after removing old/ damaged channel complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378

Material and labour for legs of mirror table dressing ladies of size 45 x 45x 150mm made out of Ist class hard wood (Teak wood) after removing old/ damaged legs duly polished complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378.

Material and labour for side stiffener of table dressing ladies of size 40 x 25 x 380mm made out of 1st class hard wood (Teak wood) after removing old/ damaged stiffener duly polished complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378.

Material and labour for front stiffener of table dressing ladies of size 40 x 25 x 900mm made out of 1st class hard wood (Teak wood) after removing old/ damaged stiffener duly polished complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378.

CHAIR DINING CUSHIONED Drg No FD/MAP II / 04

Supply and fixing in replacement of unserviceable Front leg of Chair Dining MAP using 1st class seasoned hard wood sheesham including dismantling of unsv components/parts complete all as specified and directed and shown on drg as directed

All as per Ser item No. 18.01 here-in-before but Rear leg

All as per Ser item No. 18.01 here-in-before but side rail.

All as per Ser item No. 18.01 here-in-before but back stiffener.

All as per Ser item No. 18.01 here-in-before but stiffener 'H' type.

All as per Ser item No. 18.01 here-in-before but Foam cushion 75 mm thick and 32 density duly covered with tapestry cloth of approved quality.

Material and labour for brackets of 25mm thick made to shape and screwed to top rails and legs made out of 1st class hard wood (Teak wood) duly polished if support required for chair dining complete all as specified and as directed.

Polishing to chair dining cushioned MAP with french polish wooden portion exposed to direct vision except top ply wood after replacement of above components /parts complete all as specified and directed and shown on drawing

REPLACEMENT OF THE FOLLOWING PARTS OF TABLE 900X600 WITH DRAWER (FD-41(M) 23/231/284)

Replacement of unserviceable table top with 18mm thick prelaminated particle baord exterior grade 1 type ll confirming to ISI specification of reqd size as per drg including provn of 6mm thick teak wood edging around the table top The fixing and finishing shall be done in accordance with standard workmanship and drg and directed

Replcacment of old unserviceable legs with 1st class hard wood teak grade - 1 of required size as per drg. The fixing and finishing shall lbe done in accordance with standard workmanship and drg

All as per item No 19.02 above but top long side

All as per item No 19.02 above but rail short side

All as per item No 19.02 above but stiffner long side

All as per item No 19.02 above but stiffner short side

Replacement of unserviceable drawer with the materials and sizes as specified the drg complete with knob. The fixing and finishing shall lbe done in accordance with standard workmanship

Replacment of unserviceable rubber rings with hard rubber rings as approved. Fixing shall be done as per drg

Cleaning old/new wooden surfaces throughly by using abrassive cloth emery and putty as reqd as per trade practice and by Engr-in-Charge

SARGAM ENTERPRISES

Madina Traders

M/s Green Leaf Electricals

Mahesh Traders

M/s Mitesh Agencies

KASTURILAL HARICHAND OHRI AND SONS