Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.5 LAccepted-AOC | L1 | Accepted-AOC LOWEST QUOTED BIDDER | |
| 2 | L2₹18.7 L+₹1.1 L (6.16%)Rejected-Finance | L2 | Rejected-Finance NOT THE LOWEST QUOTED BIDDER | |
| 3 | L3₹18.8 L+₹1.1 L (6.51%)Rejected-Finance | L3 | Rejected-Finance NOT THE LOWEST QUOTED BIDDER | |
| 4 | L4₹19.2 L+₹1.5 L (8.53%)Rejected-Finance | L4 | Rejected-Finance NOT THE LOWEST QUOTED BIDDER |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
19 Feb 2024, 6:00 pmClosed
CWE AF SECUNDERABAD
CWE AF SECUNDERABAD BOWENPALLY POST SECUNDERABAD 500011
REPAIRS TO ROOF / PLUMBING / SANITARY FITTING / RAIN WATER PIPES /REPAIRS TO TOILETS SUNKEN SLABS AND WATER PROOFING TREATMENT AT AFS BEGUMPET UNDER GE(AF) HAKIMPET
2024_MES_638579_1
84733/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF HAKIMPET
AS PER NIT
9 documents required · 9 mandatory
₹500
GE AF HAKIMPET
₹40,000
Yes
1 Mar 2024
22 Jan 2024
21 Feb 2024
22 Jan 2024
19 Feb 2024
5 Feb 2024
22 Jan 2024 - 31 Jan 2024
Amount
Demolition of cement concrete un-reinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Demolition of cement concrete un-reinforced of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises. complete all as specified and as directed.
Taking down cement or cement lime plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.
M & L for rendering 15 mm thick on fair faces of brick work or concrete or stone surfaces in cement mortar 1:6 and rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 10 mm thick plastering in CM 1:3 on fair faces of brick work or concrete surface as in ceiling including finishing the surface even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.
M&L for for preparation of new plastered / undecorated surface of wall and applying three coats of white wash complete all as specified and directed.
M&L for preparing old plastered or unplastered surfaces and applying one finishing coat of white wash on ceiling complete all as specified and as directed.
M&L for preparing old plastered or unplastered wall surfaces and applying two finishing coat of white wash complete all as specified and as directed.
Material and labour rendering 15 mm thick on fair faces of brick work / concrete surfaces in CM 1:3 finished even and smooth without using extra cement and mixing with WPC as per manufacturers instruction complete all as specified and as directed. Note:- WPC will be measured and paid separately.
Supply Only Liquid water proofing compound to incorporate in above item complete all as specified and as directed.
M&L for Applying evenly a priming coat of industrial bitumen 85 / 25 grade at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and as directed
M&L for APP based polymeric membrane minimum weighing 3.0 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surfaces by forced application complete all as specified and as directed.
M&L for plain cement concrete 1:3:6 type C-2 mix using 40 mm graded stone aggregate as in sunken floors etc complete all as specified and as directed.
M &L for 25 mm thick PCC 1:2:4 type B-0 mix using 12.5 mm graded stone aggregate as in floors complete all as specified and as directed.
M & L for 15 mm thick screed bed or bedding layer in CM 1 : 6 for laying of floor tiles etc complete all as specified and as directed.
Material and labour for non skid colour ceramic tiles of 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm of approved 1st quality in floors etc set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles complete all as specified and as directed.
M&L for Rendering 10 mm thick in CM 1:4 for dado / skirting on brick massonry surfaces finished fair and even for receiving tiles in vertical surfaces complete all as specified and as directed.
M &L for Glazed Ceramic tiles coloured, of size 300 mm x 200 mm x 6 to 7 mm thick approved 1st quality as in vertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles complete all as specified and as directed.
Taking up or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down steel tubing and connections 20 mm bore, including cleaning for refixing or removal to store complete all as specified and as directed.
Supplying and laying 16 mm of CPVC pipes SDR11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors etc complete all as specified and as directed.
Supplying and laying 20 mm of CPVC pipes SDR11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors etc complete all as specified and as directed.
Refixing only 15 mm bore old steel water tubing obtained from dismantling with all fittings such as bends, tee, nipples , elbow , reducers, etc., fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Refixing only 20 mm bore old steel water tubing obtained from dismantling with all fittings such as bends, tee, nipples , elbow , reducers, etc., fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
S&F Angle / stop valves 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and as directed.
Supply and fix in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwedshanks and fly- nuts, screwed for iron pipe complete all as specified and as directed.
Supply and fix 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairs complete all as specified and as directed.
Supply and fix 15 mm bore 2 way bib tap brass chromium plated fancy type with wall flange fixed in repairs complete all as specified and as directed.
S&F Towel Rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (Minium weight 190 gms) complete all as specified and as directed.
S&F sheet glass shelf assembly consistingof 5.5 mm thick glass shelf 12 cm wide with chromium plated bracket guar and railing 60 cm long, fixed in repair complete all as specified and as directed.
Supply and fix (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positionn complete all as specified and as directed.
Supply and fix vitreous china ware wash hand basin 550 mm x 400 mm size, white, flat back or angle including removing the existing one complete and refixing with new bracket as in repairs and making good all connections complete all as specified and as directed.
Supply and fix in repairs 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed complete all as specified and as directed.
S & F 32 mm Dia PVC waste pipe with fly nut, coupling for sinks / urinals or wash basins etc complete all as specified and as directed.
S&F in repair 32 mm waste coupling of PTMT (half or full threaded) (Minimum weight 32 mm-45 gms/40 mm-60 gms) complete all as specified and as directed.
S&F in repair 40 mm waste coupling of PTMT (half or full threaded) (Minimum weight 32 mm-45 gms/40 mm-60 gms) complete all as specified and as directed.
S&F in repair 32 mm waste coupling of PTMT (half or full threaded) (Minimum weight 32 mm-45 gms/40 mm-60 gms) suitable for urinals complete all as specified and as directed.
Supply and fix 15 mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs complete all as specified and as directed.
Supply and fix in repairs vitreous china squatting pan orissa pattern size 580 mm x 440 mm white with integral foot rests complet in repairs, including provision of concrete bedding complete all as specified and as directed.
Supply and fix in repairs vitreous china wash down water closet pan (Pedestal type), white including removing the existing one complete and making good all connections as in repairs complete all as specified and as directed.
S & F in repairs white / black plastic seat cover solid confirming to ISI complete all as specified and as directed.
S & F in repairs Vitreous china Urinal, half stall type, white (Excluding flushing cistern, flush pipe and waste pipe), PVC Connection pipe 15mm bore, 450mm long with PTMT nuts, Push tap of 15mm size any colour high pressure of PTMT screwed for iron pipe and fixed (Minimum weight 15mm-47gms/20mm-75gms), Urinal Spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60 gms) complete all as specified and as directed.
Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle / push button 32 mm dia PVC flush pipe including taking down unserviceable cistern complete as in repairs complete all as specified and as directed.
Supply and fix in repairs 15 mm bore LDPE pipe 45 cm long with brass nuts and washers on both ends complete all as specified and as directed.
Description all as per Ser item No 46 above but 60 cm long complete all as specified and as directed.
S&F brass CP shower rose with arms 75 mm size fixed to pipe as in repairs complete all as specified and as directed.
S&F brass CP mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe and fixed in repair complete all as specified and as directed.
S & F 20 mm dia tubular towel rail brass cromium plated, D type,60 cm long between flanges including one pair of brackets as in repairs complete all as specified and as directed.
S&F PVC (SWR) pipes 75 mm dia, single socketed in any length with rubber ring joints fixed to walls including taking out existing unserviceable pipes complete all as specified and as directed.
S&F PVC (SWR) pipes 110 mm dia, single socketed in any length with rubber ring joints fixed to walls including taking out existing unserviceable pipes complete all as specified and as directed.
S & F 75 mm dia PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1 as in repairs complete all as specified and as directed.
S & F PVC (SWR) bends 75 mm bore with oval access door of any radius complete all as specified and as directed.
S & F PVC (SWR) bends 110 mm bore with oval access door of any radius complete all as specified and as directed.
S&F 110 mm PVC (SWR) bends any radius complete all as specified and as directed.
S&F 75 mm PVC (SWR) bends any radius complete all as specified and as directed.
S&F stack clamps for 110 mm dia PVC (SWR) pipes of 50 mm x 5 mm flat iron and 16 mm dia round iron stay bolts and nuts and securing ends of stays to wall and roofs,fixed in repairs complete all as specified and as directed.
S&F stack clamps for 75 mm dia PVC(SWR) pipes of 50 mm x 5mm flat iron and 16mm dia round iron stay bolts and nuts and securing ends of stays to wall and roofs,fixed in repairs complete all as specified and as directed.
Taking down old sink and S&F new stainless steel kitchen sink without draining board made of stainless steel 1mm thick,coupling plug, washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantelever brackets and connecting union to pipe, overall size 495 mm X 420 mm, bowl size 410 mm X 330 mm X160 mm complete all as specified and as directed.
Taking down old sink with draining board and S&F new stainless steel kitchen sink with draining board made of stainless steel 1mm thick,coupling plug , washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm X 460 mm and bowl size 410 mm X 330 mm X1 60 mm complete all as specified and as directed.
M&L for 100 mm thick PCC (1:2:4) type B-2 mix (using 40 mm graded stone aggregate) for water tank of base in round shape finished using extra cement complete all as specified and as directed.
S & F 500 Ltrs capacity Rotational moulded, polythene water storage tanks ( cylindrical shape with vertical top closed) hoisted and fixed in position including taking down old unserviseable water tanks complete all as specified and as directed.
S & F 1000 Ltrs capacity Rotational moulded, polythene water storage tanks ( cylindrical shape with vertical top closed) hoisted and fixed in position including taking down old unserviseable water tanks complete all as specified and as directed.
S& F in repairs of cover of 500 Ltrs capacity Rotational moulded, polythene water storage tanks ( cylindrical shape with vertical top) including clamps complete all as specified and as directed.
S&F in repairs 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) complete all as specified and as directed.
S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe complete all as specified and as directed.
M&L for Cutting of stone massonry wall for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and as directed.
S&F 15 mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in repairs complete all as specified and as directed.
S&F GI tubing 50 mm bore as in Spout of sunken floors including cutting, laying, bedding wherever necessary complete all as specified and directed.
Demolition of cement concrete as in roofs, floors (other than ground floors), etc. (unreinforced) including old tarfelt & cement mortor bedding and plastering etc complete all as specified and as directed.
M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.
M & L for cement concrete 1:2:4 Type B-1 mix (using 20 mm graded stone aggregate) as in roof kerbs, bands etc complete all as specified and as directed.
M & L for 25 mm thick plain cement concrete (1:2:4) type B-0 mix using 12.5 mm graded agg as in levelling / padding course on roof slab for water proofing treatment complete all as specified and as directed.
M & L for rendering 10 mm thick on concrete surface in CM 1:4 and finishing even and smooth without using extra cement with using WPC @ 3% by wt. of cement, complete all as specified and as directed (Note :- WPC will be measured and paid separately)
Supply Only water proofing compound complete all as specified and as directed.
M & L for cleaning the roof surface and applying oil bond bitumen primer @ 0.2 kg / sqm providing and laying 4.0 mm thick APP modified water proofing membrane weight not less than 4.0 kg / sqm reinforced with non woven polyester mat weighing not less than 160 gm/sqm having soften point not less than 140 degree centigrade tensile strength not less than 800 N/sqcm tearing strength 180N with minimum of 10cm side laps and 15cm end laps by application of torch applying a coat of blown grade hot bitumen over the membrane @ 1.2kg/sqm and providing garnish with solar reflective bitumen aluminium paint @ 0.1 kg/sqm over completed area of membrane complete all as specified and as directed by engineer in charge. Note: the quoted rate shall included for cutting grooves in roof parapets, upward facias, etc and inserting of membrane and making good with CM 1:3 wherever required complete all as specified and as directed.
VACON INFRASTRUCTURES
RAJU AND COMPANY
NEWS CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .