CA NO CWE SGNR 94 of 2020-21 SPECIAL REPAIRS TO BUILDING NO P-64 (OLD MARRIED ACCOMMODATION) AT MILITARY STATION FAZILKA (3RD CALL)

Amount

Taking down chowkats or frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats with shutters (without taking off shutters from the frame exceeding 1.50 sqm each but not exceeding 4 sqm) removing to store complete all as specified and directed by Engineer-in-Charge.

S&F PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and designs complete all as specified and directed by Engineer-in-Charge.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium handle 125 mm long complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium barrel tower bolt of extended section and fixed 150 mm long complete all as specified and directed by Engineer-in-Charge.

S&F 100mm long butt hinges Stainless steel hinges pin, anodised and fixed complete all as specified and directed by Engineer-in-Charge.

S & F pressed steel door frames with one or more rebates including necessary fixing lungs hinges lock strike plate etc complete all as specified size of frame 125 x 60mm complete all as specified and directed by Engineer-in-Charge.

S & F pressed steel door frames with one or more rebates including necessary fixing lungs hinges lock strike plate etc complete all as specified size of frame 105 x 60mm complete all as specified and directed by Engineer-in-Charge.

Ditto Ser no-09 as above but size 75x60 mm as in cup board frames complete all as specified and directed by Engineer-in-Charge.

M&L Cement concrete 1:2:4 type B–1 filling of pressed steel frame and hold fast blocks complete all as specified and directed by Engineer-in-Charge.

S & F Flush shutters, 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides as per SSR Part – I complete all as specified and directed by Engineer-in-Charge.

S&F 35mm thick 2nd class hard wood glazed Skelton shutters open rebated and prepare to receive glass gauges etc without sash bars edges of gramng plain chamfered or rounded fluted without and mixed beads for securing gases etc size of chambers as specified in SSR Part I sector 8-20 (a) fitted to chowkat complete all as specified and directed by Engineer-in-Charge.

S & F Flush shutters, 25mm thick, solid core construction, with block board core and plywood face panels on both sides as per SSR Part – I all as specified.

Taking down shutters and refixing of shutter of any description exc 1 sqm and n exc 2 sqm each in the same opening complete all as specified and directed by Engineer-in-Charge.

M & L for Pieces, small let in for making good where hinges, etc. have been removed from chowkhals or frames, joinery, etc. including painting or oiling to match, if required complete all as specified and directed by Engineer-in-Charge.

M & L for Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.. and removing old beads to Store complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium barrel tower bolt 200mm long complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium pressed handles oval type 150mm size complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium sliding door bolt 300 mm long plate type with bright bolt not less than12mm dia complete all as specified and directed by Engineer-in-Charge.

S&F in repair MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.

S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm complete all as specified and directed by Engineer-in-Charge.

M&L Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, fixed in repairs complete all as specified and directed by Engineer-in-Charge.

M&L preparing surface of wood and wood based surface new on any description not other wise described over 10cm with or grith and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

M&L preparation of new steel surface over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old painted wooden surfaces of any description over 10 cm width of girth not otherwise described and applying one coat of synthetic enamel paint all as specified complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old painted steel surfaces of any description over 10 cm width of girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water complete all as specified and directed by Engineer-in-Charge.

M & L for rendering 15mm thik on fair faces of brick work in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M & L for rendering 15mm thik on fair faces of brick work in cement mortar 1:4 finished even & smooth without using extra cement in two layer , one 10 mm and outer 5 mm with water proofing compound all as specified and directed by Engineer-in-Charge.

M&L rendering 10 mm thick in cement mortar 1:4 om fair faces of concrete surfaces of ceiling finishing even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L glazed ceramic tiles 450X 300X 7mm colour tiles on walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the work over 10 mm rendering in CM 1:4.complete all as specified and directed by Engineer-in-Charge.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry to match the work using colour tiles over screed bed on bedding layer of mortar 15mm thick is CM 1:6 complete all as specified and directed by Engineer-in-Charge.

Dismantling of brick wk built in cement mortar complete all as specified and directed by Engineer-in-Charge.

M&L brick work with Sub class B old size burnt brick, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

Dismantling water tanks and removing to store of 500 ltr capacity complete all as specified and directed by Engineer-in-Charge.

S & F rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 500 Litres complete all as specified and directed by Engineer-in-Charge.

All as per item srl No 38 here but for except water tank 500 litres complete all as specified and directed by Engineer-in-Charge.

S&F 20mm Ball PTMT valves, high pressure, with polytheene float and flynut complete, screwed for iron pipe orr brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

Demolation of cement concrete ( Re-inforced) of any description in ground floor and pavings Nexc15 cm thickness (below or above GL) complete all as specified and directed by Engineer-in-Charge.

M&L for reinforcement 10mm and over, cut to length , bent to shape required , including cranking , benching sprirally for hooping for columns , hooking ends and binding witjh and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quantity confirming to IS complete all as specified and directed by Engineer-in-Charge.

Formwork to soffits of suspended slabs such as roof slabs , floor slabs , landing and similar work exceeding 200mm thick complete all as specified and directed by Engineer-in-Charge.

Formwork to edges of concrete flats , treads , breaks in floors, window cills, concrete railings, opending in concrete walls etc exc 10cm but n.exc 10 cm wide complete all as specified and directed by Engineer-in-Charge.

M&L for RCC (nominal mix) 1:2:4 using 20mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landing , balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge.

M&L marble work 18-20 mm thick in single piece ( table rubbed and polished) in steps,Jams, pillars , windowcills,cooking platform and like in cement mortor (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade complete all as specified and directed by Engineer-in-Charge.

M&L marble work 18-20 mm thick in single piece ( table rubbed and polished) in riser of steps,skirrting ,dado and pillars in cement mortor (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade complete all as specified and directed by Engineer-in-Charge.

S&F in repaire PVC low level flushing system 10 Ltr capacity with flush pipe ccomplete all as specified and directed by Engineer-in-Charge.

S&F for Vitreous china squatting pan, Orissa Pattern size 580mm x 440 white with integral foot rest and ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position and embedded lean/lime concrete bedding, complete all as specified and directed by Engineer-in-Charge.

&F grating square 150mm dize of PTMT (minimum weight 100 gms) complete all as specified and directed by Engineer-in-Charge.

S&F PVC waste pipe 32mm dia & 90 cm long complete all as specified and directed by Engineer-in-Charge.

S&F PVC connection both side brass unions internal for size 15mm dia and 450mm long complete all as specified and directed by Engineer-in-Charge.

S&F in repair bib taps cast copper alloy screwed down crutch or buttefly handle screwed both ends for iron pipe brass ferrrule of size 15mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repair stop cock cast copper alloy screwed down, high pressure, with crutch of butterfly handle screwed both ends to iron pipe of size 15mm complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing of 25 to 32 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed by Engineer-in-Charge.

Refixing 20 mm old steel tubing and connections in new or old possition ( wall ceiling floors, etc) complete all as specified and directed by Engineer-in-Charge.

Refixing 25 mm old steel tubing and connections in new or old possition ( wall ceiling floors, etc) complete all as specified and directed by Engineer-in-Charge.

S&F chlorinated PVC(CPVC) pipes 15 mm Nominal dia fixed completed to wall, ceilings or in floors etc including jointing of pipe & fittings with CPVC solventecomplete all as specified and directed by Engineer-in-Charge.

Supply & fixing mild steel tubes of size 20 mm bore (medium grade) galvanised with all fittingsand fixed complete to wallcomplete all as specified and directed by Engineer-in-Charge.

Supply & fixing mild steel tubes of size 25 mm bore (medium grade) galvanised with all fittingsand fixed complete to wall complete all as specified and directed by Engineer-in-Charge.

Demolation of ashlar facings, dressed stone work, stone slabs or tiles from paving and precast concrete blocks and articles complete all as specified and directed by Engineer-in-Charge.

M &L for water proofing treatment to RCC sunken slab (nexc 45 cm depth of sunken) as specified below dir by EIC. (a) applying 15 mm thick plater in cm 1:3, with WPC (b) creating fillet coving of 50x50 mm with polymer modified mortar (c) apply first coat of two component modifeid polymer coating on hor and vert surface (d) prvn of glass fibre mess 2x2 mm immediately on above coating (e)apply second coat of two component modifeid polymer coating after 72 hrs .( plastered , PCC paid sep.) . plan area shall be measured complete all as specified and directed by Engineer-in-Charge.

M & L PCC (1:5:10) using 40mm graded burnt bricks aggregate as in foundation filling & mass concrete or as in shunken floor complete all as specified and directed by Engineer-in-Charge.

Dismantling of CI pips or reinforced concrete pipes 100 mm dia fixed to wall etc complete all as specified and directed by Engineer-in-Charge.

Dismantling of CI pips or reinforced concrete pipes 75 mm dia fixed to wall etc complete all as specified and directed by Engineer-in-Charge.

S&F CPVC pipe heavy duty 100 mm bore, water and vent pipes in any length with our without ears fixing superior quality solvent complete, laid in trenches or in floors completed all as specified and directed by GE/Engineer-In-Charge

S&F CPVC pipe heavy duty 75 mm bore, water and vent pipes in any length with our without ears fixing superior quality solvent complete, laid in trenches or in floors completed all as specified and directed by GE/Engineer-In-Charge.

S&F CPVC pipe heavy duty 100 mm bore, sanitary connection socket to fit WC out let completed all as specified and directed by GE/Engineer-In-Charge

S&F CPVC pipe heavy duty 100 mm bore, water and vent pipes in any length with our without ears fixing superior quality solvent complete, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.

S&F CPVC floor trap heavy duty 100 mm bore with grating including jointing to waste pipe and fixed with superior quality solvent complete all as specified and directed by Engineer-in-Charge.

S & F brass chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed. Make : Prayag.Essco and equivalent complete all as specified and directed by Engineer-in-Charge.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.

S & F Sink mixer with swinging spout (wall mounted model) Chromium plated brass with connection and nuts complete all as specified and directed by Engineer-in-Charge.

S&F Stainless Steel plate rack of size 900mmx775mmx250 made out of 1 mm thick stainless steel of first quality complete complete all as specified and directed by Engineer-in-Charge.

M&L 50mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection, surface finished even smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M & L rendering 15mm thick water proofing plaster in CM 1:3 on slab / roof admixed including and with Dr. Fixit pidilite LW+@ 200 ml per bag of cement complete all as specified and directed by Engineer-in-Charge.

M & L 25mm thick cement concrete flooring type B0 1:2:4 using 12.5 mm graded aggregate on roof slab complete all as specified and directed by Engineer-in-Charge.

Preparation of roof top surfaces, providing and applying UV stable single components smart care damp proof ultra is a fiber reinforcement elastomeric liquid applied water proofing membrane formulated with PU hybrid polymers and reinforcing acrylics fibers and having SRI of 106 on top of concrete roof surface in three coats including self primer at ratio of damp proof and water 3:1 and coverage @ 1 ltr/10sqm with a thickness of 650 micron. Note :- 6 Hrs interval between two coats will be maintain & the work will be carried out through company applicator duly got approved from accepting officer in writing before incorporation and paid only after receiving of the warranty certificate from the company .

Taking down eaves gutters and rain water pipes complete all as specified and directed by Engineer-in-Charge.

S & F PVC (SWR) pipes and single socketed in any length with rubber ring joints fixed to walls 110mm Dia complete all as specified and directed by Engineer-in-Charge.

S & F Waste coupling for 40 mm bore dia. of discharge pipe PTMT (half or full threaded) . Minimum weight 45 gms complete all as specified and directed by Engineer-in-Charge.

S & F PVC (SWR) bends any radius bore of 110 mm complete all as specified and directed by Engineer-in-Charge.

Preparation of newly plastered surface of wall and applying two coats of cement base paint complete all as specified and directed by Engineer-in-Charge.

M & L for complete removal of existing treatment with hand electric grinder and preparation of old decorated (plastered or unplastered) of walls and applying two coats of cement base paint complete all as specified and directed by Engineer-in-Charge.

M & L Preparation of newly plastered surfaces by applying two coats of interior grade wall putty and making it smooth with sand paper by mechanical method i.e. with hand electric grinder and applying two coats of oil bound distemper over one coat of cement primer including all as specified by mechanical method i.e. spray gun complete all as specified and directed by Engineer-in-Charge.

M & L Preparation of Old plastered surfaces by removing old treatment and applying two coats of interior grade wall putty and making it smooth with sand paper by mechanical method i.e. with hand electric grinder then applying two coats of oil bound distemper over one coat of cement primer including all as specified by mechanical method i.e. spray gun complete all as specified and directed by Engineer-in-Charge.

M&L two coat weather proof exterior emulsion two coat over a coat of extorior primer including preparation of surface by removal of existing treatment with hand electric grinder and applying wall putty over plastered or unplastered of concrete surface complete all as complete all as specified and directed by Engineer-in-Charge.

M&L preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.

M&L preparation of old plastered surfaces of ceiling and applying one coats of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.

supply only liquid water proofing compound complete all as specified and directed by Engineer-in-Charge.

M&L for RCC 1:1.5:3 using 20mm graded aggregate as in chajjas including TMT bars welded with existing steel complete all as specified and directed by Engineer-in-Charge.

S & F in repairs for brass chromium plated shower rose 125 mm size with swivel joint including fixing to 15 mm dia steel pipe or union complete all as specified and directed by Engineer-in-Charge.

S&F in repair towel rail 20mm dia, D type 60cm long between flanges brass bran chromium plated. Make -hindware. Esser etc equialant complete all as specified and directed by Engineer-in-Charge.

S&F 25 mm dia drapery curtain road with decoative end knobs complete with brackate and fixed to walls complete all as specified and directed by Engineer-in-Charge.

Excavation in post holes n exc 0.50m and getting out soft / loose soil complete all as specified and directed by Engineer-in-Charge.

S & F of framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed by Engineer-in-Charge.

S & F mild steel screw bolts (machine made) 11 to 15mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed by Engineer-in-Charge.

S & F of 4 mm dia GI wire fitted with nut and bolt complete all as specified and directed by Engineer-in-Charge.

M & L 75mm thick PCC 1:4:8 , type D- 2, using 40mm graded aggregate as in sub base all as specified and as directed by Engineer-in-Charge.

S&F machine pressed precast concrete interlocking paver block with grey cement & no pigment, any shape and size confirming to IS 15658-2006 of 80mm thick M-40 grade including and over 25mm thick sand cushion complete all as specified and directed by Engineer-in-Charge.

M & L PCC 1:2:4, type B-1 , using 20mm graded stone aggregate as in kerbs or mud stops, rounded or chamfered on edges and similar work complete all as specified and directed by Engineer-in-Charge.

Providing and injecting chemical emulsion treatment should be provided within the plinth area of the ground floor of the structural wherever such cracks are noticed by drilling vertically 12 mm hole at the junctions of floor and walls, constructional and expansion joints mentioned these holes using a hand operated pressure pump unit refusal or to a maximum of one ltr per hole. The holes shall be sealed . in general the idea is to change the soil below the floor at the location of crack with toxicants. So that termites in the soil are denied access though such cracks and openings in the floor. Infested woodwork in chowkhets, shelves, joints, purlines, etc in contact with the floor or the wall shall be provided with protective treatment by drilling holes of about 3 mm diameter with a downward slant to the core of the woodwork on the inconspicuous surface of the frame . these holes should be at least 150 mm centre to centre and should cover the entire framework. One of the chemicals given in 4.1 shall be liberally infused in these holes. If the wood is not protected by paint or varnish two coats of the chemicals given in 4.1 shall be given on all the surfaces and services adjoining the masonary and complete all as specified and directed by Engineer-in-Charge.

S & F in repair powder coated aluminum sliding window three track with frame & two glass shutter using 4 mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31 mm nominal dia of wire and width of aperture 1.61 mm using aluminum powder coated section aluminum cleat , PVC track, bearing, handle lock rubber beading complete all as specified and directed by Engineer-in-Charge. Note :- Size of aluminum section shall be under – (i) three track top and vertical – jindal main 2010. Section No 20621 or equivalent. (ii) Three track bottom – Jindal main – 2010 section 20620 or equivalent. (iii) Shutter Vertical Section - Jindal main – 2010 section 20604 or equivalent. (iv) Shutter top and bottom - Jindal main – 2010 section 20604 or equivalent. (v) Shutter vertical middle ( interlock) - Jindal main – 2010 section 20605 or equivalen.

S&F powder coated anodized aluminum frame for doors, windows , ventilators with one of more rebates including joining cleat for fixing complete all as specified and directed by Engineer-in-Charge.

S&F ventilators shutter side hung type without sash, aluminum section powder coat weighing glazed clips, rubber packing anodized aluminum fittings such as peg stays 150 mm long (1 nos) hinges type B-21 100 mm long (2 Nos) suitable handle (1 Nos) complete all as specified and directed by Engineer-in-Charge.

S&F aluminum anodized grill diamond shape 100mm x 100mm aperture of 6 mm dia round bars including necessary joining cleats, clips anodised complete all as specified.

S & F unions 15 mm brass to connect iron to polyethylene and fixed complete all as specified and directed.

Taking down carefully existing aluminium/Copper point wiring light, fan socket or power bell complete with fitting such as sockets, ceiling roses, pendants batten holders regulators socket, call bells & making good to the disturbed surfaces of walls, matching the colour with existing Surface complete all as specified and directed by Engineer-in-Charge. Note: Rate for making good shall be deemed to be included in above item rate.

Taking down unserviceable main switches and MCB distribution boards single phase complete all as specified and directed by Engineer-in-Charge.

M&L Point wiring complete with 1100 volts grade FRLS insulated unsheathed cable of copper conductor cable multi stranded of size 1.5 Sqmm single core including PVC rigid concealed conduit medium grade of suitable size (not less than 20mm dia) with all accessories such as bend reducers /MS hooks, MS junction boxes 2mm thick galvanized steel pressed sunken terminal boxes of suitable sizes for mounting of switches sockets, fan regulators etc covered with 2.8mm thick plastic laminate (Hylem/Anchor) top cover including continuous earth wire of size 1.5 Sqmm PVC strandedcopper conductor unsheathed, insulated stranded (Green colour) connected to common earth point dolly complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 113 here-in-before but one three pin Piano type socket outlet 5 Amps on the independent board complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 113 here-in-before but one three pin piano type socket outlet 5 Amps on the board complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring complete with 2.5 Sqmm (Nominal area) PVC insulated multistranded fire retardant low smoke unsheated and stranded copper conductor cable ISI marked in and including PVC concealed conduit medium quality and conduit fitting for 3 pin 15 amp multicore switch socket combination including PVC insulated 2.5 Sqmm single core copper earth wire to common earth and connected to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover complete all as specified and directed by Engineer-in-Charge.

S&F switch piano type single pole one way 6 Amp,230 VAC supplycomplete all as specified and directed by Engineer-in-Charge.

S&F piano type socket two in one ,3 Pin 5 Amps 230 VAC supplycomplete all as specified and directed by Engineer-in-Charge.

S&F switch piano type single pole one way 15 Amp on laminated sheet top cover complete to all as spd (Sheet top cover incl in point wiring) complete all as specified and directed by Engineer-in-Charge.

S&F piano type socket Pinao type 6 Pin 16 amp,230 VAC complete all as specified and directed by Engineer-in-Charge.

Supply & fixing PVC Lamp holder suitable for and including batten fittings provided with LED Electric Bulb of 9 W with backalite 20mm back plate ccomplete all as specified and directed by Engineer-in-Charge.

M&L for Ceiling Rose, surface bakelite 12 to 3 terminal, 240 volts, 5 Amp ISI marked complete all as specified and directed by Engineer-in-Charge.

S&F Electric bell ding dong complete all as specified and directed by Engineer-in-Charge.

S&F bell push flush type 5 Ampcomplete all as specified and directed by Engineer-in-Charge.

S&F of fan regulator step down electronic type heavy duly flush type 230 volts AC single phase fixed on laminated sheet top cover (laminated top cover is included in point wiring) and connecting up complete all as specified and directed. (Laminated sheet top cover and sunken box is included in point wiring) complete all as specified and directed by Engineer-in-Charge.

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 corecomplete all as specified and directed by Engineer-in-Charge.

Excavation in trenches , n exc 1.5 m wide and n, exc 1.5 m in depth for foundation, etc. or for shafts, wells cesspits, manholes, peir holes. Etc 1.5 m n exc 10 sqm on plan and n exc, 1.5 m in depth and getting out complete all as specified and directed by Engineer-in-Charge.

Returning, filling including spreading, leveling, watering and well ramming in layers not exc 25cm in soft/soil complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil not exc 50m depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L Sand cushioning for UG cable protection/ducts, consolidated sand compacted with clean dry sand complete all as specified and directed by Engineer-in-Charge.

S & F of MCB suitable for 240 volts AC supply, SPNwith over load and short circuit protection and rupturing capacity not less than 10 KA and 40 Amps complete all as specified and directed by Engineer-in-Charge.

S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 8 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB's and isolatorscomplete all as specified and directed by Engineer-in-Charge.

S & F of MCB suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA and 40 Amps complete all as specified and directed by Engineer-in-Charge.

S & F of MCB suitable for 415 volts AC supply, TPN with over load and short circuit protection and rupturing capacity not less than 10 KA and 63 Amps complete all as specified and directed by Engineer-in-Charge.

M&L sub main wiring of PVC FRLS insulated unsheathed two core 6 sqmm copper multi stranded conductor including one run of single core copper conductor of size 6.0 sqmm as earth wire drawing in concealed PVC conduit complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing MCCB 4 pole 100 A , 415 V, 50Hz having breaking capacity 16KA with all fitting accessories complete all as specified and directed by Engineer-in-Charge.

M & L for LED 10W bulkhead fitting with IP-65 engineering plastic housing with clear, single phase 240C, including 1.0 sqmm copper flexible cable twiested three core alongwith flexible PVC conduilt from ceiling rose to fitting testing complete Cat part No. BLRB 18W CW complete all as specified and directed by Engineer-in-Charge. Note : Warranty and test certificate of LED light fittings to be produced before incoporating.

Supply and fixing of electric storage type water heater staninless steel tank of capacity 25 Ltrs ISI marked verticle including temperature control system completed with all fittings and accessories,ferroglass technology,incoloy glass coated heating element CFC free high density PUF insulation preventing heat loss,minimum 5 star rating complete all as specified and directed by Engineer-in-Charge.

S&F of Ceiling fan of 1200mm sweep mounted in suitable arrangement for operation on 230 volts, single phase, 50 cycle per second, AC supply with electonic type regulator and connecting accessories BEE 5 Star rating and connecting up including three core PVC insulated PVC sheated copper conductor flexible cable from ceiling rose to fan fixing in ceiling complete and making the surface good after fixing the fan complete all as specified and directed by Engineer-in-Charge.

S&F of air freshner pvc exhaust fan of 250-300mm sweep mounted in suitable opening arrangement with louvers suitable for operation on 230 volts, single phase, 50 cycle per second, AC supply and connecting up including three core PVC insulated PVC sheated copper conductor flexible cable 24/0.2mm drawn in flexible PVC conduit fixing in wall and making suitable hole for air freshner fan with necessary finishing of the surface good after fixing the fan complete all as specified and directed by Engineer-in-Charge.

S&F and testing LED light fitting 1x18watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through h oles. The system wattage of fitting should not be more than 18 watt= 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 1700 lumens, total input voltage range 140-280V AC, colour rendering index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin complete all as specified and directed by Engineer-in-Charge.

Earthing complete with galvanised steel earth platge electroe 60 cmx60cm6mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal round level) with edge of the plae not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and GI washers earth plate shall be surrounded by alternate layer of charcoal or coke and common salt 15cm thick all around bottom and top of earth plate as shown in electrical piate No. 3 of SSR Part-I and connecting to earthing test point and testing on completion including PCC 1:3:6 type C2 for earthing pit, GI light grade protection pipe of size 15mm dia, watering pipe 20mm bore medium grade, CI cover and frame necessary earth works and PCC work etc complete all as specified. Earth plate shall be surrounded by alternate layer of charcoal of coke and common salt 15cm thick alround the earth plate including bottom and top. (Note: PCC chamber shall be constructed at least 1.5mtr away from the earth electrod and pipe for watering shall be slanting manner) complete all as specified and directed by Engineer-in-Charge. ---------------------------------------------------------------------------------------------- Note : A sum of Rs. 87,051.00 will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 32 & 33 (Schedule of Credit) of Tender document

RUCHIKA CONSTRUCTIONS

N.R.Builders