REPAIR/MAINT OF DRAIN, PATH, CULVERT IN ZONE - 10 AND 17 AT TALBEHAT MIL STN

Amount

Taking down cement or lime plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for Rendering 15mm in CM 1:4 on fair faces of brick work finished even and smooth without using extra cement complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. Note: All debris obtained from demolition shall be removed 1.5km to 2km complete all as specified and as directed.

M&L PCC (1:3:6) type C-2 (using 20mm graded stone aggregate) 100mm thick as in sub bases/ floors all as specified and directed.

Machine pressed precast concrete interlocking paver block with grey cement pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade of approved quality, laid over and include 50mm thick sand cushion vibrated with mechanical vibrator complete all as specified and as directed.

Machine pressed precast concrete interlocking paver block with grey cement pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M- 40 Grade of approved quality, laid over and include 50mm thick sand cushion vibrated with mechanical vibrator complete all as specified and as directed.

M&L for Chequered cement concrete tiles 20cm x 20cm / 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L PCC (1:3:6) type C-2 using 20mm graded stone aggregate 75mm thick as in plinth protection finished fair even laid in alternate bays n.exc 2m in length all as specified and directed.

M&L for 300 mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars and laid in trenches complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, fillings, mass concreting complete all as specified and directed.

Demolition of brick work or stone / boulder masonary,built in cement mortar incl all quoins , pillars etc. complete all as specified and directed.

M&L for brick work with old size sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in band,beam,benching of drain, man hole,coping,slightly rounded or chamfered angles and throating, and similar work including necessary form work all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto

M&L PCC (1:2:4) type B-2 (using 20mm graded stone aggregate) 100mm thick as in Path/floors all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. Note: All debris obtained from demolition shall be removed 1.5km to 2km complete all as specified and as directed.

Providing precast cement concrete type B1 1:2:4 20 mm graded aggregate as in cover slabs for septic tank/ manholes/drains set in cement Mortar 1:4 complete all as specified and as directed.

M&L TMT bars 10 mm dia and over cut to length bend to shape required incl. cranking hooking ends and binding with and incl. MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed concrete,brick,masonry work complete all as specified and directed.

Excavating in post holes in soft/loose soil each n. exc. 0.5 cum getting out , returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, watering & removing surplus soil to a distance N.exc 50 m and making good surface .

Dismantling of Barbed wire fencing or any type and size

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed by Engineer-in-Charge.

S&F Welded steel wire fabric of size 25mmx25mm weight n.exc 4kg/sqm fixed to MS frame work complete all as specified and as directed.

S&F Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for Chain link fencing confirming to Fe 410-w (Gde E-250) complete.

Supply & fixing chain link fencing of galvanised steel wire 3.15 mm dia confirming to as per IS-2721-1979.wiremesh of size 100 x100 mm.(weight exc 2.5kg/sqm) incl line wires, any mesh, and any type of standards, rails, straining bolts, etc. incl provision of binding wire complete all as specified and directed by Engr- In - Charge.

S&F 10mm dia of shank Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n. exc. 10cm long complete all as specified and directed.

M & L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer all as specified

M & L for preparation of new steel surfaces of any description not otherwise described n.exc10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer all as specified

S&F 1.5 mm thick stainless steel grating 200mm width and length 1 m or exceeding 1 m for fitted to drain in CM 1:2 complete all as specified and directed. (Note:- Grade of stainless steel & design of grating will be approved by Engr-in-charge.)

Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)