8122/E8 WELCOME MAINTENANCE TO BLDGS AND REPAIR/ REPLACEMENT OF JOINERY, PLUMBING, SANITARY FITTINGS AND CONNECTED WORKS INSIDE AND OUTSIDE OTA CHENNAI UNDER GE STM

Amount

M&L for preparing plastered or unplastered old decorated surfaces of wall by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified & directed.

All as per item No.1 above but on ceiling surfaces.

M&L for preparing plastered or unplastered old surfaces of wall by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including crack filling and undulation filling with wall putty to achieve smooth finish and applying one coat of distempering with oil bound distemper white or tinted complete all as specified & directed.

M&L for preparing plastered or unplastered old decorated ceiling surfaces and applying one coat of distempering with oil bound distemper white or tinted complete all as specified & directed.

Complete removal of existing treatment on walls and applying two coats of oil bound distemper over a coat of primer with 3mm thick wall putty to achieve smooth finish all as specified and as directed.

M&L for preparing of plastered or unplastered old surfaces of wall and applying one coat of exterior weather proof paint white or tinted upto triple storey building including scaffolding arrangement complete all as specified and directed.

Complete removal of existing treatment and preparation of plastered or unplastered surfaces of walls, soffits of chajja, cornices etc and applying two coats of exterior weather proof paint over a coat primer white or tinted upto triple storey building including scaffolding arrangement complete all as specified and directed.

M&L for preparing of old painted wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water etc.

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even & smooth w/o using extra cement on internal surfaces of wall all as specified & directed.

M&L for 15mm thick rendering in two layers of 10mm thick and 5mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even & smooth w/o using extra cement, mixed with liquid water proofing admixture including scaffolding arrangement complete (as per manufactures instructions) all as specified. Note : Liquid water proofing admixture shall be measured and paid separately.

M&L for rendering 5mm thick in CM 1:3 on fair faces of concrete surfaces over setting coat 5mm thick in CM 1:2 as in chajja/ceiling surfaces and finished even and smooth with out using extra cement including scaffolding arrangement complete all as specified and as directed.

Supply only liquid waterproofing admixture.

M&L for Preparing of new plastered surfaces of ceiling and applying three coats white wash all as specified and directed.

M&L for Preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of primer with 3mm thick wall putty on internal surfaces of walls.

M&L for Preparation of new plastered surfaces and applying two coats of exterior weather proof paint over a coat primer white or tinted upto triple storey building including scaffolding arrangement on external surfaces of wall complete all as specified and directed.

M&L for Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint upto triple storey building including scaffolding arrangement on external surfaces of walls.

Taking down chowkats or frames with shutters (without taking off shutters from frames) exc. 1.5 Sqm but n. exc 4 Sqm each including making good disturbed surfaces and removing to store.

Taking down chowkats or frames with shutters (without taking off shutters from frames) n. exc. 1.5 Sqm each including making good disturbed surfaces and removing to store.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp restive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per directions at site. Note: (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction. Note: stainless steel butt hinges and necessary S S screws shall be paid separately

S&F 100mm size of mild steel butt hinges, medium weight, cold rolled .

S&F 75mm size of mild steel butt hinges, medium weight, cold rolled .

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm size.

S&F Aluminium anodised barrel tower bolts of extruded section 125 mm size.

S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm long.

S&F Extruded aluminium alloy handles, fabricated type, anodised 125 mm long.

S&F Aluminium alloy, anodised, sliding door bolt of size 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy completed all as specified & directed.

S&F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple on any type of door/windows.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete. Make :Parry ware Cat No .T9937A1 or equivalent.

S&F in repairs 25mm dia aluminium coloured powder coated decorative fancy type curtain rods all as specified and as directed.

S&F aluminium coloured powder coated decorative fancy type end bracket and knob for 25mm curtain rods all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for glazed ceramic coloured joint free tiles in vertical surfaces 350 x 250 x 7mm/450x350x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement, incl cement screed 10 mm thick in CM 1:3 all as specified and directed.

M&L for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over 15 mm thick as screed bed in CM 1:4 complete all as directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sqm each and removing to store.

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as directed

S&F Anodised Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified.

S&F Anodised aluminium window and ventilator shutters, fixed t/ louvered type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F Second class hardwood 35mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc., with sash bars, divided into squares edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and supplied and fitted to chowkats.

M&L for preparing surfaces of new wood or wood based surfaces any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

M&L for brass mortice lock, vertical type, 2 lever of size 100 mm fixed in repairs.

Hacking out old broken glass (any thickness, size, quality or description) from any type of frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S&F Sheet glass, ordinary quality, 4 mm thickness and glazing with oil putty or wooden beading in square n. exc. 0.5 Sqm each .

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F in repairs 15mm bore steel tubes medium grade galvanised with all fittings / fixtures concealed to walls and ceilings or laid in floors.

S&F in repairs 20mm bore steel tubes medium grade galvanised with all fittings / fixtures concealed to walls and ceilings or laid in floors.

S&F in repairs 25mm bore steel tubes medium grade galvanised with all fittings / fixtures concealed to walls and ceilings or laid in floors.

S&F in repairs vitreous china wash hand basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets or erecting of fixing of supply and waste pipe all as specified.

S&F Brass chromium plated 32 mm bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) with plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device all as directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern low level, 10 litre capacity with it’s complete accessories, fixed complete incl connection to water pipe and PVC 32 mm dia flush pipe etc.

S&F 3 in 1 wall mixer with provision of both hand shower and over head shower fixed in repairs. Make : Jaquar (Continental) Cat No : CON-281 KN or equivalent.

Supply and fix Angle valves, cast copper alloy, screwed down, high pressure and fly nuts, screwed for iron pipe 15 mm bore and fixed in repairs all as specified.

S&F in repairs Stop cock (concealed type) cast copper alloy , Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, 15 mm bore.

S&F in repairs 15mm Bib taps, chromium plated fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F Brass chromium plated wash basin Mixer fixed in repairs. Make : Jaquar (Continental) Cat No CON-169KNB or equivalent.

S&F in repairs PVC connection 15mm dia with PTMT nuts of length 450mm.

S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device.

S&F Corner glass Shelves (with brackets) for bath room fixed in repairs. Make : Jaquar (Cat No-CAN-1173 or equivalent) .

M&L for 18/19 mm Pre laminated particle boards, interior grade, Pre laminated decorative choice one side & other side balancing white lamination fixed in repairs with screws to timber work for Cup Boards complete.

M&L for 6mm thick external teak wood lipping fixed to18/19mm thick particle boards with nails.

S&F continuous (piano) hinge mild steel, bright finish or electro galvanised width of flaps 40mm (when open) all as directed.

S&F 75 mm size extruded aluminium alloy handles, fabricated type, anodised.

S&F Aluminium anodised Hasp and staple, safety type of size 75mm.

S&F in repairs Chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges .

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors/wall fixed in repairs all as directed.

S&F PVC (SWR) bend 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) 75 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall fixed in repairs all as directed.

S&F PVC (SWR) bends 75 mm bore complete all as specified and as directed.

S&F PVC (SWR) floor trap plain 75 mm dia outlet with grating including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110 mm.

Demolition of unreinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and disposed off from site all as directed.

M&L for 75mm thick PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base.

M&L for chequered Cement concrete tiles of size 30 cmx30cmx 25 mm thick set, jointed and pointed neat cement slurry in floor with grey cement and pigments, incl 20 mm thick screed bed in CM (1: 4) all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6, type C1 using 40mm graded stone aggregate as in plinth protection & paving, finished even & fair without using extra cement.

Dismantling water tanks of exc 250 n.exc 500 ltr capacity and removing to store

Dismantling water tanks of exc 500 n.exc 1000 ltr capacity and removing to store

S&F Rotational moulded triple layer polyethylene water storage tanks (cylindrical vertical with closed top) 500 ltrs capacity of white colour hoisted and fixed in position including all necessary fittings & fixtures all as specified in SSR Part I and as directed.

S&F Rotational moulded triple layer polyethylene water storage tanks (cylindrical vertical with closed top) 1000 ltrs capacity of white colour hoisted and fixed in position including all necessary fittings & fixtures all as specified in SSR Part I and as directed.

S&F in repairs 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms)

S&F in repairs 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe

G.JANAKIRAMAN CO (BID ID -3066874)

SRI VISHAKHA ENTERPRISES (BID ID -3077370)