Repair, renovation and furnishing of Suite 1, 2 and 3 and Office Room including furniture installation along with connected sewerage system at Erectors Hostel of UIHEP, Mukhiguda.

Removing old lime or cement plaster from walls/cealing including raking out joints 12mm deep and removing the debris within 50 m lead. Complete as per direction of EIC.

12mm thick cement plaster (1:4) over brick work including all cost of materials Dr. Fixit 301 pidicrete URP (SBR latex based) liquid @ 200 Ml /50Kg of cement etc. complete. As per direction of EIC.

12mm thick CP (1:3) for ceiling per Sqm including all cost of materials etc. complete. As per direction of EIC.

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets galvanized with zinc coated of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm centre to centre , one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts& bolts of rqured size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9mm running at the spacing of 1200 c/c to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapped flanges of 26mm each having lips of 10.5mm, at 450mm C/C shall be fixed in a direction perpendicular to GI intermediate channel with connecting clips made out of 2.64 mm dia x230mm long GI wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall screws @230mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm C/C including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per specifications, drawing and as per directions of the Engineer-in-Charge. but excluding the cost of painting with 12.5mm thick tapered edge gypsum plain board conforming to IS:2095-(Part-I) :2011 (Board with BIS certification marks)

Painting one coat with approved paint on old iron work including all cost of materials etc. complete. As per direction of EIC.

Supplying, fitting and fixing vitrified tile (make Kajaria / Somany / Johnson) in floors and dado skirting of size 600mm x 600mm approved make conferming to IS:13755 laid on 20mm thick cement mortar (1:4) (1 cement:4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-charge (for new work only).

Scraping old painting from wall / ceiling with scrapers, sand papering and washing with soap water or soda upto 5M height Complete as per direction of EIC..

Finishing wall surface to walls and ceiling with Acrylic wall putty (water based) making smooth to receive the painting including cost of scaffolding staging charges with cost of all materials,Labour charges,T&P etc,complete as per direction of EIC.

Priming one coat with any approved primer on plastered surface etc. complete. As per direction of EIC.

Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including all cost of materials etc. complete. As per direction of EIC.