Construction Of compound Wall and Improvement of GDA Garden at W No 01 Taj Nagar Kalaburagi City (Kalaburagi North). Under KKRDB Macro for the year 2024-25 (KLB2412113593)(work reserved for Cat-1)

Construction Of compound Wall and Improvement of GDA Garden at W No 01 Taj Nagar Kalaburagi City (Kalaburagi North). Under KKRDB Macro for the year 2024-25 (KLB2412113593)

Earth work in surface excavation by mechanical means for lowering & leveling

the ground for all works other than foundation in all kinds of soils & upto depth

not exceeding 300mm as per drawing and te...

Preparation and surface treatment of formation by removing mud

and slurry, watering to the extent needed to maintain the desired

moisture content, trimming to the required line, grade, profile

Construction of Embankment by excavating the available approved Gravel/

Murrum deposited at a place or borrow pits during or prior excavation with all

lifts and lead, transportation to site, spreading...

Removing & Resetting existing Heavy Duty Cobble/Interlocking

stones/Pavers of thickness 60/75/80/100mm using Cement

and 40mm thick sand bed ( average thickness ) and compacting

with plate vibrator to ...

Construction of Granular Sub-Base of required grading as per

design spreading in uniform layers with motor grader on

prepared surface mixing by mix in place method with front end

loader at OMC and com...

Providing, laying, spreading and compacting graded stone

aggregate to wet mix macadam specification including premixing

the Material with water at OMC in mechanical mix plant carriage

of mixed Materia...

Providing and laying 60mm thick factory made precast M -30

grade Cement Concrete Paver Block as per IRC SP 63:2018 &

IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved

shape and colour, laid...

Removing and resetting of precast kerb stones fixed with CM

1:3 fixed and finished in line as per direction of Engineer in

charge. (The cost of PCC shall be paid extra)

Construction of cement concrete kerb with top and bottom

width 115 and 165 mm respectively, 250 mm high in M 15

grade foundation 150 mm thick, foundation having 50 mm

projection beyond kerb stone, ker...

Providing and laying in position Cement Concrete for all Sub structures of

building, Irrigation works, Sub structure works of bridges, Drain works &

other parallel works from 0.50m to 3.50 m height. T...

Demolishing stone rubble masonry manually/ by mechanical means

including stacking of serviceable material and disposal of unserviceable

material to the appropriate disposal area as per direction of En...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing Size Stone masonry with hard stone in foundation & plinth with

Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Flush/ Ruled pointing: Pointing on stone work with cement

mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining,

including cost of materials, labour, curing as per s...

Painting Steel work with Deluxe Multi Surface Paint to give an even

shade. Two coat applied @ 0.90L/10 m² over an under coat of primer

applied @ 0.80 L/10 m² of approved brand and manufacture includ...

Finishing walls with Acrylic Smooth exterior paint of required shade :New

work (Two coat applied @ 1.67L/10 m² over and including priming coat of

exterior primer applied @ 2.20 kg/10 m²) with paint ...

Providing and fixing Steel work in built up tubular (round, square or

rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,

fixing in position and applying a priming coat of approv...

Providing and Supplying of Pre Cast RCC Sofa 5feet length without hand rest including painting fixing etc as per drawing & technical specification with all lead lift loading and unloading charges, cos...

Standard swing 2 seater Main Frame 1inch NB Top bar 2inch NB Rubber Chain frp 4 MM Thickness (Area 9 x 4)(Area: 2.8m*1.3m, Leg support: 40mm NB pipe, Top Bar: 50mm NB pipe, Seat: FRP bucket seat, Bear...

Dual pipe side by side see saw Main(Area: 1m*1.9m, Lever: 70mm NB pipe, Column: 25mm NB pipe, Seat: moulded FRP, Bearing: Heavy duty pipe bearing) including all lead & lifts, cost of all materials of ...

Two way slide GI pipe ; 12 gauge FRP Slide 3 to 4MM Thickness, ladder; GI sheet steps including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries and all the oth...

Platform Merry go round with cross bars (Area: 1.2m/1.5m/1.8m dia, Height: 1m, Platform: non skid aluminum plate, Outer ring: 35mm NB pipe, Hand rail: 25mm NB pipe, Bearing: Triple Heavy Duty Bearing ...

Providing and fixing of typical Logo board as per

specifications and drawing. Two ACP Sheet of 3mm thick,

top and Bottom plate duly welded/bolted with MS Square

angle 25mm x25mmx 5mm size on back and ...