NIT No GE/ND-122/2024-25

Amount

B&R PORTION: Supply & planting following trees /plants/ shrubs/ hedge (For Srl item No 01.00 to 26.00) complete all as specified and directed by Engineer-in-charge including preparing composed pit of required size (1.20x1.20x1.20 meter or 0.45x0.45x0.45 meter) as per requirement size in any type of soil applying anti temite treatment, refilling of the pit with compost (menure, sand & sweet earth mixed in (1:1:4) breking clods, ramming & flooding with water filling fine dressing & removal of rubbish, unserviceable material & surplus earth complete all as specified and directed by Engr-in charge. (i) ATT shall be in form of 200 gms neem cale mixed with each cum of compost followed by ATT chemical (Dursban) applied at 50 ml per liter in 1st watering 30 ltr per pit. (ii) Rates for following item include supply & application of manure /sweet earth, ATT chemical, sand, fertilisers and transportation complete. (iii) Height of plant is to be measured from ground level. Note: It is applicable for ser item No 01.00 to 26.00 Trees Saraca asoca (i) spacing @1.5-2m (ii) Ht 5'-6' girth : 8 to 12 cm, Pit size (1.20x1.20 m)

Alstonia Scholaries (i) spacing @10-15' (ii) Ht 5'-6' girth : 8 to 12 cm, Pit size (1.20x1.20 m)

Jacaranda Mimosifolia (i) Spacing @ 8-10' (ii) Ht 5'-6' girth : 2 to 4 cm, Pit size (0.45x0.45)

Gold Mohar (i)Spacing @ 10-15 (ii) Ht 5'-6' girth : 8 to 12 cm, Pit size (0.45x0.45m)

Plumeria Alba (i) Spacing @ 10-15' (ii) Ht 6'-7' girth : 8 to 12 cm, Pit size (1.20x1.20 m)

China Orange (i) Spacing @ 10-15 (ii) Ht 3'-4' girth : 8 to 12 cm, Pit size (1.20x1.20 m)

Shrubs Budha Velly Bamboo

Ficus panda

Galphimia Glauca

Plumbego

Ficus Rajnold

Largestonia Indica

Bauhinia Alba

Tabormontana Verigata

Acleefa

Eranthimum

Calliandra

Tecoma Gaun Chauri with height 3'-5'

Palm Cycus Palm with Height 2'-3'

Cycus Circinalis height 3'-4'

Lonila with height 2'-3'

Phoenix Palm with height 3'-4'

Ground Covers (Hedge) Golden duranta with height 9"

Clerodendron Inermi with height 6"

Iresine with height 9"

Opiopoghum with height 9"

Maintenance of all plants, shrubs, Hedges, grass etc for a period of 06 month after date of completion by employing 3 (three) skilled Gardener per day to ensure healing up keep,of watering plant, pour manure, carryout periodic tilling and use pesticides, cutting grass and removing unwanted grass & plants at work site complete all as specified and directed. Note :- (i) During the period any plant, shrubs, grass etc is found dead, not true to name or size as specified or not in satisfactory growth plat of approved size & shape shall be replaced by the contractor. (ii) If contractor fail to comply above points the work will be carried out through other agency and amount will be recovered from the earnest money and 10% of reserved money (10% of contract amount will be kept for guarantee period. (iii) Supply & application of manure, sweet earth sand, ATT Chemical & pesticides etc, Fertilisers etc are included in the quoted unit rate during Maintence period.

M&L for laying of 10 cm x 10 cm x 8 cm cobblestones for pavement, to be installed in any pattern. The scope includes installation of edge restraints, compaction, and joint filling. The cobblestones must be of high quality, uniform in size, and free from defects, with approved joint fillers such as sand or grout. The stones will be laid tightly in the predetermined pattern, ensuring consistent joint widths. Edge restraints will be installed along the perimeter to prevent the movement of stones, and the surface will be compacted using a vibratory plate compactor to settle the stones and enhance stability. After laying, joints between the stones will be filled with sand or grout to lock them in place, with any excess material cleaned from the surface complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in Soft/loose soil including removal of debris outside MOD premises complete all as specified and directed.

M&L for Hardcore of gauge n.exc 63mm broken stone or boulders deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D-2 using (40mm graded aggregate) as in sub base of floor complete all as specified and directed.

M&L for 25mm thick cement concrete type B-0,1:2:4 (12.5mm graded aggregate) as in sub bsae floor complete all as specified and directed.

M&L for machine pressed precast concrete inter locking pavers block (Glossy Finish) PU Coated of any shape, colour and pattern (as aprroved by engr in charge) conforming to IS-15658-2006 of 80 mm thickness, M-40 Grade with grey cement and no pigment laid over 50mm thick sand cushioning (Sand shall be measured supply only) complete all as specified and directed

Supply only sand for laying of pavers complete all as specified and directed.

Providing and fixing at site factory made kerb stone of required shape and size of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required also incl dismantling of existing kerb stone complete all as specified and directed.

M&L for one coat of synthetic enamelled paint in any approved pattern and colour including preparation of new or previously untreated surfaces of Kerb stone/ concrete/ plaster surfaces exceeding 10cm width or grith not other wise provided complete all as specified and directed.

M&L for 22-25 mm thick Red Agra sand stone as in wall cladding, steps, footpath gang saw machine cut edges , polished, over 20mm thick cement screed in CM 1:4,set and jointed in cement mortar 1:3 and pointed in cement mixed with approved pigment to match the colour of the stone ( Note:- Size and colour of stone to be matched with existing stone) complete all as specified and directed.

M&L for 25-30 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sq m area and not exceeding 0.5 sq m fixed with and including one number SS clamps (grade-202) of flat-30mm X 2mm , making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing &including silicon treatment over 15 mm thick backing layer in CM 1:4 complete all as specified and directed. Note:- Size and colour of stone to be matched with existing stone

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 making good of dismantled portion by plastered work and match with existing surface complete all as specified and directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6M mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for 15 mm thick cement plaster in CM (1:4) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement (incl new brick work) complete all as specified and directed.

M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth etc not exceeding 10 Sqm on plan for shafts, cesspits, manholes pier holes, foundation etc and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing out side the MOD land complete all as specified and directed.

M&L for RCC design mix M-25 (20 mm graded aggregates) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns (Column upto plinth beam) etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm on soft/loose soil complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

All as per item No 49.00 above but 5 mm dia and over upto and incl 10 mm dia in stirrups, spacers and binders complete all as specified and directed by Engr-in-Charge.

Form work for flat rough finished surfaces of concrete to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

S&F Plates chequered (Fe-410 -W(Gde E-250) quality-B) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment including all required assesseries complete all as specified and directed..

S&F Stairs (framed) Fe-410 -W(Gde E-250) quality-B including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete all as specified and directed.

S&F Steel work in tubular tru-sses of required shape including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.80 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, colour and pattern as approved by engr in charge complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide primer complete all as specified and directed.

Taking down chowkhats or frame without taking off shutters size exc 1.50 sqm but n.exc 4.0 sqm complete all as specified and directed.

S&F powder coated aluminum door using 96.6mm X 44.8 mm X 1.6 mm aluminium chowkhats 84.0 x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails including mortice lock vertical type mild steel 100 mm size (Make : Godrej/Harrison) 02 Nos tower bolt 150 mm , door handles, SS butt hinges 125 mm 04 Nos, hydraulic door closer and fittings complete all as specified and directed by Engr-in-Charge bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain glass fixed with snap beading rubber of suitable size Make of glass (MODI/FLOAT/ATUL) complete all as specified and directed.

S&F powder coated aluminium window incl frame using 63 mm X 38 mm X 1.6 mm chowkhats with 48mm X 48 mm X 1.6mm openable section as in shutter , 5.5 mm thick glass panes of approved make with rubber for fixing glass and including builders hardware such as aluminium handles 100 mm -02 Nos, tower bolts 100 mm 02 Nos, butt hinges SS 100 mm 04 Nos etc complete all a specified and directed by Engr-in-Charge

S&F aluminium ornamantal grill 8mm dia 75x95mm aperture complete incl U channel complete all as specified and directed.

Dismantling wall & ceiling boards of any description as in panelling ceiling, partition, cup boards etc incl cover fillets in any surfaces complete all as specified and directed.

S&F Mineral fibre ceiling boards 12 mm thick 600 X 600 mm size incl grid 25 X 25 X 1.6 mm thick GI powder coated angles 25 X 35 X 1.6 mm size ‘T’ section fixed with suspenders from ceiling etc complete all as specified and directed.

S&F prelaminated PVC rigid foam sheet wall panelling of 5 mm thick stuck on inner frame work of 35 mm wide strips of 5 mm thick rigid foam sheet. The strips should have a groove of 6 mm width and 2 mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 300 mm C/C. The PVC strips to be fixed to the all using 65 mm long MS screws through the groove in the strip by using PVC fasteners including necessary moulding work on doors, windows, pillers and opening etc complete all as specified and directed at site Note: (a) Work for fixing of wall panelling shall be got executed through manufacturers authorised applicators only under the close supervision of their technical staff. (b) The entire qty of wall panelling and their allied ancillaries shall be procured directly from the manufacturer or their authorised dealer only.

M&L for Treatment of roof with reinforced elastomeric liquid waterproofing membrane of 400micron thickness having SRI of 130, tested as per ASTM E 1980 (with Solar Reflectance and Thermal emittance tested as per ASTM C 1549 and ASTM C 1371, respectively). The coating should have water absorption less than 1% as per IS: 101 (P-7/Sec-1) 1989, with the ability to resist heat yp!e 1200C as per IS: 101 (P-7/Sec-3) 1990 having VOC less than as per ASTM D 3960 and should have excellent resistance to transmission of ponded water up to 3.5 bars of pressure for 7-days.lt should also be resistant to Ammonia solution, Sodium nitrate, Sodium hydroxide, along with water and soap solution as per IS: 101 (P-7/Sec-2)1990. The waterproofing membrane will be laminated with 25—40-micron thick transparent Nano modified composite crosslinking polymeric coating with a minimum of 40% solid content as per IS: 101 (P-8/Sec-6) 1993 and also should pass Impact test as per IS: 101 (P5/Sec-3) 1988 along with having dust and water repellent & anti-graffiti property passing Scratch hardness test of 500g as per IS: 101 (P-5/Sec-2) 1988. It should also pass Cross Cut Adhesion test as per IS: 101 (P-5/Sec-2) 1988. The Polymeric coating should have a self-cleaning and easy-to-clean property with excellent weather stability and DPR (Dirt pickup ratio). Surface preparation includes pressure wash cleaning to remove all dust, fungus, etc., with pressure washer after repairing the existing roof having old bitumen membrane by filling cracks, potholes, holes with waterproofing compound having compressive strength as per IS-4031 part-6-1988 & permeability of water as per IS2645-2003 complete all as specified and directed. Make: Ms Asian Paints Ltd/ Ms Berger Paints India Ltd/ Ms IWL India Ltd Note :- (a) Repairs of existing roof where required for said treatment shall also inclusive under unit rate The work shall be got done through manufacturers authorised applicators only under the close supervision of their technical staff.

S&F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 -W, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing including necessary double steel scaffolding where required upto two storey bldg complete all as specified and directed.

S&F welded steel wire fabric n.exc 4 Kg per Sqm complete to steel member complete all as specified and directed.

Taking down plastering on brick or stone walls, etc. incl racking out joints, hacking for key, scrubing down with water, etc.in cement or cement lime plaster, any description complete all as specified and directed.

M&L for 15 mm thick ready mix plaster on brick or concrete surfaces of wall in two layers (thickness of each layer not more than 10 mm finished even & smooth. The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engr-in-Charge.

M&L for 5mm thick Ready mix plaster (Make : Ultratech) on concrete surfaces on ceiling finished even and smooth complete all as specified and as directed by Engr-in-Charge

Dismantling floor hearth or wall tiling including cement mortar bedding and removing rubbish of the premises complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick(Square/Rectangular) polished area of each tile not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white of coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceremic tiles in vertical surface of size 450X300X7 mm on vertical Surfaces of wall including rendering 10mm thick in cement mortar 1:3 set and jointed in net cement slurry and pointed in white or colour cement to match complete all as specified and directed.

E&M PORTION: Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as ceiling rose, pendent holders, regulators and socket point etc and making good the disturbed surface & wall/ floor complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for one light/ fan/ exhaust fan point controlled by one no, one way 5 Amp switch complete all as specified and directed. Note: (i) Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

All as per item No 74.00 above but One bell / buzzer point controlled by one bell push complete all as specified and directed.

All as per item No 74.00 above but One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board complete all as specified and directed.

All as per item No 74.00 above but One 3 pin 5 Amps socket outlet point controlled by one way switch on same board complete all as specified and directed.

All as per item No 74.00 above but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 socket outlet point on independent board complete all as specified and directed.

S&F in replacement of Modular switch 6 amps 240 V AC one way with ISI mark complete all as specified and directed.

S&F in replacement of modular switch 16 A SP one way 240 volts ISI mark complete all as specified and directed.

S&F in replacement modular socket 6 A Multi socket for 2 pin and 3 pin 240 volts complete all as specified and directed.

S&F in replacement of modular socket outlet 16 A-2/3 pin combined 240 volts complete all as specified and directed.

S&F in repair modular bell push 6A with Neon 1 module 240 volts complete all as specified and directed.

S&F in replacement electric bell Ding-Dong AC 230 Volt complete all as specified and directed.

S&F in replacement of submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V grade 2 x 4 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed. Note: Two run of main cable, one run of earth wire and one run length of PVC conduit of suitable bore shall be considered as one run

S&F in replacement of factory made sheet steel distribution boards, double door, SPN 12 way, concealed type, 240 volts AC with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed.

Supply and fixing in replacement of MCB, 240V 10KA, B/C curve MCB SP 6 to 32 Amps complete with connection complete all as specified and directed.

Supply and fixing in replacement of MCB, 240V 10KA, B/C curve MCB SP 40 Amps complete with connection complete all as specified and directed.

Supply and fixing in replacement of MCB, 240V 10KA, B/C curve MCB SPN 32 Amps complete with connection complete all as specified and directed.

Supply and fixing in repair Rigid non-metallic PVC conduit size 25mm bore exclusive of boxes (junction/ terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.

Supply and fixing in repair Rigid non-metallic PVC conduit size 40mm bore exclusive of boxes (junction/ terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.

Supply and fixing in repair modular AC box with MCB Protected Socket PVC Plastic Base Model (White) single pole & neutral with a 2 pin & earth plug and socket complete with MCB SP 20 Amp, 230 volts complete all as specified and directed. Make: Havells Cat Part No DHDMCSN0251020 or equivalent of make as specified in PS.

Taking down carefully LAN/telephone cables from existing conduit/casing capping and refixing the same including accessories such as couplers, lock nuts, saddles, pipe hooks etc and making good the disturbed surface & wall/ floor complete all as specified and directed.

Supply and fixing in repair aesthetically designed celing LED light (2x2) of 36 W fixture with spun aluminium base, stainless steel arm, spun aluminium holder cap, CRCA sheet back plate, frosted glass diffuser complete all as specified and directed.

Supply and fixing in replacment BLDC ceiling fan 1200 mm sweep,300 RPM, 230 volts with remote having full copper motor & ribbed alluminium blades for higher air delivery,powder coating provides longer life complete with accessories including making arragement to hanging of fan to ceiling with proper hook nut bolts complete all as specified and directed. Note: Old unsv item shall be deposited to MES store yard in safe custody.

Tanveer Associates (BID ID -3330743)