Loading
Loading…
Loading…
Tender Value
₹8.6 Cr
EMD Value
₹7.6 L
Closing Date
2 Nov 2026, 6:00 pm
CWE DINJAN
COMMANDER WORKS ENGINEER DINJAN
ADDN ALTN AND SPL REPAIR TO CERTAIN MD ACCN AT DINJAN MIL STN UNDER GE DINJAN
2026_MES_791687_1
84588/E8
Open Tender
Civil Works
Item Rate
540 days
GE DINJAN
AS PER TENDER DETAILS
8 documents required · 8 mandatory
₹3,000
GE DINJAN
₹7.6 L
Yes
29 Sept 2026
29 Sept 2026
9 Nov 2026
29 Sept 2026
2 Nov 2026
28 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolition of cement concrete in ground floor n exc 15 cm thick (un reinforced) complete all as specified and directed. | - | Cum | - | - |
| 2 | M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in chajjas top, laid to a minimum consolidated thickness of 25 mm as leveling course, laid and compacted in min slope 1:30 over top of chajja complete all as specified& directed by Engr-in-Charge. | - | Sqm | - | - |
| 3 | Dismantling of plain or corrugated sheeting all as specified. | - | Sqm | - | - |
| 4 | Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings. | 10 | Sqm | - | - |
| 5 | S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. | 1,850 | Sqm | - | - |
| 6 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified. | 250 | Sqm | - | - |
| 7 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets as directed. | - | Sqm | - | - |
| 8 | S&F for aluminium anodised snap grid frame work of size 600mm x 600mm frame work for ceiling with screws and with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4 mm thick non asbestos E-board (plain) pre painted, HSPC fixed to frame complete all as specified and as directed by Engr in charge. | 950 | Sqm | - | - |
| 9 | Dismantling timber scantlings unframed work 40 sqcm and over in section in any position complete all as specified and directed. | - | Cum | - | - |
| 10 | Dismantling timber in unframed, fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section | - | Rm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 6.07 MB
BOQ_887610.xls
BOQ • 0.88 MB
TenderDocuments.pdf
Tender Documents • 1.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .