Improvement works to the steps provided along the penstock from Anchor 16 to Anchor 22 Renovation works to the Police Guard Room and Valve House Building by replacing the damaged windows, providing electrification with allied works at Suruliyar Upper

Amount

Dismantling, clearing away and carefully stacking of materials useful for re-use for any thickness of Stone Masonry walls in cement mortar under 3m high including cost of labour, T&P, head load, loading & unloading etc., complete.

Dismantling, clearing away and carefully stacking of materials useful for re-use of the dilapidated windows including lead, lift, etc., complete.

Chipping of concrete and roughening the surface Platform and Floor of Police Guard, Wall Plastering including cost of all materials, labour, lead, lift, head load etc., complete.

Clean removal of cement plaster from walls / ceiling and clearing away the debrises from the site including scaffolding charges, cost of labours, lead, lift, tools & plants, etc. complete.

Dismanting the existing RCC and cleaning away from the site for an initial lead of 10m and lift of 2m including cost of labour, lead, lift, T&P, etc., complete.

P.C.C 1:3:6 for foundation & flooring using 12mm to 20mm HBG metal including cost of all materials, labour, lead, lift, head load curing etc., complete.

Providing steel centering, shuttering for all R.C.C works with proper slope and dimension as per the direction of engineer including cost of materials, labour, lead, lift, T&P, etc., complete.

Providing steel reinforcements to all R.C.C works as per the direction of engineer, including cost of all materials, labour for cutting, bending, placing and typing in position, lead, lift, T&P, etc., complete.

RCC 1:1½:3 using 12mm to 20mm HBG metal for roof slab, beam, lintel, loft, sunshade etc., complete but excluding cost of reinforcement and centering charges etc., complete.

Supplying, fabricating and fixing of 4 leaf steel window size using 35 x 35 x 5mm angle for outer frame welded with middle T of Size 35 x35 x 5mm and 12 nos 10 mm M.S, bar at equal Spacing and using 25 x25 x 4mm angle for shutter frame covered with 18 gauge M.S Sheet at bottom and plain thick glass at top including cost of steel, hold fast, hinges,locking arrangements, dismantling old damaged windows and fixing new windows in position including painting two coats of enamel paint over one coat of red oxide primer includng lead,lift, etc., complete.

Providing R.R Masonry in CM 1:6 for Penstock including cost of cement, M.sand, labour charges,T&P, lead, lift, head load of 100 mtrs etc., complete but excluding the cost of Rough stone & Bond stone.

Plastering with CM 1:5, 12mm thick in wall / ceiling including cost of materials, labour, curing, lead, lift, T&P, etc., complete.

Floor finishing with CM 1:4 , 12 mm thick including cost of materials, labour, curing, lead, lift, T&P, etc., complete.

Pointing with cement mortar 1:3 for revetment including all cost of all materials, labour, scaffolding, lead, lift, etc., complete.

White Washing with two coat by using white cement after through scrapping and washing /cleaning the old surface including the cost of all materials ,lead , lift ,labour ,T&P,etc.,complete.

Colour washing ,using first quality of Emulsion Paint of two coats over priming coat to the side of the building including cost of all materials,lead, lift, labour, T & P etc complete

Painting all exposed faces of steel works with two coats of approved enamel paint including cost of all materials, lead, lift, labour, etc., complete.

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated unsheathed Sc Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch with painting of suitable colour for open PVC light point / fan point (For electronic regulator)

Wiring with 2x4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 mm x 100 mm x 75mm TW switch box for 15 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point.

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box.

Supply and fixing of 23 CM SL Bracket with fancy glass shade with 15W CFL bulb.

32 AMP DPIC Main switch.Supply and fixing of 32 Amps DP Switch of 500 V with metal clad with fuse and neutral (Side Handle) on suitable TW Board , with earth connection only

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V on 7/20 G.I bearer wire for service connection mains.

GST 18% as per Govt. Norms