Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.8 LAccepted-AOC M S PLOT NO 2273 M S KHATA NO 305 1289 AT RAMPUR COLLIERY PO BRAJRAJNAGAR DIST JHARSUGUDA ODISHA 768225 | JHARSUGUDA | ODISHA | 768225 | ₹7.8 L | L1 | Accepted-AOC The amount quoted by L1 bidder R.R. Electrical is 21.90 percent below the estimated cost/updated cost |
| 2 | L2₹8.5 L+₹70,658.82 (9.06%)Rejected-Finance | ₹8.5 L+₹70,658.82 (9.06%) | L2 | Rejected-Finance On being L2 |
| 3 | L3₹9.1 L+₹1.3 L (17.3%)Rejected-Finance 39B IBRAHIMPUR ROAD JADAVPUR KOLKATA WEST BENGAL 700032 | KOLKATA | KOLKATA | WEST BENGAL | 700032 | ₹9.1 L+₹1.3 L (17.3%) | L3 | Rejected-Finance On being L3 |
| 4 | L4₹9.3 L+₹1.5 L (19.6%)Rejected-Finance | ₹9.3 L+₹1.5 L (19.6%) | L4 | Rejected-Finance On being L4 |
| 5 | L5₹10.6 L+₹2.8 L (36.0%)Rejected-Finance AT GANDHI CHOWK BRAJRAJNAGAR DIST JHARSUGUDA ODISHA 768216 | BRAJRAJNAGAR | JHARSUGUDA | ODISHA | 768216 | ₹10.6 L+₹2.8 L (36.0%) | L5 | Rejected-Finance On being L5 |
| Sl No | Description | Qty | Unit | R.R. ELECTRICAL L1 | M/S H.A. ENTERPRISES L6 | Cellkon Infra Pvt. Ltd. L3 | Subodha sankalapa L5 | SAURYAJYOTI RENEWABLES PVT LTD L4 | SOLAR INFRA L2 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply of Off-grid Solar Photovoltaic Power plant conformig to MNRE specifications consisting of 450Wp x 24 nos. (10.8KWp) of Mono crystalline silicon solar cells, 12 Volt, 200Ah x 10 nos. of Battery bank, 10KV MPPT Inverter (3 Phase), necessary protections, Lightning Arrestor, GI mountin structure of suitable strength & all other accessories as per requirement. | 1 | Set | 6,34,634 ₹6,34,634 Lowest | 8,61,347 ₹8,61,347 | 6,90,000 ₹6,90,000 | 7,70,500.15 ₹7,70,500.15 | 7,45,300 ₹7,45,300 | 6,90,784.46 ₹6,90,784.46 |
| 2.00 | Installation, testing and commissioning for 10.8KWp system (Complete system including the civil and electrical requirement). | 1 | set | 23,430 ₹23,430 | 31,800 ₹31,800 | 26,000 ₹26,000 | 22,199.5 ₹22,199.5 Lowest | 27,500 ₹27,500 | 25,503 ₹25,503 |
| 3.00 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. | 0.43 | cum | 169 ₹72.67 Lowest | 230 ₹98.9 | 188 ₹80.84 | 215.15 ₹92.51 | 190 ₹81.7 | 184.47 ₹79.32 |
| 4.00 | Providing and laying in position excluding cement concrete of level: specified grade the cost of centering and shuttering - All work up to plinth-1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.43 | cum | 4,723.5 ₹2,031.11 Lowest | 6,410 ₹2,756.3 | 5,600 ₹2,408 | 4,775 ₹2,053.25 | 5,450 ₹2,343.5 | 5,141.45 ₹2,210.82 |
| 5.00 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, bufing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing
accessories such as nuts, bolts, fasteners etc.). | 32 | kg | 657.9 ₹21,052.8 Lowest | 900 ₹28,800 | 750 ₹24,000 | 698.02 ₹22,336.64 | 750 ₹24,000 | 716.12 ₹22,915.84 |
| 6.00 | Direction and Place Identification signs with size more than 0.9 sqm size board.
Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67-2010 made of high intensity Micro-Prismatic Grade Sheeting (Type XI) vide clause 801.3.3 fixed over Aluminium composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminium with overall thickness of 4mm and aluminium skin of thickness 0.3 on both side, the ACM shall conform to Table 800-1 of specification and High Intensity Micro Prismatck Grade Sheeting shall conform to Table 800- 3 of specification. The printing on the high intensity grade sheeting shall conform to Clause 801.3.7 with water based latex optimized transparent ink as specified by the sheeting manufacturer, supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to ground by means of properly designed foundation with M15 grade concrete 450x450x600mm. The ACM sheet shall be fixed to the post with four minimum four number breakaway bolts. | 1.35 | sqm | 4,657 ₹6,286.95 | 7,380 ₹9,963 | 5,324 ₹7,187.4 | 4,122.04 ₹5,564.75 Lowest | 5,250 ₹7,087.5 | 5,069.15 ₹6,843.35 |
| 7.00 | Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC | 1 | Nos | 92,548.39 ₹92,548.39 Lowest | 1,25,924.57 ₹1,25,924.57 | 1,01,038.49 ₹1,01,038.49 | 1,10,091.88 ₹1,10,091.88 | 1,08,481.41 ₹1,08,481.41 | 1,00,736.92 ₹1,00,736.92 |
Tender Value
₹10.0 L
EMD Value
₹12,500
Closing Date
17 Apr 2026, 5:00 pmClosed
Anilkumar KS Staff Officer(EnM) Lakhanpur Area
Anilkumar KS Staff Officer(EnM) Lakhanpur Area GM Office Bandhabahal Dist-Jharsuguda Odisha-768211 Mob-7987258691
Supply, Installation, and Commissioning of Roof top Solar power System at Saraswati Shishu Vidya Mandir, Bandhabahal, under the CSR works of Lakhanpur Area, MCL.
2026_MCL_358052_1
MCL/LKPA/EnM/eNIT/26-27/07, Dt-06.04.2026
Open Tender
Electrical and Maintenance Works
Item Rate
30 days
BIT Colony, Lakhanpur Area
Please refer Tender documents.
4 documents required · 4 mandatory
₹12,500
25 Jul 2026
6 Apr 2026
20 Apr 2026
6 Apr 2026
17 Apr 2026
7 Apr 2026
6 Apr 2026 - 10 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| - | Supply of Off-grid Solar Photovoltaic Power plant conformig to MNRE specifications consisting of 450Wp x 24 nos. (10.8KWp) of Mono crystalline silicon solar cells, 12 Volt, 200Ah x 10 nos. of Battery bank, 10KV MPPT Inverter (3 Phase), necessary protections, Lightning Arrestor, GI mountin structure of suitable strength & all other accessories as per requirement. | - | Set | - | - |
| - | Installation, testing and commissioning for 10.8KWp system (Complete system including the civil and electrical requirement). | - | set | - | - |
| - | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. | - | cum | - | - |
| - | Providing and laying in position excluding cement concrete of level: specified grade the cost of centering and shuttering - All work up to plinth-1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| - | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, bufing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing
accessories such as nuts, bolts, fasteners etc.). | - | kg | - | - |
| - | Direction and Place Identification signs with size more than 0.9 sqm size board.
Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67-2010 made of high intensity Micro-Prismatic Grade Sheeting (Type XI) vide clause 801.3.3 fixed over Aluminium composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminium with overall thickness of 4mm and aluminium skin of thickness 0.3 on both side, the ACM shall conform to Table 800-1 of specification and High Intensity Micro Prismatck Grade Sheeting shall conform to Table 800- 3 of specification. The printing on the high intensity grade sheeting shall conform to Clause 801.3.7 with water based latex optimized transparent ink as specified by the sheeting manufacturer, supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to ground by means of properly designed foundation with M15 grade concrete 450x450x600mm. The ACM sheet shall be fixed to the post with four minimum four number breakaway bolts. | - | sqm | - | - |
| - | Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC | - | Nos | - | - |
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.79 MB
Tendernotice_2.pdf
PDF • 1.26 MB
BOQ_370936.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .