Const. of SKAC Office Building

Amount

CIVIL WORKS :

Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels.

Demolishing C.C. floors of various thickness including top layer and base course and disposal of debris as directed for all levels.

Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels

Dismantling all types of corrugated / trapezoidal sheet roofing including ridges, hips valleys and gutters etc and stacking the materials as directed by the department for all levels.

Earth work in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. A) Up to a depth of 2.00m below the existing ground level. a) In ordinary soil

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatring, complete. A) Brick on flate soling

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and curing complete ( shuttering where necessary shall be measured and paid separately ) (a) In prop. 1:3:6

Supplying fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work? R.B. walling including straightering, cleaning, cutting and bending to proper blocks, supports chains, spacers etc. complete. ( No extra measurment for lap, hook, chair, anchor etc. will be entertained in the measurment as they are included in the rate) ( Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Jindal steel?Shyam steel/RINL. I) TMT Corrosion resistant steel ( CRS) reinforcment bar 16 mm

Providing form work of ordinary timber planking so as to give a rough finish including centering, shutting, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exeeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in. a) In sub-structure up to plinth level ii) 25mm thick plank.

Super structure

Providing and laying plain /reinforced cement concrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complte but excluding cost of form work and reinfor cement for reinforced cement concrete work ( from work and reinforcement will be measured and paid separately) Sub-structure

Super structure

Brick work in cement mortar with 1st class brick including racking out joints and curing complete as directed. Sub structure upto plinth level including dewatering if necessary.b) in proportion 1:4

1st class brick nagged wall in Cement mortar including racking out joints and curing complete as directed in supper structure above plinth up to st floor level ( protruding M.S. rod/Tor steel of column to be embeded in cement morter and will be measured and paid separetely ) 112mm thick brick wall a) In cement mortar in proportion 1:4 Super structure

Earth/sand Filling in plinth layer not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. c) with river sand or silt ( predominantly non plastic) by truck carriage including loading and unloading.

65mm thick cement concrete floor consisting of 50mm under layer of cement concrete in prop 1:3:6 ( 1 cement :3coarse sand:6coarse aggregate of 25 mm and down ) and 15mm thick wearing layer in cement concrete in prop. 1:1:2 ( 1 cement :1 coarse sand:2 coarse aggregate of size 10mm down ) laid in panels and finished with a floating coat of neat cement finish ( using cement slurry for bond @2.75 kg per square metre of floor area ) including curing etc. complete as directed .

15mm thick cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not execeeding 80mm girth and finishing even and smooth including curing complete as directed. A) on rough side b) in cement mortar 1:4

10 mm thick cement plaster in single coat on fair side of brick / concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. b) in cement mortar 1:4

Providing wood work in frame ( chowkhats) of doors, windows clerestry windows and other similar works wrought, frame and fixed in position in contact with C.C. or brick masonary wall including supplying, fitting and fixing with M.S. Hold fast ( 40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C. and masonary as directed and specified. b) With 1st class timber ( Bonsum/Sundi)

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face panels conforming to relevent I.S. code including oxidised iron butt hinges ( 100mm x 75mm x3.5mm) 6 nos with necessary wood screws. a) Decorative type face panel and block bord core. i) 40mm thick.

Providing, fitting and fixing aluminium sliding windows and ventilations of standard sections without horizontal glazing bars, joints mitred and welded ( manufactured to relevant IS specification ) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc. as required complete as specified and directed for all levels . (b) 3 track sliding window iii) 6mm coloured glass

Providing fitting and fixing fully glazed clerestory Window and fan light including fitting and fixing 2 M.S. pivot hinges (75mmx20mmx3mm), eyehook and nylon chord complete ( glass panes shall be measured and paid separately) C) with 1st class local wood (hollock/ sundi) iii) 30mm thick.

Providing and fixing clear sheet glass bedded in putty and fixed with/ without wooden bidding including necessary cutting and glass to be required sized (payment for wooden bead shall be made separately) iii) Area of glass panes exceeding 0.52 m² a)5.00mm thick.

Providing , fitting and fixing MS grill of required pattern for windows / clerestory windows /opening with MS flats at required spacing in frame all round MS bars with round headed bolts and nuts or screws. ii) Ornamental grill.

Applying priming coat over new wood based surfaces over 100mm in girth/ width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter sand papering and knotting. a)With ready mixed paint , wood primer( pink)

Painting two coats ( excluding priming coat) on new wood and wood based surfaces with enamel paint of approved brand and manufacture ( Asian paint/ Berger paint / ICI paint/ J & N paint/Nerolac) to give an even shade including cleaning the surfaces, of all dirt, dust and other foreign matter sand papering and stopping. i) Surfaces over 100mm in width or girth. a) General purpose ( asian paint/ berger paint/J&N paint/Nerolac).

Supplying fitting and fixing brass fittings of approved make , reasonably smooth , free from sharp edges and corners , flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete ( bright natural matt & Satin finish) Tower bolt. ii)250mm x 12mm

c) Door handle

) Butt hinge i) 125mm x 50mm x 4mm

Providing, fitting & fixing anodized aluminium partition walls of standard sections of approved brand ( HINDALCO/ NALCO/ BALCO/ JINDAL/ Other equivalent primary producer ) joints metered and welded( manufacture to relevant I.S specification) and providing and fitting angle cleat, rubber gasket, bolting device screws etc. at all levels. (i) Partly 6mm thick glass panes and 12mm prelaminated ply board.

Providing, fitting and fixing anodized aluminium framed glazed doors with anodized aluminium frame made of 100mmx45mmx2.5mm section of approved brand ( HINDALCO/NALCO/BALCO/ JINDAL/Other equivalent primary producer) with door style of size 88mmx45mmx2.5mm, top rails 50mmx45mmx2mm lock rails 100mmx45mmx2mm and bottom rails 100mmx45mmx2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc. complete as specified and directed by the department at all levels. (i) 6mm clear glass.

Providing two coats of J.K. wall putty ( white cement based putty for concrete / mortar walls and ceiling both internal and external ) after removing all loosely adhering material from wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department .( thickness of the coat is maximum 1.5mm)

Wall painting ( two coats ) with plastic emulsion paint approved Brand and manufacture ( Asian paint /berger paint /ICI paint / J&K Paint / Nerolac ) on new surface free from mortar dropping and Other foreign matter and sand prepared smooth.

Providing Vitrified floor tiles of approved quality of specified size , shape and thickness not less than 18mm on floors wall , skirtings , risers and treads of steps over 15mm thick bas of cement mortar in prop. 1:3 ( 1cement:3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile ( Choksey/Sika/pedelite/rouf)/ white cement slurry mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. ( Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department. a) Normal range ( many/Orient/Nitco/Varmora/ Jhonson make )ii) Of size 600mmx600mm and above

Providing and fixing Stainless Steel ( Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature ( wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge. ( For payment, only weight of stainless steel member is to be considered. No extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered).

INTERNAL WATER SUPPLY

Labour for sinking tube well with 40mm (internal) dia G.I. pipes up to having strata, having potable water including fitting and fixing strainer hand pump and other accessories as directed complete as soil.

Labour for test boring with 40mm (internal) dia G.I. pipes including keeping surplus of earth and every 2.00m after first 3.00m depth and delivering the same in nearest P.W.D. camp in the small tin container ( container, scaffolding, tools etc. will have to be arranged by the contractor at his own cost)

Supplying fitting and fixing hand pump for 40mm dia tube well with all accessories complete as directed. I) Maya popular – 6

Supplying fitting and fixing suction pipes plin/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes complete as directed. A0 G.I. pipe iii) 40mm diameter

B) PVC PIPE SUPREME / PRINCE / FUSION / SFMC Band iii) 40mm diameter

Supplying fitting and fixing ISI approved PVC filter 3.00 meter long iii) 40mm diameter

Supplying fitting and fixing check valve (non return valve) including thread to pipes. iii) 40mm diameter

Flushing, clearing, washing and watering of the tube well.

Construction of platform of direction ( Tara) hand pump with cement concrete works in proportion 1:2:4 in two layers with a base layer of concrete of proportion 1:4:8 as per approved drawing No. C.E (PHE) – 04/05 including necessary earth work and refilling after completion of work all complete as directed.

Construction of drain with cement concrete works in proportion 1:2:4 in slope 1:50 with a base layer of concrete of proportion 1:4:8 as per respective approved drawings including necessary earth work and refilling after completion of work all complete as directed.

Construction of soak pit

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the staging with manhole cover with locking and clearing arrangement including providing pads of size as required for inlet and outlet pipes (III) 1000 litre capacity a) Sintex make

Providing and fixing Chorinated Polyvinyle Chloride ( CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe. B) Concealed pipe with cutting chases & making good the walls

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand as directed and specified. (G.I. & C.P. pipes will be measured separately ) II) Jaquare make iii) 2-Way bib cock

STOP COCK : Supplying fitting and fixing chrome plated ( C.P) stop-cock of approved brand and size as mentioned below as directed and specified. ( G.I. pipes will be measured and paid separately ) I ) Jaquar iv) 15mm dia, ( Concealed stop cock extra heavy with adjustable wall flange ) Piping Supplying fitting and fixing pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed C) CPVC pipe with CPVC fittings ( Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe)

v) 40mm (OD) diameter

Iii) 25mm (OD) diameter

ii) 20mm (OD) diameter

ELBOW a) 20mm dia

b) 25mm dia

c) 40mm dia

CPVC Tee (40mm)

CPVC Coupler (40mm)

CPVC Union (40mm)

CPVC FAPT (40mm)

CPVC Tank Nipple (40mm)

CPVC Bushing (40mm)

CPVC ball valve (40mm)

CPVC Tee (25mm)

CPVC Coupler (25mm)

CPVC Union (25mm)

CPVC MAPT (25MM)

CPVC FAPT(25mm)

CPVC Tank Nipple (25mm)

CPVC ball valve (25mm)

CPVC Tee (20mm)

CPVC Coupler (20mm)

CPVC MAPT (20mm)

CPVC FAPT (20mm)

CPVC Brass Tee (20x15mm)

CPVC Brass Elbow (20mm)

CPVC Bushing (20mm)

CPVC Brass Tee (25x20)

CPVC SS Clamp (20mm)

Screw

Gutka

CPVC Threaded End Plug 15mm

CPVC Solvent 250 ml

PVC Solvent 250 gm

SANITARY INSTALLATION

Providing fitting and fixing vitreous china pedestal type water closet ( European type pan 400mm high) with seat and lead, CP brass hinges and rubber buffers, CI/MS brackets 40mm dia flush band with fittings including painting of fittings and brackets, required. ( Flushing Cistern to be paid separately ) B) Hindware make a) White viii) Water closet UNIVERSAL “P (Cat. No.20012) ( inclusive of seat cover)

Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. ( Pillar cock, stop cocks, waste coupling are to be paid separately ) 1.13.1 PEDESTAL BASIN ( with pedestal) A ) Parryware Make I ) Duke 660 x 495 ( Cat. No. C8416/27) ( white/ coloured)

Providing fitting and fixing CP soap tray/ soap dish complete as directed and specified. I ) Jaquar Make D ) Kubix ( Cat No. AKB-35731)

BIB COCK : 3.2.1 Supplying fitting and fixing C.P bib cock 15,, dia of approved brand directed and specified. ( G.I. & C.P. pipes will be measured separately ) (ii ) Jaquare make (ii ) C.P.2-way bibcock with wall flange

STOP COCK : Supplying fitting and fixing chrome plated ( C.P) stop-cock of approved brand and size as mentioned below as directed and specified. ( G.I. pipes will be measured and paid separately ) I ) Jaquar iv) 15mm dia, ( Concealed stop cock extra heavy I 0 Jaquar Ii ) 15mm dia ( Anglar stop cock with long thread )

Renewing stainless steel kitchen sink of with PVC waste pipe etc. complete including painting the fittings, cutting & making good the walls wherever required. ( Sink cock, stop cocks, waste coupling are to be paid separately ) A ) Parryware Make Iv ) Single Bowl (224x180) Flat Edge-Glossy ( Cat.No. C8535)

HEALTH FAUCHET

CONNECTION PIPE

WASTE PIPE

CPVC ELBOW

CPVC SOCKET

CPVC PIPE

CPVC PIPE (110mm 4kg)

PVC ELBOW

PVC TEE

PVC COUPLER

SWR DOOR BEND

SWR CLEANING PIPE

PVC REDUCER COUPLER

PVC COWL

FASTNER BOLT

JK WHITE CEMENT

CP PILLAR COCK

SINK COCK

CP FLANGE

CP ROCKET SHOWER

CP BIB COCK

LADIES URINAL

GENTS URINAL

CP HEALTH FAUCET

CP ANGLE VALVE

ALUMINIUM PATTY

CP GRATING

ELECTRIFICATION

SITE of light point/ circuit wiring direction to mcb db switch board as mentioned in respective drawings including circuits from switch board & lights to mcb db with 1.5 / 2.5 / 4 sqmm or as mentioned with FRLS copper wires in conduits with all terminations in copper cable sockets/ lugs, using 19mm casing n capping as required. Switch board to switch board looping & sub circuit from DB shall be 2.5 sqmm x 2 wire. Primary light point wiring with 1.5 sqmm x 2 wire & controlled from local switch board for RAW POWER lighting ( upto 6m )

Secondary light point wiring with 1. 5 sqmm x 2 wire controlled from above primary light point for RAW POWER lighting

Primary light point wiring with 1.5 sqmm x 2 wire & controlled from local switch board for Emergency POWER lighting ( upto 6m )

POWER WIRING : SITC of power point / circuit wiring direct to mcb db or switch board as mentioned in respective drawings including circuits from switch board & S/S to mcb db with 2.5 / 4 / 6 sqmm or as mentioned with FRLS copper wires in conducts with all terminations in copper cable sockets/ lugs, using switch accessories including 19 mm casing n capping as required. This item shall also include the laying of conduits on floor & some extra conduits for future use flexible conduits with partitions etc to be considered. Primary power points shall include circuits from respective MCB DB’S. 1.5 SQMM X 3 WIRW Primary power points wiring with 1 x 5 A socket Controlled by 1 x 5A Switch with face plate & surface including all terminations with circuits from MCB DB ( RAW POWER )

4 sq mm Primary power point wiring upto 6 m length with 1x6/16 a universal socket Controlled by 1 x 16 A Switch with face plate & surface enclosure including all terminations with circuits from MCB DB ( RAW POWER )

Fan wiring controlling from local switch board with 6A switch

4 sqmm x 2 wire + 1x2.5wire (each) Primary power point wiring controlled from MCB DB ( RAW POWER )

2.5 sqmm x 2 wire +1x1.5 wire (earth) Primary power point wiring controlled from MCB DB ( RAW POWER )

SITC 20 w, 6500K, 2100 lm cool day led tubelight ( quote to be considered make Philips/bajaj/havells or equivalent)

SITC 5 w, 6500 k, 825 lm led bulb ( quote to be considered make Philips.bajaj/havells or equivalent)

SITC of ceiling fan 1200 mm, standard model ( make usa/havells/orient or equivalent)

SITC of exhaust fan 225mm ( make orient/Crompton/havells or equivalent)

SITC with end termination 10A SPN MCB

SITC of 15 ltr geyser ( electric water heater) )make havells/venus/bajaj/ramson/racold/Vguard or equivalent )

SITC OF mcb db ( MAKE abb/Schneider/MF/legrand, hanger, crabtree or equivalent )

SITC of inverter 1400 VA/240V sine wave

SITC of 32a spn CHANGEOVER OF 240V grade. ( make HPL/GECO/ANCHOR or equivalent )

Niranjan Saikia

CHANDRAMONI HAZARIKA