REPAIR / MAINT TO CI/DI RISING MAIN PUMPING LINES,CONTROL VALVE, NRVS CONTROL PANELS AND CERTAIN MISC WORK ALL AREA, CQA(V)/DAD AREA UNDER GE(S) AHMEDNAGAR

Amount

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation, laying of pipe, cables or for shafts, wells cesspits,man holes, sluice valves etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

All as per serial item No 1 but in hard /dense soil.

Returning, filling, in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed.

Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed.

M&L for cutting the existing bituminous road / PCC Hard Standing upto 75cm in depth, 60cm in width and getting out excavated materials, making good the damaged portion after laying of pipes by returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick and PCC 1:2:4 type B1 using 20mm graded stone aggregate upto 30cm depth from top of the road all as specified and directed.

M&L for repairs / rectification of leakages of existing GI tubing 15mm bore, laid in trenches, floors or on wall, roof by replacing new fittings such as Union, Sockets, nipples, tees, elbows, reducers etc including threading, cutting, jointing complete all as specified and directed for the following sizes:-

All as per serial item No 6 here-in-before but for 20mm bore.

All as per serial item No 6 here-in-before but for 25mm bore.

All as per serial item No 6 here-in-before but for 40mm bore.

All as per serial item No 6 here-in-before but for 50mm bore.

Taking up or down 15mm bore dia steel water tubing and connections etc including cleaning for re-fixing if required complete all as specified and as directed.

All as per serial item No 11 but 20mm bore dia.

All as per serial item No 11 but 25mm bore dia.

All as per serial item No 11 but 40-50mm bore dia.

All as per serial item No 11 but 80 mm bore dia.

All as per serial item No 11 but 100 mm bore dia.

Refixing old steel tubing, 15mm bore dia, retrived from item no.11 and connections in new or old position including cleaning, removing chalkings and refixing same with new GI fittings such as unions, sockets, nipples, tees, elbows, reducers etc on wall, floors, in trench etc complete all as specified and as directed.

All as per serial item No 17 but 20mm bore dia retrived from item no.12

All as per serial item No 17 but 25mm bore dia retrived from item no.13

All as per serial item No 17 but 40 - 50mm bore dia retrived from item no.14

All as per serial item No 17 but 80mm bore dia retrived from item no.15

All as per serial item No 17 but 100mm bore dia retrived from item no.16

M&L for 15mm bore GI tubing, medium grade laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete all as specified and as directed.

All as per serial item No 23 here-in-before but for 20mm bore.

All as per serial item No 23 here-in-before but for 25mm bore.

All as per serial item No 23 here-in-before but for 40mm bore.

All as per serial item No 23 here-in-before but for 50mm bore.

All as per serial item No 23 here-in-before but for 80mm bore.

All as per serial item No 23 here-in-before but for 100mm bore.

M&L for gun metal or bronze globe / ball valve, ISI Marked, screwed both ends suitable for 15mm bore GI tubing with side way operating GI lever handle including taking down old unserviceable valve of any type / make complete all as specified and directed.

All as per serial item No 30 here-in-before but for 20mm bore.

All as per serial item No 30 here-in-before but for 25mm bore.

All as per serial item No 30 here-in-before but for 40mm bore.

All as per serial item No 30 here-in-before but for 50mm bore.

Repairs / rectification of leakages of 80mm bore dia CI/DI Main joint with new lead wool/Run lead/Rubber gasket joint/mechanical joint ,caulking/ nutbolt tight etc. including burning out old leadjoint/dismantling rubber gasket/ nut bolts and including any type of excavation/returning filling (any type of soil strata) etc. and making good all disturbed area to match the surrounding all as specified and as directed.

All as per serial item No 35 here-in-before but 100mm bore dia.

All as per serial item No 35 here-in-before but 150mm bore dia.

All as per serial item No 35 here-in-before but 200mm bore dia.

All as per serial item No 35 here-in-before but 250mm bore dia.

All as per serial item No 35 here-in-before but 300mm bore dia.

All as per serial item No 35 here-in-before but 600mm bore dia.

Taking up or down choked CI/DI water mains 80 mm bore including all fittings with spigot and socket ends including burning out joints, recovering lead and proper cleaning by internal brushing, removing chalkings and refixing / relaying in place, jointing, pressure testing and washing out complete all as specified and as directed. Note : Run lead joint/rubber gasket joint will be measured and paid seperately

All as per serial item No 42 here-in-before but for 100 mm bore.

All as per serial item No 42 here-in-before but for 150 mm bore.

All as per serial item No 42 here-in-before but for 200 mm bore.

All as per serial item No 42 here-in-before but for 250 mm bore.

All as per serial item No 42 here-in-before but for 300 mm bore.

All as per serial item No 42 here-in-before but for 600 mm bore.

M&L for 80 mm bore cast iron pipe with spigot and socket ends, centrifugally cast, class LA, suitable for rubber gasket joint, conforming to IS: 1536-1976, ISI marked, in any length laid in trenches, pressure testing, washing out complete including dismantling, taking out old corroded pipe line including all fittings complete all as specified and as directed.

All as per serial item No 49 here-in-before but for 100 mm bore.

All as per serial item No 49 here-in-before but for 150 mm bore.

All as per serial item No 49 here-in-before but for 200 mm bore.

All as per serial item No 49 here-in-before but for 250 mm bore.

All as per serial item No 49 here-in-before but for 300 mm bore.

M&L for DN 80 mm bore ductile Iron pipe with spigot and socket ends, centrifugally cast, class DI-K9, with finishing layer of bituminous coating as per annex C of IS 8329, including rubber gasket joint, conforming to IS: 8329 : 2000, ISI marked, in any length, laid in trenches, pressure testing, washing out complete including dismantling, taking out old corroded pipe line with all fittings complete all as specified and as directed.

All as per serial item No 55 here-in-before but for 100 mm bore.

All as per serial item No 55 here-in-before but for 150 mm bore.

All as per serial item No 55 here-in-before but for 200 mm bore.

All as per serial item No 55 here-in-before but for 250 mm bore.

All as per serial item No 55 here-in-before but for 300 mm bore.

All as per serial item No 55 here-in-before but for 600 mm bore.

M&L for styrene butadiene rubber gasket (IS : 5382) joint, suitable for 80 mm bore spigot and socket ends DI Pipes, Class K9, including pressure testing complete all as specified and as directed.

All as per serial item No 62 here-in-before but for 100 mm bore DI pipe.

All as per serial item No 62 here-in-before but for 150 mm bore DI pipe.

All as per serial item No 62 here-in-before but for 200 mm bore DI pipe.

All as per serial item No 62 here-in-before but for 250 mm bore DI pipe.

All as per serial item No 62 here-in-before but for 300 mm bore DI pipe.

All as per serial item No 62 here-in-before but for 600 mm bore DI pipe.

M&L for CI / DI fittings and specials such as Bends (any type, radius and angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc.), Tee pieces single branch, "Y" junction, double branch, cross (all sockets or socket and spigot), Collars, Caps, Plugs, Connecting pieces one end flanged and other end socketed or spigot ends or all socketed / spigot ends etc, suitable upto 150 mm bore pipe complete all as specified and as directed.

All as per serial item No 69 here-in-before but for 200 to 600 mm bore pipe.

M&L for run lead joints suitable for 100mm bore dia pipe, spigot and socket ends complete and pressure testing all as specified and as directed.

All as per serial item No 71 here-in-before but for 150 mm bore pipe.

All as per serial item No 71 here-in-before but for 200 mm bore pipe.

All as per serial item No 71 here-in-before but for 250 mm bore pipe.

All as per serial item No 71 here-in-before but for 300 mm bore pipe.

M&L for taking out 80mm bore leakaged sluice valve, repair/replaceing grafite Grease gland rope, nuts, bolts, washers etc.all as specified and as directed.

All as per serial item No 77 here-in-before but 100 mm bore.

All as per serial item No 76 here-in-before but 150 mm bore.

All as per serial item No 76 here-in-before but 200 mm bore.

All as per serial item No 76 here-in-before but 250 mm bore.

All as per serial item No 76 here-in-before but 300 mm bore.

All as per serial item No 76 here-in-before but 600 mm bore.

M&L for taking out sluice valves of size 80 mm bore, re-facing, re-grinding, repacking stuffing box of sluice valve spindle of any make any type, including taking apart and reassembling, re-fixing, replacing nuts, bolts, washers complete all as specified and as directed.

All as per serial item No 83 here-in-before but 100 mm bore.

All as per serial item No 83 here-in-before but 150 mm bore.

All as per serial item No 83 here-in-before but 200 mm bore.

All as per serial item No 83 here-in-before but 250 mm bore.

All as per serial item No 83 here-in-before but 300 mm bore.

M&L for rising spindle sluice valve of size 80 mm bore, cast iron, long body, both ends flanged as per IS-14846 and drilled with stainless steel spindle iron wheel head and as per pressure rating PN 1.6, Class I, ISI Marked alongwith nuts, bolts, washers , gaskets etc. including dismantling and taking out old unserviceable sluice valve from valve chamber / trenches complete all as specified and as directed.

All as per serial item No 89 here-in-before but 100 mm bore.

All as per serial item No 89 here-in-before but 150 mm bore.

All as per serial item No 89 here-in-before but 200 mm bore.

All as per serial item No 89 here-in-before but 250 mm bore.

All as per serial item No 89 here-in-before but 300 mm bore.

M&L for 80 mm bore size non return valve, cast iron body, flanged end, including neophrene ball and by pass arrangement complete including suitable flanges, nuts, bolts, washers and rubbber gaskets including dismantling and taking down old unserviceable non return valve all as specified and as directed.

All as per serial item No 95 here-in-before but 100 mm bore.

All as per serial item No 95 here-in-before but 150 mm bore.

All as per serial item No 95 here-in-before but 200 mm bore.

S&F cast iron foot valve of 80mm size, including taking down old unserviceable foot valve all as specified & as directed.

All as per serial item No 99 here-in-before but 100 mm size.

All as per serial item No 99 here-in-before but 150 mm size.

All as per serial item No 99 here-in-before but 200 mm size.

M&L for mechanical joint having 2 Nos CI / DI Sockets, 1 No CI / DI Collar and 2 Nos styrene butadiene rubber gaskets for 80 mm bore pipe alongwith nuts, bolts, washers , gaskets etc. including cutting CI / DI pipe and reducing to required length for insertion in position of mechanical joint complete all as specified and directed.

All as per serial item No 103 here-in-before but for 100 mm bore pipe.

All as per serial item No 103 here-in-before but for 150 mm bore pipe.

All as per serial item No 103 here-in-before but for 200 mm bore pipe.

All as per serial item No 103 here-in-before but for 250 mm bore pipe.

All as per serial item No 103 here-in-before but for 300 mm bore pipe.

All as per serial item No 103 here-in-before but for 600 mm bore pipe.

M&L for construction of valve pit/chamber of Internal dimensions 1300 mm x 1300 mm x 1300 mm, using PCC 1:4:8, type D-2, using 40mm graded stone aggregates for foundation, 23 cm thick, brick wall built in cement mortar (1:4) ,15 mm thick rendering all around the brick work in cement mortar (1:6), 75 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregates in coping including necessary form work, 3coats of white wash on rendered surfaces and on coping, 2 mm thick mild steel top sheet cover with frame made out of 40x40x6 mm angle iron, locking arrangement, including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer including demolition of existing valve chamber and clearing the debris complete all as specified and as directed.

All as per serial item No 110 here-in-before but internal dimensions 1100 mm x 1100 mm x 900 mm

All as per serial item No 110 here-in-before but internal dimensions 900 mm x 900 mm x 900 mm

All as per serial item No 110 here-in-before but internal dimensions 500 mm x 500 mm x 500 mm

All as per serial item No 110 here-in-before but internal dimensions 300 mm x 300 mm x 300 mm

M&L for taking out carefully submersible pump 2 HP to 5 HP from borewell along with HDPE Pipe , cable , clamps and dismantling opening and servicing , by replacing unserviceable parts such as impeller , bushing , thrust bearing waterseal / coupling , etc assembling , installing and testing all as directed by Engineer- in- Charge Note : Only thrust bearing, SS coupling & adopter will be measured and paid separately.

S&F in repairs, thrust bearing suitable for 2 HP To 5 Hp including lathe machine work all as specified and as directed.

S&F in repairs, SS Coupling to connect DE and NDE ends of motor and pumps with locking pins suitable for 2 to 5 HP all as specified and as directed.

S&F in repairs, SS Coupling / adopter, suitable to connect HDPE pipe to pump outlet with MS clips all as specified and as directed.

M&L for copper flexible submersible cable, flat, 3 core, 1100 volts grade, PVC Insulated, 2.5 Sq mm including water proof joint all as specified and as directed.

Dismantling and taking out unserviceable electric sumersible pump set 2 to 5HP capacity from borewell and transportation to and from workshop, for repairing and rewinding with existing size copper wire, winding with insulating material and warnishing heating etc and reassembly installing on existing foundation including proper alignment and testing complete all as specified and directed.

S&F in repairs, DOL starter in sheet steel encloser, water proof, 3 phase, 440 volts, 50Hz, MU G -11 Mode,l fixed to angle iron stand 1.00 mtr above ground level grouted in ground 45 cm with PCC 1:2:4 type B1(using 20mm graded stone aggregates) all as specified and directed.

S&F float valve 20 mm bore, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for Iron or CPVC pipe, ISI Marked, including taking down old unserviceable valve of any type / make complete all as specified and as directed.

Drilling, tapping, cast iron water mains (in position) for branch connection of 15 mm internal dia of GI pipe including excavation and earthwork if required complete all as specified and directed.

All as per serial item No. 123 here-in-before but for GI pipe 20 mm internal dia

BHAVIN INFRA

MS. G.A. CONSTRUCTION

Mangesh Murlidhar Darwade

Takshashila electricals