Estimate for Construction of Inlet on Fatehpur Manianwala Field drain.

Amount

Excavation of Soil using Hydraulic Excavator and hydraulic Tractor Trolly I/C Cutting and loading in Trolly and transporting to the embankment locations with all lifts and leads disposal/carriage from 0 upto 154.17m (19.38)

Extra allowances for scaffolding in tile brick and concrete lining for side slopes only (19.15)

Cement concrete 1:3:6 with stone ballest or shingle mixing by mechnical means using concrete mixer volumetric type (10.12)

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Cold twisted detormed (Ribbed / Tor steel) Bars (Fe 500 Grade as per IS 1786-2008), for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Centering and Shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc.

Shuttering for faces of concrete foundations and foundation beam & plinth beam ( vertical or battering)

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. In ordinary soil mechanical means depth upto 3m

Graded filter

Filling shingle in jharries

Filling stone Boulder into Wire Crates Hand packed including S/O & weaving wire mesh size 150 mm x 150 mm

Dressing of Side Slopes and prepration of sub grade for lining complete in all respect

Dressing of Bed and prepration of sub grade for lining complete in all respect

Running and maintenance of pumping set 8 H.P./ Generator set for dewatering arrangements complete in all respects

Making bore and installation of pumping set for dewatering arrangements complete in all respects

Providing & Fixing ISPL 2478x315x12 in all respects as per dwg & PWD specifications

Providing & Fixing ISPL 2478x380x8 in all respects as per dwg

Providing & Fixing ISPL 2478x315x8 in all respects as per dwg

Providing & Fixing ISPL (SS)2478x100x10 in all respects as per dwg

Providing & Fixing ISPL (SS)2478x100x0 in all respects as per dwg

Providing & Fixing ISPL 2478x40x20 in all respects as per dwg

Providing & Fixing ISPL(SS) 80x8 L=3920 in all respects as per dwg

Providing & Fixing ISPL 350x350x14 in all respects as per dwg

Providing & Fixing J Anchor ⏀16 in all respects as per dwg

Providing & Fixing Anchor ⏀16 in all respects as per dwg

Providing & Fixing J Bolt M20 L=600 in all respects as per dwg

Providing & Fixing J Anchor ⏀16 in all respects as per dwg

Providing & Fixing ISST 200 L=2478 in all respects as per dwg

Providing & Fixing ISMB 200 L = 3920 in all respects as per dwg

Providing & Fixing Skin plate 3900x2400x10 in all respects as per dwg

Providing & Fixing ISMB 200 L=3613 in all respects as per dwg

Providing & Fixing ISMC 200 L = 3613 in all respects as per dwg

Providing & Fixing Plate 2400x160x8 in all respects as per dwg

Providing & Fixing Plate 2400x210x10 in all respects as per dwg

Providing & Fixing Plate 160x150x8 in all respects as per dwg

Providing & Fixing Plate 150x40x15 in all respects as per dwg

Providing & Fixing Plate 40x35x10 in all respects as per dwg

Providing & Fixing & fixing in position of flat/wedge seal including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge.(75 mm dia x 10 mm th.) in all respects as per dwg & PWD specifications

Providing & Fixing Clamp Plate 3370x63x10 in all respects as per dwg & PWD specifications

Providing & Fixing M8 Bolt L=60 in all respects as per dwg & PWD specifications

Providing & Fixing and Fixing of MS Square Bar 25x25x3370 in all respects as per dwg & PWD specifications

Providing & Fixing seal base plate 2330x50x8

Providing & Fixing of hollow bulb seal & fixing in position including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge. (100/44 x 10mm)

Providing & Fixing Clamp Plate 2400x50x8 in all respects as per dwg & PWD specifications

Providing & Fixing M8 Screw CSK L=60 in all respects as per dwg & PWD specifications

Providing & Fixing Plate 210x110x10 in all respects as per dwg & PWD specifications

Lifting Hoist arrangement of 2T Capacity 2 Per Gate (Total Capacity 2x2=4T) in all respects as per dwg & PWD specifications

Providing & Fixing wheel assembly dia 180 wide 50 in all respects as per dwg & PWD specifications

Providing & Fixing Plate OD 120x8 ??r² in all respects as per dwg & PWD specifications

Providing & Fixing Grease Nipple in all respects as per dwg & PWD specifications

Providing & Fixing J Bolt M16 L=640 in all respects as per dwg & PWD specifications

Providing & Fixing Anchor Plate 1000x300x10 in all respects as per dwg & PWD specifications

Providing & Fixing ISMC 200 L = 3800 in all respects as per dwg & PWD specifications

Providing & Fixing SHS 40x40x2.6, L=1660 in all respects as per dwg & PWD specifications

Chequered Plate 750x300x8 in all respects as per dwg & PWD specifications

Providing & Fixing SHS 60x60 L=1000 in all respects as per dwg & PWD specifications

Providing & Fixing GI 50 NB 15000 Long in all respects as per dwg & PWD specifications

Providing & Fixing ISPL 1000x200x10 in all respects as per dwg & PWD specifications

Providing & Fixing SHS 200x200x6 L=2450 in all respects as per dwg & PWD specifications

Providing & Fixing ISPL 350x350x14 in all respects as per dwg & PWD specifications.

Providing & Fixing ISPL 350x200x10 (stiffener) in all respects as per dwg & PWD specifications.

Providing & Fixing ISPL 200x65x10 (stiffener) in all respects as per dwg & PWD specifications.

Stiffener Plate 185x250x6 in all respects as per dwg & PWD specifications

Providing & Fixing ISMB 250x125 L = 1950 in all respects as per dwg & PWD specifications.

Providing & Fixing ISMB 250x125 L = 4200 in all respects as per dwg & PWD specifications.

Providing & Fixing ISMC 200 L = 1800in all respects as per dwg & PWD specifications.

Providing & Fixing Bolt M20 L=120in all respects as per dwg & PWD specifications.

Providing & Fixing Chequered Plate 4150x1900x6 in all respects as per dwg & PWD specifications.

Providing & Fixing ISA 65x65x6 L = 1800 in all respects as per dwg & PWD specifications.

Providing & Fixing ISA 65x65x6 L = 2700 in all respects as per dwg & PWD specifications.

Providing & Fixing ISA 65x65x6 L = 1150 in all respects as per dwg & PWD specifications.

Providing & Fixing GI 50 NB 25000 Long in all respects as per dwg & PWD specifications.

Providing & Fixing ISPL 100x200x8 in all respects as per dwg & PWD specifications.

Providing & Fixing ISMC 200 L = 300* in all respects as per dwg & PWD specifications.

Providing & Fixing ISMC 150 L = 700 in all respects as per dwg & PWD specifications.

Providing & Fixing ISMC 150 L = 2054 in all respects as per dwg & PWD specifications.

Providing & Fixing ISPL 200x200x10 in all respects as per dwg & PWD specifications.

Providing & Fixing ISMC 175 L = 1800 in all respects as per dwg & PWD specifications.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Applying priming coat with metal primer on new steel or iron work including prepration of surface.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Painting two or more coats with anticorrosive bitumastic Paint to give an even shade.

Hire Charges of Machinery Cranes 35 tonnes

BHARAT BHUSHAN CONTRACTOR