REPAIRS TO TOILET AND KITCHEN WITH PLUMBING FITTINGS, ROOF REPAIR AT OFFRS MD OFFRS ACCN AT MANEKSHAW MARG, URBAN VILLAGE AND CASSEL ROAD UNDER GE (EAST) DELHI CANTT-10

Amount

(a) Dismantling of floor of bathroom and removing out the cinder/concrete from sunken protion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditons, grinding any sharp edges etc complete all as specified. b) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (c) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top® Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite. d) M&L for protection plaster 15mm thick in cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified. (e) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall. (f) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed. (g) The area of Each bathroom/toilet portion is n.exc 4.00 Sqm each.

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water complete

S&F 15mm dia bore water tubing , medium grade , galvanised with all fitting laid in trenches/wall including taking down old pipe complete all as specified and directed.

S&F 20 mm dia bore water tubing , medium grade , galvanised with all fitting laid in trenches/wall including taking down old pipe complete all as specified and directed.

S&F 25 mm dia bore water tubing , medium grade , galvanised with all fitting laid in trenches/wall including taking down old pipe complete all as specified and directed.

M&L for taking down old 40 or 50 mm dia bore water tubing and refixing in new or old position complete all as specified and directed.

M&L for coloured non skid ceremic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jounted in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm screed bed in CM 1:6 and dismantling existing old flooring/tile complete all as specified and directed.

M&L for glazed coloured ceremic tiles sizes 600x300x 7mm thk tiles on vertical surfaces , such as skirting/dado ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 10mm thick rendering in CM 1:4 and dismantling existing old tiling complete all as specified and directed.

M&L for Vitrified Ceramic Coloured tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles n exceeding 0.36sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles over and incl 15mm thick screed bed in CM 1:6 and dismantling existing old flooring/tile complete all as specified

M&L CPVC pipes of pressure rating 10kgf/sqcm, cutting chases with electric operated diamond blade cutter by highly skilled pipe fitters,removal/replacement of existing water supply tubing for addition and alteration incl screwing existing tubing for in position with or without taking down for 15-20 mm size pipe, jointing using weld solvent system as per manufactures with all necessary brass threaded fittings of the similar make, making good the existing finishes complete. Make- Finolex, Tirupati, Astral

S&F in repairs CP brass WHB mixer for mixing hot & Cold water screwed down for iron pipe 15mm bore complete all as specified and directed.

S&F in repairs CP brass wall mixer 3 in 1 (having leg/bend/arrangement for connection to shower) for mixing hot & Cold water screwed down for iron pipe 15mm bore complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan ( pedestal pattern) , white, complete all as specified and directed.

S&F in repair Plastic water closet seat, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair10ltrs PVC valveless, syphonic ac-tion type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair PVC connection 15mm sizes with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repair waste fitting 32mm dia , CP for WHB/Sink with long screwed shunks and nuts complete all as spd and directed

S&F in repair PVC waste pipe 32mm dia 60 cm long suitable for WHB/Sink complete

S&F in repair sheet glass shelf assembly consisting of 5.5mm thk sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair 125 mm size Brass chromium plated shower rose suitable for 15 mm bore pipe complete all as specified and directed.

S&F in repairs 15mm dia bib taps fancy type , CP cast copper alloy with crutch or butterfly handle screwed down , screwed for iron pipe or brass ferrule fancy type complete all as specified and directed.

S&F in repair 15mm bore angle stop valve chromium plated brass with flange complete all as spd & directed

S&F in repair 15mm bore 2 way bib tap chromium plated brass with flange complete all as spd & directed

S&F in repair Toilet paper holder SS fixed to walls with chromium plated (CP) brass screws complete all as spd & directed

S&F in repair corner glass shelf 225x225mm radius consisting of 5.5mm thk sheet glass with CP brass brackets with 02 Nos of CP railing in each set complete all as spd

S&F CP health faucet with 1.00mtr long CP flexible pipe as per approved samplecomplete all as spd and directed

S&F in repair CP , tubular towel rail 60cm long fixed with and including CP brass screws and wooden /plastic cleats complete

S&F in repair CP brass towel ring round with round flange fixed with screw to wall complete

S&F in repair grating doom 100mm dia of PTMT complete.

S&F in repair CP brass soap dish fixed to plugs with chromium plated brass screws in position complete all as specified complete.

S&F in repair Bib taps standard of PTMT any colour screwed, for iron pipe 15mm bore and fixed ( Minimum weight 15 mm- 90 gms)

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed

M&L for two coats of oil emultion distemper on new plaster surfaces of wall over one coat of primer and 1mm thick oil putty including prepration of surface complete.

M&L for applying two coats of oil emultion distemper over one coat of primer and 1mm thick oil putty on old surfaces of wall incl complete removal of existing treatment complete all as specified and directed.

S&F in repairs stainless steel kitchen sink with draining board made of 1mm thick sheet for kitchen with plug washers wate pipe cast iron canti lever bracket ovre all size overall size 915mmx 460mm bowl size 410 mmx 330 mmx 160mm complete all as specified and directed. Make- Maharaja/Nirali/Prayag

S&F in repair stainless steel kitchen plate rack size 750 x 900x250 mm deep made out of 1mm thick sheet including fitting arrangement complete. Make- Maharaja/Nirali/Prayag

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms, dado/wall and like in over and incl 15mm thick cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

M&L providing scaffolding system on the exterior side, upto eight storey height made with MS tube stiffened with suitable bracing, runners connecting with the building for making working platform upto requisite height and required location with essential safety measures for the workman etc. complete as per direction and approval of Engr-in-charge.The elevated area only of the scaffolding shall be measured for payment purpose.

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed

Taking down shutters of any description exc 1.00 sqm & nexc 2 sqm each.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete as specified and directed

S &F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F butt hinge 100 mm extruded aluminium alloy with galvanised mild steel pin anodised.

S&F 150mm long aluminum anodized barrel tower bolt of cast aluminiun alloy section and fixed all as spd and directed.

S&F Aluminium handles, 150mm size cast type anodised complete all as specified and directed

M&L taking down existing celing any type and any description and provn of E-board 4mmthick self design type tiles ceiling on GI Powder coated channel/Tee/Grid of make(Armstrong or equivalent) frame work with the following specification including cutting holes to brick wall built in cement mortar & making good in cm 1:3 of cement concrete 1:2:4 type BO as required :- (a) Plugging to wall around the rooms & supplying & fixing GI Powder coated angle of size 25x25x1.0 mm (b) S&F of 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling dash free fasterers (c) S&F 25 x25 x1.5mm GI Powder coated tee as in main & cross members at 595mm c/c supported suspenders alongwith adjustable clamp to maintain level . (d) S&F E-board 4mmthick self design type ceiling tiles of size 595mm x 595mm confirming to relevant IS in squares of GI Powder coated Tee with clips made to shape. Shade and pattern of E- board shall be as approved by GE

S&F in repair 18/19 mm veenered paticle board solid core, interior grade, with prelaminated both sides with decorative choice laminations as in shelf, drowers, cupboard, partition including wooden/PVC lipping/beading on expose edges as required etc as directed by Engr-in-Charge

S&F Continuous (piano) hinges width of flaps 40mm when open, mild steel, bright finish or electro galvanised incl fixing with welding or screws complete.

S&F 100mm Brass handle, cast type, polished bright complete all as specified and directed

Demolition of Concrete (unreinforced) in other than ground floors n exc 15 cm thickness as in PCC pading /tank staging etc complete all as specified and directed.

M&L cutting out cracks to V-section in existing roofs or terracing surfaces, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight), complete all as specified and as directed.

Wire brushing and cleaning top surface of tiles, cement concrete, including flashings and junction of parapets including taking out old APP membrane/grass roots/vegetation etc., from existing roof surfaces and cleaning the surface after drying from dirt, mortar, dust mortar buds, algae and all other foreign matter and brushed and wiped, complete all as specified and as directed.

M&L for providing cement concrete type 1:2:4 type B-0(12.5 mm graded agg ) as in roof kerbs or mud stops, filling of hold fasts and door frames, rounded or chamfered on edges complete all as specified.

M&L PCC 1:3:6 type C1 with 20 mm graded stone aggregate as in padding over roof slab for making slope on roof top surface finished even and smooth complete all as specified and directed.

M&L for 10 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding) with WPC (WPC shall be measured and paid separately)

Supply only liquid water proofing compound and mixed as per manufacturer's instructions, complete all as specified and as directed.

M&L Applying evenly a coat of bituminous primer conforming to IS- 3384 @ 0.30Ltr/Sqm, over the primed surface, apply a coat of hot blown 85/25 penetration grade bitumen conforming to IS- 702 @ 1.2 Kg/Sqm of the surface area, applying APP based polymeric membrane minimum weight 3.50kg/Sqm and of minimum thickness 3mm, reinforced with polyster non woven fabric ( weight not less than 150gm/Sqm ). APP membrane will be laid by torching overlaps with a propane or butane gastorch and laid across the slope from lowest line of roof towards ridge with over laps of 75mm in length side and 100mm on the width side of membrane bonded with hot blown bitumen and applying one coat of aluminum paint. (Note : Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Ten years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.

S&F in repair PVC (SWR) pipes, 110mm external dia single socketed in any length with rubber joints, fixed to walls with PVC brackets/ clips/ clamps etc complete all as specified.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge.

Supply and fabrication of kitchen cupboards, shelf, shutter, partition etc made up of 18mm HDHMR board (Century/ Action Tesa/Kitply) with both side company pasted lamination (any colour) duly lipping (edge bending) on exposed surfaces complete with G profile handle of approved colour (01 No for each shutter) and soft closing hinges (02 Nos in each shutter) (Hettich/ Godrej/ IPSA) incl dismantling existing unserviceable boarding and thrown away from MOD area complete.

M&L stainless steel Cutlary basket of size 370mm x 485mm x 100mm made of min 4mm dia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part no 6132 or equivalent approved by Engr-in-Charge.

M&L stainless steel thali basket of size 370mm x 485mm x 200mm made of min 4mm dia stainless steel wire of approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/ 20inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. Make: Godrej Cat part No 6136 or equivalent approved by Engr-in-Charge.

M&L stainless steel basket (plain) of size 370mm x 485mm x 150mm made of min 4mm dia stainless steel wire approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/ 20inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 6121 or equivalent approved by Engr-in-Charge).

S&F in repair 20 mm bore gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed

S&F in repair 25 mm bore gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed

S&F in repair 40 mm bore gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed

S&F Rotational moulded polyethylene Water Storage Tanks 5000 ltrs capacity (cylindrical vertical with closed top) hoisted including threaded type lid and fixed in position including dismantling existing water tank complete all as specified .(Note- Tank to be fixed in multistorey bldg with occupants within few hours and necessary T&P, scaffoling etc required shall be deemed to be included in unit Quoted rate).

imran construction company

Vipul Construction

A R construction

Akhil Enterprises

POONAM ENTERPRISES

DEV CONSTRUCTION