REWEAVING/RECANNING OF FURNITURE OF

Amount

CHAIR VERANDAH FD-19(M),256,359

S&F in replacement MS conduit pipe 20 mm dia incl welding to cracked joints of chairs, complete all as shown in drawing and as directed.

Removing of old/ worn out cane plastic and old paint by using different type of abrasive emery paper, painting of chair frame with synthetic enamel white paint and recanning in mat pattern with new 4mm half round cane plastic white in colour, made of superior quality plastic with provn of PVC shoe in legs(set of 4 in one chair) all as per drawing/directed by Engineer-in-charge.

CHAIR CB STEEL TUBULAR WITH ARMS FD-75(M), 386

S&F in replacement cleat of MS flat iron support 20mm x 60mm x 3mm fix in chair CB steel under seat frame with welding and painting neatly with two coat of synthetic enamel paint olive green/smoke grey/as approved by GE over a coat of primer complete all as directed.

Painting of chair frame with two coat of synthetic enamel paint olive green/smoke grey/black/as approved by GE complete all as directed by Engineer-in-charge.

S&F in repalcement seat made of of second class hard wood polished in teakwood/mahogany/colour as approved by GE and duly weaving as specified in drawing with white cane half rounded of approved quality and fixed with suitable MS nuts, bolt and washer all as shown on drawing and as directed.

All as per Srl item No 2.03 above but for back of chair

S&F in replacement arms rest made to shape and size of chair made of 2nd class hard wood duly painted as approved by GE and fixed with MS screw, complete all as shown on drawing and as directed.

CHAIR CB STEEL TUBULAR WITHOUT ARMS FD-75(M)

S&F in replacement cleat of MS flat iron support 20mm x 60mm x 3mm fix in chair CB steel under seat frame with welding and painting neatly with two coat of synthetic enamel olive green/smoke grey/as approved by GE paint over a coat of primer complete all as directed.

Painting of chair frame with two coat of synthetic enamel paint olive green /smoke grey/as approved by GE complete all as directed by Engineer-in-charge.

S&F in replacement seat made of of 2nd class hard wood polished in teakwood/mahogany/colour as approved by GE and duly weaving as specified in drawing with white cane half rounded of approved quality and fixed with suitable MS nuts, bolt and washer all as shown on drawing and as directed.

All as per Srl item No 3.03 above but for back of chair.

CHAIR DINING FD-203,228,279,1105

S&F in replacement front leg, made out of Ist class teak wood duly shaped as per drg to match with existing parts of chair complete all as shown in drg.

All as per Srl item No 4.01 above but rear leg.

All as per Srl item No 4.01 above but stiffner of back rest.

All as per Srl item No 4.01 above but front/rear/side rails.

All as per Srl item No 4.01 above but bottom stiffners.

S&F Hard PVC shoes under the legs complete all as specified and directed

Removing of old canning and Re-canning of chair dining with new plastic cane of ½ round 2.0mm wide 0.40mm thick, woven in godrej pattern and border with 4mm wide cane of approved quality complete all as per drawing.

Scratching the entire wooden pallets with electric grinder, filling putty to the bore holes making surface smooth by scratching it with different type of sand emery paper and shall be french polished with high gloss finish after properly cleaning and smotthing the surface, complete all as specified and as directed.

CHAIR WRITING FD-250,280

S&F in replacement front leg, made out of Ist class teak wood duly shaped as per drg to match with existing parts of chair complete all as shown in drg.

All as per Srl item No 5.01 above but rear leg.

All as per Srl item No 5.01 above but stiffner of back rest.

All as per Srl item No 5.01 above but front/rear/side rails.

All as per Srl item No 5.01 above but bottom stiffners.

All as per Srl item No 5.01 above but arm rest.

S&F Hard PVC shoes under the legs complete all as specified and directed

Removing of old canning and Re-canning of chair with new plastic cane of ½ round 2.0mm wide 0.40mm thick, woven in godrej pattern and border with 4mm wide cane of approved quality complete all as per drawing.

Scratching the entire wooden pallets with electric grinder, filling putty to the bore holes making surface smooth by scratching it with different type of sand emery paper and shall be french polished with high gloss finish after properly cleaning and smoothing the surface, complete all as specified and as directed.

CHAIR EASY FD-201,229, 1108

S&F in replacement front leg, made out of Ist class teak wood duly shaped as per drg to match with existing parts of chair complete all as shown in drg.

All as per Srl item No 6.01 above but rear leg of chair

All as per Srl item No 6.01 above but front/rear rails of seat frame of chair

All as per Srl item No 6.01 above but top/bottom rails of back frame of chair.

All as per Srl item No 6.01 above but side rails of seat frame of chair.

All as per Srl item No 6.01 above but side rails of back frame of chair.

All as per Srl item No 6.01 above but bottom support stiffners of seat frame of chair.

All as per Srl item No 6.01 above but arm rest of chair.

S&F new Hard PVC shoes under the legs of chair.

Removing of old canning and Re-canning of chair with new plastic cane of ½ round 2.0mm wide 0.40mm thick, woven in godrej pattern and border with 4mm wide cane of approved quality. complete all as per drawing.

Scratching the entire wooden pallets with electric grinder, filling putty to the bore holes making surface smooth by scratching it with different type of sand emery paper and shall be french polished with high gloss finish after properly cleaning and smotthing the surface, complete all as specified and as directed.

STOOL DRESSING CB FD-27 (M),252, 282

S& in replacement long rail, made out of Ist class teak wood duly shaped as per drg to match with existing parts of chair. complete all as shown in drg.

All as per Srl item No 7.01 above but short rail.

All as per Srl item No 7.01 above but leg.

All as per Srl item No 7.01 above but bottom stiffner.

Removing of old canning and Re-canning of stool with new plastic cane of ½ round 2.0mm wide 0.40mm thick, woven in godrej pattern and border with 4mm wide cane of approved quality complete all as per drawing.

Scratching the entire wooden pallets with electric grinder, filling putty to the bore holes making surface smooth by scratching it with different type of sand emery paper and shall be french polished with high gloss finish after properly cleaning and smotthing the surface, complete all as specified and as directed.

BIN SOILED LINEN FD-70 (M), 212, 244

S&F in replacement long rail, made out of Ist class teak wood duly shaped as per drg to match with existing parts of chair. complete all as shown in drg.

All as per Srl item No 8.01 above but short rail.

All as per Srl item No 8.01 above but leg.

Removing of old canning and Re-canning of bin with new plastic cane of ½ round 2.0mm wide 0.40mm thick, woven in godrej pattern and border with 4mm wide cane of approved quality. complete all as per drawing.

Scratching the entire wooden pallets with electric grinder, filling putty to the bore holes making surface smooth by scratching it with different type of sand emery paper and shall be french polished with high gloss finish after properly cleaning and smotthing the surface, complete all as specified and as directed.

CHAIR VISITOR /CONFERENCE (TP)

Replacement of old worn-out fabric/rexine from the existing chair and replacing it with new rexine , the colour texture and shed of rexine shall be got approved from GE. complete all as specified or as directed.

S&F in replacement seat and back made of PU foam 50 mm of 50 density duly fixed on plywood and upholsterd with rexine (Approved colour and shade) complete all as per drg.

S&F in replacement arm rest all as specified and as directed by Engineer -in-charge.

M&L for spot welding (not exceeding one inch) of steel items incl scraping, preparing surface of welded portion, grinding as directed.

Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling with putty, painting on steel parts over a coat of red oxide primer and polishing on wooden parts as specefied on drg and as directed at site.

CHAIR CBA STEEL SPECIAL WITH HAND REST FD-120 ,SIMILAR PATTERN

Complete seat frame with canning as per drg.

Complete back frame with canning as per drg.

Hand rest as per drg.

PVC Rings/Rubber shoes as per drg

Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling with putty, painting on steel parts over a coat of red oxide primer and polishing on wooden parts as specefied on drg and as directed at site.

M&L for spot welding (not exceeding one inch) of steel items incl scraping, preparing surface of welded portion, grinding as directed.

CHAIR DINING JCO/ORS FD/MAP-II/05

S&F in replacement PVC seat complete all as per drawing. Make:Amko & equivalent make as approved by GE

S&F in replacement rear leg made of Ist class teakwoodduly shaped as per drg to match with existing part complete all as per drawing.

All as per Srl item No 11.02 above but front leg.

All as per Srl item No 11.02 above but stiffner of back rest.

All as per Srl item No 11.02 above but bottom stiffner.

All as per Srl item No 11.02 above but front/rear/side rails.

S&F new Hard PVC shoes under the legs.

BOOK SHELF OPEN LARGE/SMALL/BOOK CASE (DB-4121,FD-45,SIMILAR PATTERN)

Scratching the entire wooden pallets with electric grinder, filling putty to the bore holes making surface smooth by scratching it with different type of sand emery papers, the item shall be french polished/melamine polish with high gloss finish after properly cleaning and smotthing the surface, complete all as specified and as directed.

TABLE BEDSIDE (HFD-2005,SIMILAR PATTERN)

S&F in replacement lock of drawer with duplicate keys of make : Harrison/ Godrej/ Link complete all as per drg.

S&F in replacement wheel castor all as per drg.

Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling with putty, painting over a coat of red oxide primer, colour as approved by GE and all as directed.

BED FOWLER STEAD (HFD-2002,SIMILAR PATTERN)

S&F in replacement wheel castor all as per drg.

Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling with putty, painting over a coat of red oxide primer as directed.

TV TROLLEY (FD/E6/MAP/04(R (

S&F in replacement top made of pre-laminated particle board exterior grade with one side teak faced and other white face of size 18/19mm thick including 4mm thick teak wood edging all around. complete all as shown on drawing and as directed. Make:Century ply/ Archid Ply/ Action Tesa

All as per Srl item No 15.01 above but one door of TV trolley as per drg.

All as per Srl item No 15.01 above but bottom of TV trolley as per drg.

All as per Srl item No 15.01 above but sides of TV trolley as per drg.

All as per Srl item No 15.01 above but back of TV trolley as per drg.

S&F in replacement wheel castor all as per drg.

CHAIR EASY CUSHIONED (FD-358,SIMILARTTERN)

Replacement of old worn-out fabric/rexine, replacing it with new rexine on seat & back, the colour texture and shed of rexine shall be got approved from GE, complete all as specified or as directed.

S&F in replacement seat and back made of PU foam 50 mm of 50 density duly fixed and upholsterd with rexine (Approved colour and shade) complete all as per drg.

Scratching the entire wooden pallets with electric grinder, filling putty to the bore holes making surface smooth by scratching it with different type of sand emery papers, the item shall be french polished with high gloss finish after properly cleaning and smotthing the surface, complete all as specified and as directed.

FMN SET OF CHARPOY GI PIPE (FD-220,SIMILAR PATTERN)

Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling with putty, painting over a coat of red oxide primer as directed.

CHAIR VERANDAH FD/MAP-II/06

M&L for spray painting of synthetic enamel paint (colour shade as approved by GE) over a coat of red oxide primer after preparation of surface by scrapping with sand paper/electric grinder, removing dust including denting and welding to cracked joints of chairs verandah. complete all as shown on drawing and as directed.

S&F in replacement MS conduit pipe 20 mm dia, complete all as shown in drawing and as directed.

S&F new PVC seat of best quality. Make -Amko/ equivalent

S&F new PVC back of best quality. Make - Amko / equivalent

S&F new hard rubber shoe of best quality, as specified and as shown on drg.

CHAIR COMPUTER FD/E6/MAP/01

Replacement of old worn-out fabric/cloth from the existing chair and replacing it with new fabric/cloth, the colour texture and shed of fabric shall be got approved from GE complete all as specified or as directed.

Taking out old U/s seat and back of chair and S&F new seat and back made of PU foam 50 mm of 50 density duly fixed on plywood and upholsterd with fabric (colour shade as approved by GE) complete all as per drg.

S&F in replacement wheel casters and S&F twin wheel castors, complete all as shown in drawing and as directed.

S&F in replacement tilting /gas lifting mechanism complete all as specified or as directed.

S&F in replacement armrest made of polyurethane, all as spacified and as directed.

S&F in replacement PVC base of best quality all as specified or as directed.

CHAIR WRITING MAP STEEL FD/E6/MAP/12,SIMILAR PATTERN

Replacement of old worn-out fabric/cloth from the seat & back of existing chair writing steel and replacing it with new fabric/cloth, the colour texture and shed of fabric shall be got approved from GE, complete all as per drg.

S&F in replacement seat and back of chair writing steel and S&F new seat and back made of PU foam 50mm of 50 density duly fixed on plywood and upholsterd with fabric (colour shade as approved by GE) complete all as per drg.

S&F new armrest made of polyurethane and shall be reinforced with MS insert, all as per drg and directed by Engr-in-charge.

M&L for welding of all broken joint of mild steel tubular surface, all joint fixing shall be done in accordance with standard workmanship and specification as directed by Engr-in-charge.

S&F in replacement PVC stopper of best quality.

M&L for spray painting of synthetic enamel paint (colour shade as approved by GE) over a coat of red oxide primer after preparation of surface by scrapping with sand paper/Electric grinder, removing dust including denting as required all as specified and directed by Engr-in Charge.

CHAIR REVOLVING EXECUTIVE/LONG BACK (TP)

Replacement of old worn-out fabric/cloth/rexine from the seat & back of existing chair and replacing it with new rexine, the colour texture and shed of rexine shall be got approved from GE, complete all as specified or as directed.

S&F in replacement seat and back made of PU foam 50 mm of 50 density duly fixed on plywood and upholsterd with rexine, as approved colour and shade complete all as per drg.

S&F in replacement wheel casters and S&F new twin wheel castors, complete all as shown in drawing and as directed.

S&F in replacement tilting /gas lifting mechanism complete all as specified or as directed.

S&F in replacement armrest made of polyurethane, all as specified and as directed.

S&F in replacement PVC base of best quality all as specified or as directed.

CHAIR SCHOOL WITH HAND REST FD/E6/MAP/05

Welding of broken joints and denting of all irregular shapes at all side to make correct shape and size all as per drg.

Removing old unserviceable PVC seat and S&F new PVC seat of best quality as approved by GE all as specified and shown on drg.

S&F in replacement hand rest top openable fixed on right hand side all as per drg.

S&F in replacement shelf below the seat all as specified on drg.

M&L for spray painting of synthetic enamel paint (colour shade as approved by GE) over a coat of red oxide primer after preparation of surface by scrapping with sand paper/electric grinder, removing dust including denting as required all as specified and directed by Engr-in Charge.

S&F hard rubber shoe of best quality, as specified and as shown on drg.

dipangashu barick and associates

HINDUSTAN ENGINEERING WORKS