Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.6 LAccepted-AOC MADHUBANI BAZAR PURNEA PO PARORA PS K NAGAR PURNEA BIHAR | PURNEA | PURNEA | BIHAR | 854301 | L1 | Accepted-AOC QUOATED AMOUNT IS REASONABLE AND FOUND L1 BIDDER | |
| 2 | L2₹17.9 L+₹29,280 (1.66%)Rejected-Finance | L2 | Rejected-Finance QUOTED AMOUNT IS HIGHER THAN L1 BIDDER | |
| 3 | L3₹21.4 L+₹3.8 L (21.2%)Rejected-Finance | L3 | Rejected-Finance QUOTED AMOUNT IS HIGHER THAN L1 BIDDER |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
2 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
ARVIND KUMAR SHARMA, SE, CWE (AF) PANAGARH
HQ CWE AF PANAGARH MILITARY ENGINEER SERVICES AIR FORCE STATION ARJAN SINGH PO BIRUDIAH DIST BURDWAN WEST BENGAL PIN 713148
REPAIR BITUMINOUS CARPETING ALONGWITH POTHOLES AT CERTAIN PLACES IN DOMESTIC AND TECH AREA AT AF STATION PURNEA UNDER GE (AF) PURNEA
2022_MES_568064_1
82382/PUR/E8
Open Tender
Civil Works - Roads
Item Rate
180 days
GE AF PURNEA
PLEASE REFER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE AF PURNEA
₹40,000
Yes
31 Jan 2023
8 Dec 2022
10 Jan 2023
8 Dec 2022
2 Jan 2023
15 Dec 2022
9 Dec 2022 - 12 Dec 2022
Amount
Material & Labour for repairs to pot holes of not exc. 30mm depth, and n.exc. 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc., cutting around edges to at least 25mm in depth and making good by applying tack coat with bituminous primer at 5kg per 10 sqm using paving bitumen VG-10 grade , putting in premix bituminous macadam, well rammed and sealed with binder using paving bitumen VG-30 grade @ 6.8 kg per 10 sqm blended with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of pre-mixed macadam, binder and chippings) complete all as specified and directed by Engineer-in-Charge.
Material & Labour preparation of old bituminous/ black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and as directed by Engineer-in-Charge.
Material & Labour applying evenly a priming / tack coat with bituminous primer @ 5 kg per 10 sqm with paving bitumen (grade VG 10) complete all as specified and directed by Engineer-in-Charge.
Material & Labour bituminous premix semi-dense asphaltic concrete 40mm consolidated thickness with 5.5 % binder (paving bitumen (grade VG 30) content by weight of total mix, spread evenly with mechanical paver to desired thickness and to the correct camber, rolled and compacted to required camber and gradient with 10 to 12 tonne power roller complete all as specified and directed by Engineer-in-Charge. (Notes: 1. Premix SDAC shall be procured from a Hot Mix Plant . 2. Exact quantity of binder to be used shall be ascertained by Design Mix as specified. 3. The binder content in the mix shall be minimum 5.5 % by weight of total mix. However, in case more than 5.5% binder content is required as per design mix, the same shall be provided by the contractor at no extra cost). 4. Binder content and density testing equipment should be readily available at site.
Material & Labour for 2.5 mm thick painting to road surface such as lines dashes, arrows, letter, zebra crossing etc on roads pavements with thermoplastic road marking paint ( make STP or equivalent ) @ 5 kg per Sqm and applying glass grit @ 300gms/sqm over painted surface complete all as specified and directed by Engineer-in-Charge. (Notes: Application will be done with mechanical devices as per manufacture's instruction .)
Material & Labour for dual direction road studs cat eye of impact ABS plastic /polycorbonate studs 100/100 mm having ultra voilet resistance colour (white, yellow & red) with plastic strips connecting to 31 mini retro reflective glass beads of colour (white, yellow & red) to a side provided with steel zinc plated nails of dia 12mm and length 120mm for fixing to road surface by hammering incl taking down old unserviceable studs complete all as specified and directed by Engineer-in-Charge.
MSRAMANUJSINGHSONS
M/S.M.S.Devi.Const.Co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .