ADDN/ATLN AND SPECIAL REPAIR TO BLDG NO P-132 AT TS MAHUL UNDER GE (NW) MANKHURD

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm each.incl taking down grill and stacking for issued under Sch of Credit etc complete all as specified and directed

Taking down chowkats or frames, exc 1.5 sqm but not exc 4 Sqm each with wooden/ flush/ PVC shutters (Without taking off shutters from the frame) including taking down of hold-fasts by cutting/chasing etc from existing surfaces and also taking down of MS grills (where exists) etc complete all as specified and directed

Taking down aluminium windows n.exc 1.5 sqm each etc complete all as specified and directed

S&F standard aluminium section powder coated (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE ) as in frame, shutters for doors, window / ventilators, partitions, fixed / openable / sliding or in any pattern, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc complete all as specified and directed. (Aluminium section shall be of make Jindal/Hindalco/ Indalco) Note:- Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. Cost of other items / accessories required for entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and wire cloth shall be measured and paid separately as supply only under respective items.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supply and fixing in opening as per specification given under SSR Part II 2010 including making good the disturbed surface etc complete all as specified and directed. Make: Rajashree or equivalent.

M&L for factory made solid PVC panel type PVC door shutter 30mm thick consisting of frame madeout of MS tubes for top and bottom rails MS frame shall be covered with moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent supplying and fixing in the frame at site as per specifications and drawing given under SSR Part I 2009 etc complete all as specified and directed. Make : Rajashree or equivalent.

M&L for kiln seasoned and chemically pressure treated second class Hard Wood (SAL/Hollock/Kalasiris) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints etc complete all as specified and directed.

S&F factory made 35mm thick plain, framed panelled shutter (two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm veneered particle board with commerical veneering on both faces, the size of rails and stiles shall be as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated of 2nd class hard wood (Hollock/Sal/Kalasiris), etc complete all as specified and directed.

S&F factory made class hard wood glazed and skeletion shutter 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR part-I, section 8, clause 8.20 (a); supplied and fitted to chowkats etc complete all as specified and directed.

Supply only 4mm thick figured glass, pinhead type for aluminium louvered windows etc complete all as specified and directed.

Taking down Shutters of any description n. exc 1 sqm in cupboards etc complete all as specified and directed.

Supply only 25 mm thick veneered particle board panels, interior grade, solid core, medium density, general purpose type with commercial face veneers type BB, etc complete all as specified and directed.

M& L for preparation of new wooden or wood based surfaces of any description , over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Taking down Grills of any description etc complete all as specified and directed.

S&F aluminium anodised Grills of approved design for window / Bolcony ventilators and fixing with F/U channel for window, ventilators, balcony openging in architectual or rectangular type in existing building, including drilling as required in RCC sections, etc complete all as specified and directed. Note: The Grills shall be of Model DG-102/DG-104 of Make Deco or equivalent make as approved by the GE.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in coping, bed blocks, roof curb, mud stops, coving at junction of wall and chajjas etc including weathering, slightly rounded or chamfered angles, provision of necessary form work, etc complete all as specified and directed.

S&F hold fasts etc and similar small articles made out of mild steel Flat etc conforming to Fe-290 Gde - E-165, etc complete all as specified and directed.

S&F in repairs 20mm dia Harrison rails, mild steel, chromium plated, curtain rails with and including fixing brackets, stops, rollers etc, complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy, etc complete all as specified and directed.

S&F stainless steel butt hinges with extruded aluminium alloy with galvanised mild steel hinges pins 100mm size tyupe C-21 etc complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section of size 150 mm length etc complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section and fixed 200 mm etc complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type anodised etc complete all as specified and directed.

Supply only 4 mm thick plain sheet glass, ordinary quality, etc complete all as specified and directed.

Supply and fixing 4 mm thick plain sheet glass, ordinary quality with and including provision of new rubber gasket after hacking out old broken glass (any size, quality or description) for existing aluminium joinery, etc complete all as specified and directed.

Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm for new aluminium joinery, etc complete all as specified and directed.

M&L for 20 to 25 mm thick machine cut pre-prolished cuddappa stone Slabs (table rubbed and polished) as in cills, jambs, soffits, cooking platform etc, pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of stone slab etc, including moulding/rounding to edges of the slab and also including provision of 15mm thick screed bed in CM 1:4, etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc, complete all as specified and directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted or forged into spikes: framed guard bars : barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 Gde E -165 etc complete all as specified and directed.

M&L preparing new steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome etc complete all as specified and directed.

Chipping, removing carefully loose/damaged concrete including plastering (total thickness upto 40mm ) from surfaces of RCC members, in any location by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MD land etc complete all as specified and directed. Note : Hard concrete shall not be removed by force

M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hour between the coats, etc complete all as specified and directed. Note :- Mode of measurement: superficial area of concrete will be measured.

M&L for Anticorrosive Treatment to Reinforcement using Corroseal - ZR of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces etc complete all as specified and directed. Note :- Mode of measurement: superficial area of concrete will be measured.

M&L for providing additional mild steel TMT bars in various structural RCC members like column, beams and Slab etc. including cutting, bending, fixing the bars, tying with and including binding wire etc complete all as specified and directed.

M&L for shear connectors of 8mm dia TMT bars including anchoring of the reinforcement bars in existing RCC member by providing holes of minimum 10d depth and grouting in position with locfix (fosroc), including drilling of holes, cleaning and other relevant works, etc complete all as specified and directed

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete / mortar by brush application, etc complete all as specified and directed.

M&L for casting & repairing of excessively damaged distressedRCC members with prebatched, prepacked, single component ready to use microconcrete from M/s. Krishna Conchem Molith MC) or equivalent of Dr. Fixit as approved by GE at any level and at any lead or lift as directed including scaffolding , also including mixing , laying, levelling, finishing, curing etc as per manufacturer's specifications etc complete all as specified and directed. Note : Reinforcement & formwork shall be only shall be measured and paid separately.

M&L for building up the profile of structural members using polymer modified mortar from M/s. Krishna Conchem (Molith PMM) OR Polymer mortar HB of Dr Fixit, while the bonding agent is still tacking upto 20mm thickness, including levelling, profiling , formworking ,scaffolding etc complete all as specified and directed.

M&L forrnwork to sides of pillars. posts. struts. piers. columns and stanchions for fair finished surfaces of concrete,square, etc complete all as specified and directed.

M&L building up the profile of structural members using polymer modified mortar of Krishna Conchem (Molith PMM) or polymer mortar HB of Dr Fixit while the bonding agent is tacking upto 40 mm thickness (of 20x20 mm each in 2 layers) including levelling ,profiling formworking ,scaffolding etc complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water complete all as specified including necessary scaffolding and safety arrangement etc complete all as specified and directed.

M&L for 12 mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing surfaces even and smooth, etc complete all as specified and directed. Make: Easy Plast from M/s wall plast or chemplast or readyplast from Ultratech Note: The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with ready mix plaster and nothing extra shall be payable on this account.

M&L for rendering 05 mm thick in cement mortar (1:3) to ceiling, finishing the surfaces even and smooth without using extra cement, etc complete all as specified and directed.

M&L for leakage / seepage proof coating consisting of preparing after complete removal of the old surfaces of existing exterior walls, parapet walls, chajjas etc. and applying Primeseal primer of M/s Dr Fixit or equivalent chemical of M/s STP Ltd as approved by the GE or one coat of Chemstic PDE 600 elastomeric coating (and allowing to dry for 8hrs) under torch dry condition and subsequently applying two coats of water proofing decorative elastomeric coating system Raincoat of M/s Dr Fixit with DFT 100microns or Shalicryl 215 of M/s STP Ltd or Chemstic PDE 600 elastomeric coating (the surfaces after painting one coat shall be allowed to dry for 6 to 8hours before application of next coat) including necessary scaffolding etc complete all as per manufacturer instructions, etc complete all as specified and directed. Note: The aforesaid treatment shall be got executed by the contractor from the authorised applicator of the manufacturer(s) and also necessary authenticated documents on account of above shall be submitted by the contractor to the GE.

M&L for 3 mm thick (minimum) white cement based wall care putty in two coats on new of walls/ceilings etc, finished even and smooth, etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper with roller over one coat of primer, etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper with roller over one coat of primer, etc complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, walls, aprons laid bedded and pointed in any Mortar etc complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc 15cm thick (Below or above Ground Level) etc complete all as specified and directed.

M&L for providing PCC 1:4:8 type D2 (40mm graded aggregate) as sub base 75mm thick etc complete all as specified and directed.

M&L for coloured 450x300x6mm thick glazed ceramic tiles on vertical surfaces such as skirting,dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the colour of tiles, over and including 10mm thick cement mortar backing coat in CM 1:4, etc complete all as specified and directed.

M&L for coloured Non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with nthe colour of tiles, over and including 15mm thick cement mortar screed bed in CM 1:6, etc complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick, coloured (squares/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) etc complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed.

Dismantling completely existing roof treatment (excluding cement screed bed ) including loosened cement plaster and exposing the top surface of RCC slab and making good the same in CM 1:4 and removing rubbish, etc to a distance exceeding 500m and not exceeding 1.0km etc complete all as specified and directed.

M&L for APP modified roof treatment over existing roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications complete all as specified and directed:- (a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying APP modified water proofing membrane reinforced with non woven polyester fibre weight not less than 160gm/Sqcm using butane torch by torch application with 10cm side lap and 15cm end lap. (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.50 Kg/Sqm. (ii) Non woven polyester weight not less than 160gm /sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sqcm (v) Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi) Elongation : > 20% in both directions. (vii) Impermeability/water tightness at 2 Kgf/cm2. (viii) Water absorption - Not more than 1% on mass within 24 hours. (ix) Cold flexibility - Minimum (-) 20C. (x) Dimentional stability % change = Maximum 1%.

M&L 10 mm thick screed bed on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth w/ousing extra cement etc complete all as specified and directed.

M&L for applying one coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm over APP membrane surfaces, etc complete all as specified and directed.

M&L for Hydraulically machine pressed cement concrete tiles of size 300x300X25mm thick (with grey cement and no pigment), set in neat cement slurry laid over terrace and roofs etc including provision of 15mm thick cement screed bedding layer in CM 1:4 mixed with water proofing compound as per manufacturer's instructions, tiles joints shall be grouted and immediately after grouting, the joints shall be pointed flush in CM 1:3 (in separate process) mixed with water proofing compound as per manufacturer's instructions etc, complete all as specified and directed. Note : supply only water proofing compound will be measured and paid separately as "supply only".

S&F vitreous China Europeon water closet (Pedestal Pattern) including 10 ltr capacity low level flushing cistern with necessary Pvc connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

M&L health faucet of 15 mm dia with 1 m tube hook , Cat No 187 of Prayag or equivalent make as approved by the GE etc complete all as specified and directed.

S&F two way Bib cock of Pryag make Cat No SQT-512 ANKN or of ESSCO or equivalent of Marko ,Parko as approved by the GE etc complete all as specified and directed.

S&F in vitreous China wash basin white, flat back size 550 x 400mm including 15mm dia fancy type pillar tap of Make ESSCO Cat No MQT-507 or equivalent of make Parko as approved by the GE, , chromium plated CP waste coupling, chain and plug, waste fitting, union and waste pipe 32mm dia of required length and all necessary 450mm long outlet and inlet PVC connections pipes with PTMT check nuts etc complete all as specified and directed.

S&F 15mm bore brass CP Stop Valve, Make ESSCO Cat No MQT-513 A or equivalent of make Parko/ ZOLOTO as approved by the GE, etc complete all as specified and directed.

S&F 15mm bore brass CP Bib Tap, Make ESSCO Cat No MQT-511 or equivalent of make parko as approved by the GE, etc complete all as specified and directed.

S&F in repairs brass chromium plated, shower rose, 125mm size with and including 195mm long 15mm bore brass chromium plated shower arm with bend of 45 degree, etc complete all as specified and directed.

S&F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum Weight 25 gram), etc complete all as specified and directed.

Taking up or down steel water tubing and connections of size 15mm bore, etc complete all as specified and directed.

Taking up or down steel water tubing and connections of size 20mm bore, etc complete all as specified and directed.

Taking up or down steel water tubing and connections of size 25mm bore, etc complete all as specified and directed.

Supply & fixing 15mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, etc complete all as specified and directed.

Supply & fixing 20mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors etc complete all as specified and directed.

Supply & fixing 15 mm CPVC pipes UV stable,leak proof, tough ,rigid , conforming to IS:15778 of SDR 11 standard., medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, etc complete all as specified and directed.

Supply & fixing 25mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors etc complete all as specified and directed.

S&F of 75 mm bore UPVC (SWR) soil, waste, ventilating rain water pipe type 'A', single socketed, (ISI Marked) in any length with and including ruber ring joints, complete fixed to wall with necessary PVC standard stay clamps etc, including taking down existing SWR pipes(including fittings) of any description, etc complete all as specified and directed.

S&F 110 mm bore UPVC (SWR) soil, waste, ventilating, rain water pipe type 'A', single socketed, (ISI Marked) in any length with and including ruber ring joints, complete fixed to wall with necessary PVC standard stay clamps etc, including taking down existing SWR pipes(including fittings) of any description, etc complete all as specified and directed.

S&F 75mm bore UPVC (SWR) branch piece single (Single Y), equal or unequal with and including rubber ring joints, etc complete all as specified and directed.

S&F 110mm bore UPVC (SWR) branch piece, single (single Y), equal or unequal with and including rubber ring joints, etc complete all as specified and directed.

S&F 75 mm bore UPVC (SWR) Bends with and including oval access door and also including rubber ring joints, etc complete all as specified and directed.

S&F 110 mm bore UPVC (SWR) Bends with and including oval access door and also including rubber ring joints, etc complete all as specified and directed.

S&F 20 mm dia brass chromium plated tubular towel rail 'D' type 600 mm long between flanges, etc complete all as specified and directed.

S&F cast iron Nahani trap with 75mm dia out let including grating, connecting, jointing to waste pipe with lead joints, also including embedding the same in PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) mixed with water proofing compound in the proportion as recommanded by the manufacturer(s), taking out existing unserviceable traps by hacking out concrete joints and making good of surfaces, etc complete all as specified and directed.

M&L for filling of lean concrete 1:5:10 type E2 (using 40 mm graded stone aggregates ) for filling in sunken portion, as per requirement, etc complete all as specified and directed.

M&L for PCC 1:2:4, type -B-1, using 20mm graded stone aggregated as in sub base of sunkun floor mixed with WPC in the proportion as recommanded by the manufacturer(s), etc complete all as specified and directed. Note : WPC will be measured and paid separately as supply only.

M&L for rendering 15 mm thick rendering in CM 1:4 mixed with WPC in the proportion as recommanded by the manufacturer(s), over top of sunken floor, roof surfaces etc, finished even and fair, etc complete all as specified and directed. Note: WPC shall be measured and paid as "supply only" separately.

M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.20 Kg/Sqm including cleaning the surfaces over newly plastered surfaces of sunken portion, complete all as specified and directed.

Supply only intergal water proofing compound, etc complete all as specified and directed.

Dismantling existing water tanks of capacity exc 250 ltrs and not exc 500 ltrs, etc complete all as specified and directed.

Supplying and fixing rotational moulded polythylene water storage tanks, double layered (ISI marked) of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, including provision of necessary fittings for connecting the overflow ball brass valves, high pressure, with polythene float and flynut drain out, inlet and outlet pipes, etc complete all as specified and directed.

S&F in repairs gunmetal gate valve, ISI marked with iron wheel head, screwed at both ends for iron pipe or ferrule of 25mm bore and provision of necessary fittings like unions, check nuts, etc complete all as specified and directed.

M&L plain cement concrete type C-1 1:3:6 (using 20mm graded stone aggregates) as in plinth protections 75 mm thick finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3. m c/c filled with mastic mortar etc complete all as specified and directed.

M&L Precast cement concrete cover slabs of size 900 mm x 450 mm x 75 mm for drain cover and similar work with plain faces set in cement mortar 1:6 etc complete all as specified and directed.

Demolition of reinforced cement concrete of any description as in slabs, beams, columns and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilitate demolition and removing the retreived debris out side MD land, etc complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing the retreived debris out side MD land, etc complete all as specified and directed.

M&L Hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder etc complete all as specified and directed.

M&L75 mm thick Cement Concrete in sub base of floors type D-2, PCC 1:4:8 ( 40mmgraded aggregate )

M&L for coloured Parking tiles, heavy duty of size 300x300x10 mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the colour of the tiles, over and including 15mm thick cement mortar screed bed in CM 1:6, etc complete all as specified and directed. Make : JOHNSAN /SOMANI/ORIENT BELL/KAJARIA.

M&L for leakage / seepage proof coating consisting of preparing of new plastered surfaces exterior walls, parapet walls, chajjas etc. and applying Primeseal primer of M/s Dr Fixit or equivalent chemical of M/s STP Ltd as approved by the GE or one coat of Chemstic PDE 600 elastomeric coating (and allowing to dry for 8hrs) under torch dry condition and subsequently applying two coats of water proofing decorative elastomeric coating system Raincoat of M/s Dr Fixit with DFT 100microns or Shalicryl 215 of M/s STP Ltd or Chemstic PDE 600 elastomeric coating (the surfaces after painting one coat shall be allowed to dry for 6 to 8hours before application of next coat) including necessary scaffolding etc complete all as per manufacturer instructions, as specified & directed. Note: The aforesaid treatment shall be got executed by the contractor from the authorised applicator of the manufacturer(s) and also necessary authenticated documents on account of above shall be submitted by the contractor to the GE

Taking down copper/ aluminum point wiring (Light/Fan/Socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, socket, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces to walls floors etc complete all as specified and directed.

Taking down submain wiring any size etc complete all as specified and directed.

Taking down of Old MCB DB of any size with its components etc complete all as specified and directed.

M&L for concealed point wiring with PVC insulated unsheathed 1100 Volts grade single core multistranded copper conductor cable 1.5 Sqmm drawn in and including PVC conduit not less than 25mm and accessories, fixed on wall / ceiling etc with neccessary fixing accessories and earth continuity conductor cable of 1.5 Sqmm size connected to common earth and earth dolly including 2 mm thick pressed steel terminal boxes concealed in wall covered with laminated sheet top cover 3 mm thick for mounting switches / sockets / fan regulators fixed with Cadmium plated machine screws all as specified for the following: (a) One light / fan / bell point controlled by one switch. Note: Cutting chasing and repairing of wall for concealed conduit shall be included in the quoted rates.

All as per Item No 103.00 but One 5 Amps 2 pin / 3 pin switch socket outlet multipurpose on same board with other switches etc complete all as specified and directed.

All as per Item No 103.00 but One 5A 2pin/3pin switch socket out let multipurpose on independent Board etc complete all as specified and directed.

M&L for concealed point wiring with PVC insulated unsheathed 1100 Volts grade single core multistranded copper conductor cable 2.5 Sqmm drawn in and including PVC conduit not less than 25mm and accessories, fixed on wall / ceiling etc with neccessary fixing accessories and earth continuity conductor cable of 2.5 Sqmm size connected to common earth and earth dolly including 2 mm thick pressed steel terminal boxes concealed in wall covered with laminated sheet top cover 3 mm thick for mounting switches with Cadmium plated machine screws etc complete all as specified and directed.

Supply & Fix switch piano single pole flush type 5A, 230 V one way etc complete all as specified and directed.

Supply & Fix Bell push flush type 5 amp, 230 Volts etc complete all as specified and directed.

Supply & Fix switch socket combination 2 in 1 , 5 Amps multipurpose flush type etc complete all as specified and directed.

Supply & Fix switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type universal etc complete all as specified and directed.

Supply & Fix Ceiling rose surface bakelite three terminal, 240 V, polycarbonate body etc complete all as specified and directed.

Supply & Fix electronic regulator Step type 2 module type 240V suitable for ceiling fan etc complete all as specified and directed.

Supply and fix bell ding dong AC 230 V single pole etc complete all as specified and directed.

S&F Retro LED tube rod 20 Watts, 230 volts, with high efficency PMMA diffuser, the rod shall confirm to Cat No SZFRTMX020 of Shakti or Equivalent from Crompton/Philips/Bajaj etc complete all as specified and directed.

S&Fdecorative box type fitting prewired for Retro LED light fitting 20 Watts, 230 volts, including 2 Nos PVC Square blocks , scews , 3 core 1.5 Sqmm cable for connection between ceiling rose & fitting etc complete all as specified and directed. The fitting shall confirm to Cat No SZRFMX1-20 of Shakti or equivalent from Crompton/Philips/Bajaj.

S&F Retro LED tube rod 10 Watts, 230 volts, with high efficency PMMA diffuser, the rod shall complete all as etc complete all as specified and directed. The tube rod shall confirm to Cat No SZFRTMX010 of Shakti or Equivalent from Crompton/Philips/Bajaj

S&Fdecorative box type fitting prewired for Retro LED light fitting 10 Watts, 230 volts, including mounting blocks fitting fixing check nuts ,3 core 1.5 Sqmm cable for connection between ceiling rose & fitting etc complete all as specified and directed. The fitting shall confirm to Cat No SZRFMX1-18 of Shakti or equivalent from Crompton/Philips/Bajaj

Taking down carefully and refixing of ceiling fan and painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust , connecting up including provision of cable from ceiling rose or connector to fan, etc complete all as specified and directed.

M&L for rewinding of ceiling fan of size upto 1200mm with suitable gauge copper wire , including new bearing, incuding new capacitor complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase 230V of size 300mm sweep with, blades, and frame and louvers etc complete all as specified and directed. The fan shall Confirm to Cat No FRESHEE MK of bajaj or equivalent to crompton/Havalls

M & L for Cutting holes into or through brick walls built in cement mortar for fixing the fan and making good the distrubed surfaces in cement mortar 1:3 etc complete all as specified and directed.

Supply & Fix MCB DB Double Door SPN 8 way 240 volts, including cutting chasis in wall, concealing the DB in wall, making good the distrubed surfaces and making connections etc complete all as specified and directed.

M&L for MCB SP, 240 volt, 6 to 32 Amps, 10 KA etc complete all as specified and directed.

M&L for MCB SPN, 240 volt, 32 Amps, 10 KA etc complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded copper conductor of size 6.0 sqmm 3 core etc complete all as specified and directed.

Supply install, test and commissioning of Powder coated LT Feeder panel cubical indoor type Channel mounted compartmentalized in construction all Confirming to IS 8623 Part 1 1993 CPRI approved factory fabricated of make per given in PS made out of 2 mm thick CRCA sheet & suitable size to accomodate all accessories / fittings, to accommodate incoming MCCB and TPN Copper bus bars, incomer MCCB and outgoing MCCB, MCB, Contactors The TPN bus bars shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on DMC/epoxy insulator. The bus bar shall have copper extension links for connecting with out going MCCB. The cubicle shall have a bottom channel & free standing frame made of angle iron of size not less than 40mm X 40mm X 6mm ut of A detachable predrilled gland plateof thickness not less than 3 mm thick powder coated should be used at the bottom for entry of armoured cable of adequate size with glands.The above panel shall be front openable & lockable by key. The panel shall be Dust, vermin proof and powder coated of approved thickness complete including CTs, control wiring by 1.5Sqmm Wire and consisting the following, including taking down of old unsv panel after disconnecting Existing cables, removing of Existing energy meters and re fixing the energy meters at new panel & Reconnecting the cables to new panels and including PCC foundation, excevation, grouting bolts, including following accessories:- a) Copper bus bar 200 Amps for 3 phase and Neutral b) MCCB FP 63 Amps 415 Volt 25 KA - 1 Nos c) MCB TPN 32 Amps, 10 KA 415 Volts- 1 Nos d) MCB SPN 32 Amps, 10 KA 230 Volts - 6 Nos e) Digital Ameter -01 No f) Digital Volt Meter - 01 No g) Space for Fixing 6 Nos of Single Phase Energy Meter of Capacity 40 Amps h) RYB Indicators - 1 Set Note - The lay out drawing of the panel shall be got approved by the contractor before panel fabrication and shall be fabricated from CPRI approved manufacturer.

Supply and fix security light fittings LED type 60 Watts complete with and including drivers, pressure die cast aluminium housing, toughened glass diffuser, IP65/66 and wired with accessories complete including taking down of old fitting etc complete all as specified and directed. The fitting shall confirm to Cat No - SZPSLPM060 of Shakti or Equivalent from Philips/bajaj/Crompton.

S& F in replacement of GI steel tubing medium grade 60mm dia and length up to 1.5 meter bent to shape of offset angle upto 45 degree for fixing of security /street light fittings including MS clamps made of 32mm x5mm flat iron, nuts, bolts, etc complete all as specified and directed.

M&L for earthing using GI earthing strip 32 x 6mm complete with galvanised steel earth plate electode 600mmx600mmx6mm thick buried directly in ground, earth pit not less than 2.25 meters deep below ground level connection to and including GI strip of size 32x6mm to the extend 7.5 mtr as earth lead by means of GI bolts, Nuts etc. with provision of charcoal and salt all as per electrical plate No 3 of SSR Part I including water arrangement with GI Pipe 20 MM dia (medium Grade), earth lead protection pipe 50mm madium grade with bends, elbow etc. from earth plate to test point, excavation and earth work returning, filling, ramming and removing of soil to distance not exc 50mtr, make good to match with existing surface making PCC pit (Earth chamber) having internal size 30cm x 30cm x 30cm and outer size 60cm x 60cm x 60cm with RCC reinforced cover 50mm thick with one lifting handle made of 8mm dia MS bar funnel wie mesh and testing on completion including making test point on wall as per SSR specification etc complete all as specified and directed. Note : A sum of Rs 22,670.00 towards sch of credit shall be deducted to arrive the contract sum.

mp construction co

Joy builders

M/s Hari Om Construction

H R ENGINEERS

Parmatma Enterprises

Atharva Enterprises