SPL REPAIR OF 4.17 KM BLACK TOP ROAD AT KARAM SINGH ENCLAVE UNDER GE(S) AT BATHINDA MIL STN

Amount

Material and labour for Repair to potholes any depth, not exc 1sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed by Engineer-in- charage. Note : The rate of supply of road metal is included in this item and nothing shall be paid extra on this account.

Material and labour for preparing black top surface by brushing with wire brush for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with air pressure through air jet using air compressor to remove all the loose dirt etc. including removing the mud etc. to a distance minimum 1.5 mtrs from edge of road and applying evenly a tack coat of bituminous primer using paving bitumen (VG-10) @ 5Kg per 10 sqm of road surface by sprayer operated hot pressure mechanism including supplying, laying, spreading 30 mm consolidated thickness of semi dense asphaltic concrete grading 2, maximum aggregate size 9.5 mm, with job mix formula using paving bitumen (VG-30) @ 5.0% binder content by weight of total mix using mechanical paver for levelling within the specified tolerance as specified in SSR Part-I, rolled and consolidated to required camber and gradient with power roller for uniform smooth surface etc. complete all as specified and directed by Engineer-in-Charge. Note :- (i) The job mix formula shall be approved by GE. (ii) 5.0% binder content has been specified for quoting purpose of bid. If the quantity of the bitumen exceeds the 5.0% as mentioned above, no plus price adjustment shall be made. If the quantity of bitumen required as per job mix formula works out less than 5.0%, the recovery of the supply only bitumen shall be effected @ Rs. 50/- per Kg. The cost of transportation of material and testing charges shall be borne by the contractor. (iii) Contractor shall intimate the planned date of incorporation of mix in advance to GE. Premix will be approved in writing by Rep of Accepting Officer at plant site before incorporation of the same in the work

Supplying, laying and spreading upto 75mm thick or less ( consolidated thickness) premix bituminous macadam (BM) filling in depression grade 2 (using 19.2 mm graded stone aggregate) in single layer with using mechanical paver using paving bitumen (VG-30) @ 3.4 % by weight of total mix with job mix formula, laid / rolled and compacted/ consolidated to required camber and gradient with 8 to 10 tonne power roller to a uniform smooth surface etc. complete all as specified and directed by Engineer-in-Charge. Note :- (i) The job mix formula shall be approved by GE. (ii) 3.4% binder content has been specified for quoting purpose of bid. If the quantity of the bitumen exceeds the 3.4% as mentioned above, no plus price adjustment shall be made. If the quantity of bitumen required as per job mix formula works out less than 3.4%, the recovery of the supply only bitumen shall be effected @ Rs. 50/- per Kg. The cost of transportation of material and testing charges shall be borne by the contractor. (iii) Contractor shall intimate the planned date of incorporation of mix in advance to GE. Premix will be approved in writing by Rep of Accepting Officer at plant site before incorporation of the same in the work

Material & Labour for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n.exc 10cm wide road pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Cat Eye Solar Reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with including MS stud of suitable size as per manufactures instructions complete all as specified and directed by Engineer-in-charge.

Supply and fixing Solar Cat Eye aluminium alloy (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficieny Mono rystaffie solar panel 2.4V/0.3 watt one Ni-ed rechargable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 med complete as per manufacturers instruction complete all as specified and directed by Engineer-in-charge.

FAIR DEAL CONSTRUCTION CO

BALAJI CONSTRUCTIONS

GARG INFRA PROJECTS

M/s Amit Associates

M K Enterprises

M/s Azure Infrastructure Construction Co.