SPECIAL REPAIR TO BLDG NO T-42 AT FORT AREA UNDER GE KAMPTEE.

Amount

Dismantling floor, heart or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolation of cement concrete in ground floor and paving nexc 15cm thk below or above ground level as specified and directed.

M&L for providing 25 mm thick PCC 1:2:4 Type B-2 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement complete all as specified and as directed.

M&L colored glazed ceramic tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in site or color cement to match including rendering 10mm thick in cement mortar 1:3 complete all as specified and as directed.

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4 with fixing of using by spacers & filled with epoxy grouting complete all as specified and as directed.

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqm in Skirting etc set and including rendering 10mm thick in cement mortar 1:3 complete all as specified and as directed.

M&L joint free colored non skid ceramic tiles 6 to 7 mm thick (square or rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L joint free colored non skid ceramic tiles 6 to 7 mm thick (square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqm in Skirting etc set and including rendering 10mm thick in cement mortar 1:3 complete all as specified and as direted.

M&L joint free colored non skid ceramic tiles 6 to 7 mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as 'specified and as directed.

M&L for machine cut cudappa stone slab 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Rounding to edges of stone slabs one edge , such as in steps ,cooking platforms, and other similar situations complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone wall, etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&l for rendering 10mm thick in cement plaster in cement mortar 1:6 , finished even and smooth without using extra cement complete all as directed.

M&L for 15mm thick rendering CM 1:4 on fair faces of brick work using water proofing compound as per manufacture instruction (WPC shall be measured separately) complete all as specified and as directed.

Material and labour for rendering 5 mm thick in cement mortar 1:3 on fair faces of concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing admixture of make-pidilite or equivalent complete all as specified and as directed.

Dismantling of asbestos cement sheet (corrugated , semi-corrugated etc) sheets in roof coverings complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as sepcified.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as sepcified.

Dismantling mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for Roof trusses (framed), trussed, purlins, crane ganbies, rails and fastenings and heavy bracket framing (lleam, tee, angle, charmel or flat sections) including distance pieces, cleats etc conforming to IS 1161-1979 grade Fe 290 (Gde E-165) all as specified and directed

S&F framed work such as grills ,guard bars with mild steel Square bars with ends of bars shouldered and/ or riveted and similar work confirming to FE 290 Gde-E-165 complete all as specified and as directed.

Dismantling wall and ceiling boards ( Fiber, pulp, insulation etc) or insulation boards, slabs, blankets or of any description in any thickness including cover fillets complete all as directed.

Material and labour 4mm thick for Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and as directed. (Noted: Grid shall be measured seprately)

M&L for Gl powder coated snap grid frame work for flase ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 2mm Gl supended wire of suitable length and butter fly clip of size of main Tee shall be 32mmx 15mm x 0.30mm, cross Tee shall be 32mm x 15mm x 0.30mm thick and wall angle shall be 24mm x 24mm x 0.30mm thick complete all as specified and as directed.

Dismantling timber scantlings in frame work 40 sq. cm and over in section, in any position all as specified and directed.

M&L 2nd class hard wood in scantling clean sawn and unframed timber complete all as specified and as directed.

Dismantling of brick work or stone/boulder masonary built in cement mortar including ashlar facing dressed stone and pre-cast concrete articles complete all as specified and directed

M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

M&L for Brickwork with flyash bricks, straight or curvedon plan to any radius in half brick thick walls,built in, built in cement mortar (1:6) complete all as specified and directed.

Taking down door / window frame with shutter of any description (without taking of shutter from the frame ) area not exc 1.5 sqm complete all as specified and as directed.

Taking down door / window frame with shutter of any description (without taking of shutter from the frame ) but area exc 1.50 sqm but not exc 4 sqm complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching and forming branch channel 91/1 round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as orginal formation complete all as specified and as directed.

S&F and 2nd class hard wood plain solid straight chowkats & frame wrought framed on the solid rounded or chamfered put together with glue pinned at joints. complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specified and as directed.

S&F Factory made solid PVC panelled door shutter 30mmthick (Style) consiting of frame made out of MS tubes for top & bottom rails ,MS frame shallbe covered withheat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20 mm width struck inside with solvent cement for styles and palin colour PVC sheet for Toprail : panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealedto the style and rail withsuitable PVC sheet beading and jointed toghether with solvent cement etc fixed with frame at site complete all as specified and as directed.

S&F 35 mm thick plain framed panelled factory made shutter made out of IInd class hard wood rail and styles and panel of 12 mm thick veneered particle board or 9 mm thick plywood with commercial veneering on both faces the size of rail and style as per IS 1083 (part-I) kiln seasoned an chemically pressure freated of any number of panel all as directed and directed.

S&F 30 mm thick second class hard wood for windows glazed and ,skeleton shutter open and prepared to receive glass , gauge etc. (without sash bars), edge of framing plain,chamfered or rounded. Fitted with cut and mitred beads for securing glass etc size of member of shutters as specified in SSR part -I complete all as specified and as directed.

S&F Anodized aluminium frame for doors,window,ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F Anodised aluminium window and ventilator shutters, side hung type/Sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

Supply and fix aluminium (powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as per manufacturer's catalogue and specifications complete all as specified and directed. (Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint

S&F figured glass, pin head type and glazing with oil putty in squares n.exc. 0.5 Sqm each of thickness 3.0mm. complete all as specified and as directed.

S&F for 150 mm aluminium handles cast type anodised complete all as specified and directed.

S&F for 150 mm Extruded brass handles, fabricated type polished complete all as specified and directed.

S&F for 300 mm brass sliding door bolts, with hasp, clips of nsheet, cast or extruded section and fixing bolts and sections and fixed complete all as specified and directed.

S&F for 150mm floor door stopper brass body of anodised brass body fixed complete all as specified and directed.

S&F 150 mm long Brass, barrel tower bolt of extruded section complete all as specified and directed

S&F mild steel medium weight could roll 100mm size butt hinges complete all as specified and directed

S&F Curtain rod with a telescoping brackets to fit both rod and mounting hardware modular type complete all as specified and directed.

Dismantling of PVC pipes (110mm/75mm bore), jointed in cement mortar and taking out of trenches/from walls including fittings as bands, branch pieces, traps etc complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floor/wall 75mm bore complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 110mm bore complete all as specified and as directed.

S&F PVC (SWR) junction double, (double T), equal or unequal of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius of 110 mm bore complete all as specified and as directed.

Demolition of RCC of any description and in any postion not otherwise specifically provided for etc complete all as specified and as directed.

M&L for TMT bars of 10 mm dia and over cut to length, bent to shape required and binding with mild steel wire (annealed) not less than 0.90 mm etc complete all as specified and as directed.

M&L for TMT bars of 8 to 10 mm dia and over cut to length, bent to shape required and binding with mild steel wire (annealed) not less than 0.90 mm in stirrups, spacers and binders complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-I using 20 mm graded aggregate as in lintels up to 1.5m clear span, cills, steps, seismic bands and other similar bands, parapets, copings, benching, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating incl waste formwork complete all as specified and as directed.

M&L for RCC 1:2:4 Type B1 ( 20mm graded stone aggregate) as in landings, cover slabs, (for man holes etc) and similar articles with plain faces set in cement mortar 1:4 complete all as directed and specified.

M&L 75mm thick cement concrete type B-2, 1:2:4 (using 20 mm graded aggregate) ,finished fair and even without using extra cement for plinth protection and similar work complete all as specified and as directed.

M&L for cutting chases, pinning in, making good to facings where required and Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed cills, sunshades, shelves, lintels, etc. water tubing or concealed conduit complete all as specified and as directed.

S& F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as in gauze door /window/ventilators shutters all as specified and directed.

Supply & fix 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and fixed to wall including taking up or down existing GI tubing complete all as specified and as directed.

Supply & fix 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and fixed to wall including taking up or down existing GI tubing complete all as specified and as directed.

Supply & fix 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and fixed to wall including taking up or down existing GI tubing complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top)of 1000 litres capacity hoisted and fixed in position and including dismantling water tank and removing from site complete all as specified and as directed.

S&F in repairs 15mm bore ball brass valves. high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (including 6 mm dia 50 mm long fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut) with Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including PVC valveless, syphonic action type, flushing cistern 10 LTRS CAPACITY, low level, white, with inlet, ball valve, float and handle including brackets fixed in repairs with 32 mm PTMT Flush pipes to pedestal pan, including all joints complete all as specified and as directed.

S&F in repairs Single lever basin Mixer without Popup waste with 450mm long Braided Hoses complete all as specified and as directed.

S&F in repairs 2 way bib cock with wall fange complete all as specified and as directed.

S&F Hand shower (health Faucet) (ABS body) with 8mm dia, 1.2 Meter long Flexible tube & wall Hook all as specified and directed

S&F Towel ring square fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

S&F Glass Shelf 600mm long fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

S&F Corner glass Shelf (with Bracket) fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

S&F Soap dish (polycarbide) fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

S&F Toilet Paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

S&F in repairs Wall mixer with provision for Overhead Shower with 115mm Long bend pipe on Upper Side, connecting Legs & wall Flanges complete all as specified and as directed.

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, Fancy type, screwed down, screwed for iron pipe or for brass ferrule Complete all as specified and directed.

S&F in repairs 15mm dia brass C.P fancy Type stop valves Complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&Fin repairs floor trap100 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and as directed.

Supply & fixed in repairs Wash Hand basin ( flat back or angle back )of size 550 X 400 MM white including , waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe complete all as specified and as directed.

S&F in repairs 40mm bore of pipe of low density polyethylene pipe (LDPE) of pressure rating 6kgf/Sqcm fixed complete all as specified and as directed.

Demolition of 150mm dia cement concrete bed in haunching and breaking up drain pipes SGSW set in cement mortar of the following dia complete all as specified and as directed.

M&L for concrete bed to drain pipes for 150mm dia pipe including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 complete all as specified and as directed.

M&L Salt glazed stoneware drain pipe 150mm dia laid in trenches and jointed as specified.

Dismantling boarding, any description, fixed in any position with nails as in cupboard, drawers, showcase, cupboard shutters, wooden shelves, Partition etc complete all as specified and directed.

M&L 18 mm thick prelaminated particle board, Exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber or aluminium frame work complete all as specified.

M&L 18mm thick Plywood, grade BWR, type BB fixed with screws to timber frame work with beading as requiredcomplete all as specified and directed.

M&L for 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all a specified and directed.

Preparation of newly steel surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of primer complete all as specified and as directed.

M & L for preparation of old steel surafces of any description over 10 cm width or girth & applying two caots of synthetic enamel complete all as specified and directed

M&L for preparation of old wooden surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

Preparation of newly wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coats of oil bound distemper over a coat of birla white care putty complete all as specified and directed

M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of birla white care putty complete all as specified and directed

M&L for complete removal of existing treatment and preparation of surfaces and applying two coats of weather shield paint over a coat of primer complete all as specified and directed.

M&L for Preparing new plastered surface and applying two coat weather shield paint (appex) over a coat of primer complete all as specified and directed.

Material and labour for applying two coats of oil bound distemper on ceiling over a coat priming paint including preparation of new surfaces complete all as specified.

M&L for complete removal of existing treatment and preparation of surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L Plain Cement concrete in sub bases/pavings Type D2 1:4:8 (40mm graded aggregate) all as specified and directed.

M&L Hardcore broken stone of gauge n exc. 63 mm, deposited, spread andlevelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in coping including weathering throating and necessary formwork complete all as specified.

Supply and fix stainless steel auto closing hydraulic hinges fixed with self-tapping screw as in position required and complete all as specified and directed

Supply and fix stainless steel modular handle 4 inch fixed with self-tapping screw as in position required and complete all as specified and directed.

Supply and fix magnetic catcher of size 20mmx50mm suitable for cup board shutter complete all as specified and as directed.

Taking down point wiring of any type (copper/aluminum), light fittings of any type and any size, switches, sockets, regulators, bell push, call bell, ceiling rose, switch boards, etc and making good to the disturbed surfaces of walls/ floor including white washing/ colour washing/ distemper to match with existing finishes, complete all as specified and directed.

M&L for Point wiring complete for One light/Fan/Exhaust Fan point controlled by one switch with PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade FRLSH PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including earth wire of same size, pressed steel modular boxes sunk on wall incl modular cover with frame of any size complete including dummy switches wherever required all as specified and making good disturbed surfaces. Note :- Cost of cable of size 2.5 sqmm FRLSH provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate.

All as per item No 113 above but One 3 pin 6 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 113 above but with cable size 2.5 sqmm for One 3 pin 6 amps socket out let point on independent board.

All as per item No 113 above but one light point controlled by two, two way switches complete all as specified and directed.

All as per item No 113 above but One bell/buzzer point controlled by one bell push complete all as specified and directed.

All as per item No 113 here in before but with cable size 4 Sq mm for one 5 pin 16 Amps socket out let on independent board, complete all as specified and directed

M&L for point wiring with telephone cable/data cable copper conductor FRLSH, Two pair, 0.50 sqmm, P.V.C. insulated and sheathed , anti termite, colour coded twisted pairs and rip cord, Double outlet The length of telephone cable upto 07 meter length or less as per site condition. Complete all as specified and directed. Note : PVC Conduit should be measured seperately in respective items

M&L for point wiring with Coaxial cable (TV) copper conductor FRLSH, P.V.C. insulated and sheathed , anti termite, colour coded twisted pairs and rip cord, Double outlet The length of coaxial cable upto 07 meter length or less as per site condition. Complete all as specified and directed. Note : PVC Conduit should be measured seperately in respective items

Supply and fixing modular telephone jack RJ-11, ISI marked white colour fixed in 1 M box fitted in Robust designed assembly plates smug fit on the wall, Dust Free Glossy Finish including pressed GI concealed terminal boxes not less than 1.6 mm thick, inner plate and outer cover, finger proof terminals with captive screws having front fixing & removing features without removing plates complete all as specified.

Supply and fixing modular TV socket (RG-06), ISI marked, white colour fixed in 1 M box, fitted in Robust designed assembly plates smug fit on the wall, Dust Free Glossy Finish including of pressed GI concealed terminal boxes not less than 1.6 mm thick, inner plate and outer cover, all conforming to IS 3854 :1997 with finger proof terminals with captive screws having front fixing & removing features without removing plates complete all as specified.

Supply and fixing Rigid non-metallic PVC Conduit 20 mm dia (medium grade), ISI marked concealed in wall and heavy duty PVC conduit in roof / floor slab and ceilingexclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.

Supply & Fix modular 20 Amp Heavy Duty MCB COMBO Box, 4 module with MCB SP of capacity 20 Amp, for AC complete all as specified and directed.

Supply and fixing modular switch piano single pole, 1-way ,6 Amps, 230 volts, 1 module, complete all as specified and directed.

Supply and fixing modular switch piano single pole, 2-way 6 Amps, 230 volts, 1 module, complete all as specified and directed.

Supply and fixing modular switch piano flush type 16 Amps, 230 volts, single pole one way, one module, complete all as specified and directed.

Supply and fixing modular socket outlet 2/3 pin 6 Amps, 230 volts, 2 module, complete all as specified and directed.

Supply and fixing modular socket multipurpose 3 pin 6/16 Amps, , 230 volts, combined 2 module, complete all as specified and directed.

Supply and fixing modular step type two module electronic fan regulator heavy duty 120 watts, five steps, 230 volts , complete all as specified and directed.

Supply and fixing Modular Bell push 6 Amp , 230 volts, 2 module pole, 1-way, complete all as specified and directed.

Supply and fixing in repair call bell, Ding dong type, 230 volts AC single pole complete all as specified and directed.

Supplying & fixing for ceiling rose PVC Polycarbonate isolated body, three terminals, complete all as specified and directed.

Supplying and fixing LED batten, 4',20 watt (cool/warm white), surface / wall mounted with polycarbonate housing, high optically efficient polycarbonate diffuser, luminaire lumens >1900 lms, luminous efficiency > 90 lm /watt, LED binning as per ANSI Bin C78.377A as per IEC 624718 & electrical insulation class 1,IP20, 50000 burning hrs (min) as per L 70 criteria, complete all as specified and directed.

S & F surface mounted mirror light of capacity 5 watt, , 230 volts with CRCA housing with and intregrated electronic driver with luminous efficacy not less than 120 lumen/watt connector block etc, complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor with flexible conduit of suitable size complete all as specified and as directed.

Supply and fix Decorative Wall Mounting with Matt Gold finish with Borosil Glass Type suitable for 7.5 W A60 LED Lamp with E27 base with 1 N x 7.5 W A60 LED Filament Lamp or 1 N x 60 W GLS for Indoor Application complete all as specified and directed.

Supply & fix fittings with surface mount /recessed mount LED down lighters 12 W (Round/Square), cool white/warm white including driver, CRI ≥ 80, PF ≥ 0.95, lumen output ≥ 1130 Lm, Colour temp 3000/5700K, luminous efficiency > 97 Lm/watt, electrical insulation class 1, operating voltage 140-270, THD <20%, Surge protection 2.5 KV, 50000 burning hrs (min), complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt (Warm white/cool white), 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders, CRI ≥ 80, PF ≥ 0.95, lumen output ≥ 3600 Lm, Colour temp 3000/4000K, luminous efficiency > 120 Lm/watt, electrical insulation class 1, operating voltage 140-270, THD <20%, Surge protection 2.5 KV, 50000 burning hrs (min), complete all as specified and directed.

Supplying, fixing in replacement Bulk head , luminaire 10 watt LED, internally prewired with and including premium quality diffuser , CRI ≥ 80, PF ≥ 0.95, lumen output ≥ 800 Lm, Colour temp 6500K, luminous efficiency > 80 Lm/watt, electrical insulation class 1, operating voltage 140-270, THD <20%, Surge protection 2.5 KV, 50000 burning hrs (min), complete all as specified and directed.

Supply & fixing LED security light with aluminium pressure diecast housing, IP 65 protection, luminaire lumens > 3000 lm, power consumption < 25w and luminous efficiency > 100 lm /W, electrical insulation class 1, CRI > 80, temp range 0 to 50º C and in built electronic driver prewire upto terminal block with driver efficiency > 85%, power factor > 0.95, colour temp 6500 K Surge protection 3.5 KV, 50000 burning hrs (min) as per L70 criteria, multi stage constant current operated driver with operating voltage range 150-270V AC, fixed to pole or wall of building incuding connecting the fitting to electric source with & including twin twisted copper flexible wire of size 0.75 sqmm including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed.

Supply and fixing wall mounted fan 400mm sweep (with remote), Energy saving, 230 Volts, 50 Hz, power consumption is less than 120 watt, 5 star rated noiseless motor operation, 2100 RPM, Air delivery 95 cum/min complete, double ball bearing, copper wound, including electrically connecting from ceiling rose/6 Amp Socket outlet to fan connector with 0.75 sqmm flexible copper conductor three core with suitable size flexible PVC conduit, complete all as specified and directed.

Supply and fixing ceiling fan, 1400mm sweep (with remote), minimum BLDC (Brush Less Direct Current Energy saving ceiling fan, 230 Volts, 50 Hz power consumption is less than 35 watt, 5 star rated noiseless motor operation, inverter stabilization technology, 300 RPM, Air delivery 245 cum/min complete with standard accessories i.e (three blade, 02 Nos canopy, down rod of length 1.5 mtr to 2.0 mtr long, 02 Nos hanging clamps with rubber real insulator, nuts, lock nuts, bolts, washers, split locking pins etc), double ball bearing, copper wound, including electrically connecting from ceiling rose to fan connector with 0.75 sqmm flexible copper conductor three core with suitable size flexible PVC conduit complete all as specified and directed.

Supply and fixing Exhaust Fan high quality engineering plastic of size 250 mm sweep (copper wound), power consumption 35 watt ,1200 RPM, Air delivery 860 cum/min, 230 V-240V, 50 HZ, noise level not more than 50 dB with approved colour and with louver shutter complete including aluminium wire net frame on the exhaust side (outer surface of wall) including electrically connecting from ceiling rose to fan connector with 0.75 sqmm flexible copper conductor three core with suitable size flexible PVC conduit complete all as specified and directed.

Supply and fixing electric water heater of capacity 25 ltr, storage type, Feroglas coating inner container, Made of ultra thick super cold rolled steel plates, 0.8 MPa high working pressure, Incoloy glass coated heating elements, heating element heavy duty mag-nesium anode rod, adjustable knob for temperature setting, 230 V, 50 Hz, BEE 5 Star, Energy saving high density PUF insulation, complete with all accessories such as safety valve, thermostat,NRV, 02 Nos connection pipes (Hot & Cold) etc complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the following sizes :- 1x1.5 Sqmm, complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the following sizes :- 2x4 Sqmm with earth wire of 1x4 Sqmm including dismanling and taking down old submain wiring, complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the following sizes :- 2x10 Sqmm with earth wire of 1x10 Sqmm including dismanling and taking down old submain wiring, complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the following sizes :- 4x10 Sqmm with earth wire of 2x10 Sqmm including dismanling and taking down old submain wiring, complete all as specified and directed.

Disconnecting and taking down old unserviceable distribution boards any size any type including MCB TPN/SPN/SP etc and making good the disturbed surfaces to the existing surfaces complete all as specified and directed.

Supply & fix in repair sheet metal enclosure Vertical TPN DB 4 way as per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 250 A Copper Busbar for each phase with 2 Neutral bar, 2 Earthbar and Cable ties for Cable management, fully insulated busbar & shrouded Neutral bars, Improved Pan assembly for ease of installation, Prefitted masking sheet, Reversible Door for IP 43 & IP 54 DB's, With and including DPX³ 160 MCCB as incomer and SP/TP MCB's as outgoing, Complete all as specified and directed.

S & F for sheet metal enclosure MCB DB HTPN 4 way Horizontal type with suitable rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fixing MCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with 100 amp rat-ed bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fab-ricated, powder coated complete with out MCB and with enclo-sure blank plates for unused way suitable for 12 way ISI marked completed all as specified and directed.

Supply and fixing MCB TPN 40-63 Amp rating 415V, 10KA 'C' curve and current carrying ca-pacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing MCB SP 6-32 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing MCB SPN 40-63 Amp rating 240V, 10KA 'C' curve and current carrying ca-pacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fix three phase Energy Meter (DIN Rail mountable) 100 Amp, 2 module LCD display 230 V, accuracy class-I 50Hz,with parameters to show data, time, current reading, load, PF, voltage and KWH, complete all as specified and directed.

M&L electrically disconnecting and taking down existing ceiling/Exhaust fan from any height or in any position from existing building and keeping in safe custody for reuse at site after necessary cleaning & painting with one coat of synthetic enamel paint and re- hanging/re-fixing in original position but including replacement of three core flexible copper conductor cable from ceiling rose to fan connector block of size 0.75 sqmm etc & testing for proper functioning complete all as specified and directed.

Taking down carefully geyser/water heater of any Make type & size including disconnecting water connection/electrical connection, plug water flow, and refixing the same to original position including nuts, bolts, bracket etc when and where directed, complete all as specified and directed

M&L and T&P for disconnecting, taking down all connections of Air Ducting Coolers and shifting to MES Store of any capacity from the existing bldg complete all as specified and directed Note: Cost of T&P, labour etc shall be deemed to be included in quoted rate.

M&L and T&P for disconnecting of LT Panel/Changeover switch shifting, installing, testing and commissioning of LT Panel/Changeover swithc of any capacity from existing location to other location as directed by Engr-in-Charge inclduing PCC fdn if required and all fixing accessoires, complete all as specified and directed Note: Cost of materials, T&P etc required for connecting, commissioning and testing of LT Panel/Changeover switch DG Set shall be deemed to be included in quoted rate.

Earthing Complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.5 metre below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connection by using GI wire 4 mm by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and other end of the earth wire connected to main switch board protected by galvanised iron medium grade pipe 40mm bore in wall/floor/and GI Pipe 20 mm bore light grade for watering with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC pit cover including necessary excavation and earth work in any type of soil, returning slurry approved soil and disposed of surplus soil to a distance not exceeding 50 Mtr away all as shown in electrical plate No 3 of SSR 2009 ( Part-I). Notes (a) The unit rate shall include for GI protection pipe, GI watering pipe, wire mesh, funnel and excavation, RCC pit cover, test point, galvanised iron strip from top of earth plate upto 7.5 metres above ground level and if GI protection pipe is less than 7.5 metres, no price adjustment shall be made. (b) PCC pit shall be provided at least 50cm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipes and fittings, junction, elbow etc shall be deemed to be included in the unit rate.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 1,09,915.80]

M/s Rahul Traders (BID ID -3490777)

M/s Prakash R. Verma (BID ID -3493456)

M/s T.S.JOHAR (BID ID -3493426)

M/s Jagdish Staioners and General Stores (BID ID -3491761)

karambir constructions (BID ID -3493442)

M/s ABHIMAN HEGDE (BID ID -3491792)

M/s M.G. Hargunani (BID ID -3492843)