SMART PERIODICAL SERVICES FOR MD ACCN AND PERIODICAL SERVICES OF MD ACCN AT ZONE-6, ZONE-12, ZONE-7 AND VARRIOUS UNIT MD ACCN UNDER AGE B/R-I UNDER GE BABINA

Amount

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7"/9" to make free from dust, loose paint etc by skilled labour complete all as specified and directed.

M&L for water proof cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered/ old prepared painted surface of wall and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps:- Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3 :- Allow 6-8 hrs time to dry the putty surface.

M&L for one coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted)/ 10sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal / Anti Algai properties in two coats not less than 1.79 litre (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over primed surface with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed.

Note for item No. 1 to 4 :- The work for periodical services shall include the following and the rates quoted by the bidders shall include the same :- (a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like Exterior Emulsion paint, putty etc after approval by the GE. (b) The Contractor shall upload with the documents under cover I "Memoradum of Understanding" (MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. (c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures. (d) Removing of Nails, making good holes, cracks etc (e) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (h) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.

Taking down cement or cement lime plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed..

M&L for rendering 10mm thick on fair faces of wall even and smooth finish without using extra cement on conc/brick surfaces in CM 1:6, complete all as specified and as directed

M&L for preperation of new plastered surface and applying three coats of white wash on newly plastered surfaces of ceiling/wall complete all as directed.

M & L for preparation of existing surface of walls by brush, sand paper, surface repair required and applying 1mm putty on old plastered or un-plastered surface of wall/ceiling all as specified and as directed by the Engineer-in-Charge

M & L for applying two coat of oil bound distemper all as specified and as directed by the Engineer-in-Charge

M&L for preparation of existing surface of walls by brush, sand paper, surface repair if required , filling putty in holes etc and applying one coat of oil bound distemper white or any tint complete all as specified and directed.

M&L for preparation of old plastered or un-plastered surface of walls and applying one coat of white wash (lime) complete all as specified and directed .

M&L for preparation of old plastered or un-plastered surface of ceiling and applying one coat of white wash (lime) complete all as specified and directed .

M&L for preparation of old plastered surfaces and applying a coat of cement based paint on walls, facia , cornice, chajja upto 16 meter height of the bldg, complete all as specified and directed.

M&L for preparation of existing surface and applying two coats of cement based paint upto 16 meter height of the bldg, complete all as specified and directed.

M&L for preparation old treated surface of wall of OH Tank upto height of 12m to 18M and and applying a coat cement based paint including necessary scaffolding/ staging and formwork complete all as specified and directed complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of surfaces of walis by scrapping/sand preparing / rubbing and finally washing with watering and applying a coats of exterior emulsion lacyrlic weather proof antifungal paint over a coat of exterior grade arimer upto 16 meter height of the bldg, complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of surfaces of walis by scrapping /sand preparing / rubbing and finally washing with watering and applying a coats of interior emulsion acyrlic paint over a coat of exterior grade arimer, complete all as specified and directed.

M&L for preparation of existing surface and applying a coats of terracotta paint on walls, facia , cornice, chajja upto 16 meter height of the bldg, complete all as specified and directed.

M&L for preparing old or previously treated surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint to match the existing surfaces, complete all as specified and directed.

M&L for preparing old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for writing or repainting letters or figures (Block, Roman, Italic, Indian) exc 15cm but n.exc 30 cm in height and line of letters figures n.exc 2cm wide (Bldg No / Name ) etc with one coat of synthetic enamel paint all as specified and as directed.

S&F in repair 3 mm thick sheet glass, Ordinary quality and glazing in square n. exc 0.5 Sqm in each pane or glazing with oil glass putty including hacking out old broken glass(any thickness, size, quality or description) from wooden or steel frame surround complete all as specified and as directed

S&F, in repair galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of a-pertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed.

S&F in repair 3 to 5 mm thick transparent sheet glazing type, not exc 0.50 sqm in each pane fixed to wooden/ steel window fixed with oil putty/screw/woden beads complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and complete all as specified and as directed.

M&L 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement complete all as specified and as directed.

M&L, screed bed or bedding layer of mortar 15 mm thick in cement mortar 1: 6 to receive tiles etc finished rough complete all as specified and directed.

M&L for Vitrified Ceramic tiles 600x600mm, 8 -10 mm thick (square/ rectangular) polished, in floors etc.jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Vitrified Ceramic tiles 600x600mm, 8-10mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L non skid ceramic colour tiles 400x400mm, 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in colour cement to match as in floor complete all as specified and as directed

Material and labour for colour printed glazed ceramic tiles (300x 450mm / 300x600 6 to 7mm thick as in wall,dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed by the Engr-in-Charge.

Dismantling of asbestos/ CGI cement (corrugated, semi-corrugated) etc sheets in roof covering including ridges etc complete all as directed.

S & F for pre-painted galvalume aluminum zinc coating GI based double ribbed trapezoidal profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Notes for all items (i) Any CI/AC/PVC pipes or pipe fittings damaged during the process of work shall be replaced by new one without any extra cost to the department. The decision of the GE in this regard shall be final and binding. (ii) The debris including vegetation plant/trees shall be disposed off to a distance exc 0.5 Km and n.exe 1.00 K m all as directed by engineer -in charge. (iiI) For deciding the girth of the plant/tree the height shall be taken at 30 cm above the slab/wall. (iv) The labour employed by the contractor for carrying out the work shall be provided with safety equipment and quoted shall be deemed to include the same. (v) All windows, joineries, mirrors, fittings, doors etc. shall be covered before painting the surfaces and the same shall be cleaned including cleaning of floors as directed by the Engineer-in-Charge, failing which a recovery shall be done from the RAR as decided by Garrison Engineer and the quoted rate is deemed inlusive of these provisions.

RAVI TRADERS (BID ID -3384753)

M/S ANIL TRADERS (BID ID -3379390)

M/S PRAKASH RAIKWAR TRADERS & CO. (BID ID -3385517)

JAI BALAJI CONSTRUCTIONS (BID ID -3383978)