PROVISION OF RAIN WATER HARVESTING IN CHILDREN SCHOOL AND SPECIAL REPAIRS TO DRAINAGE LINE AND WASHING PLAT FORM AT AVS SOTT UNDER GE (N) AHMEDNAGAR

Amount

Excavation in trenches n.exc. 1.5m wide and n.exc 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 Sqm on plan and n.exc 1.5 m in depth and getting out in getting out in soft/loose soil etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 1 (here-in-before) bt exc 1.5m but not exc 3 m in depth

Returning, filling in, including spreading levelling including watering & well ramming in layers n. exc 25 cm any type of soil etc complete all as specified and directed by Engineer-in-Charge

Removing excavated material exc 250 m but n exc 500 m and depositing where direcrted at a level n.exc 1.50 m above the starting point etc complete all as specified and directed by Engineer-in-Charge

M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation, filling & mass concrete etc complete all as specified and directed by Engineer-in-Charge

M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B2 using 40mm graded stone aggregates as in benching / haunchig of manholes including forming channels including necessary formwork etc complete all as specified and directed by Engineer-in-Charge

M&L Rendering 10mm thick on any type of face of brick work in cement and sand mortar (1:4) and finished surfaces even and smooth using extra cement as specified including WPC etc complete all as specified and directed by Engineer-in-Charge Note : - (WPC shall be measured and paid seperately)

Supply only liquid water proofing compound etc complete all as specified and directed by Engineer-in-Charge

S&F Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole cover, and similar articles, exc 5 kg each etc complete all as specified and directed by Engineer-in-Charge

S&F UPVC pipe of 100mm dia single socketed with ruber ring joints and fittings, connected to Rain water pipe, laid in floor and taken upto rain water storage sump etc complete all as specified and directed by Engineer-in-Charge

M & L for broken stone or boulders Loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells etc complete all as specified and directed by Engineer-in-Charge

M & L for Shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering in soakage pits, soakage wells etc complete all as specified and directed by Engineer-in-Charge

M & L for sand filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled including watering in soakage pits, soakage wells etc complete all as specified and directed by Engineer-in-Charge

S & F 150 mm dia, 1.00 mm thick Mild steel sheet eaves gutters , galvanised class 3, half round with rounded edges etc complete all as specified and directed by Engineer-in-Charge

S & F 150 mm dia Angles (internal or external) or nozzle pieces (Out lets) made of 1.00 mm thick mild steel sheet galvanised class 3, etc complete all as specified and directed by Engineer-in-Charge

S & F 150 mm dia Drop ends (for spigot or socket ends) or nozzles made of 1.00 mm thick mild steel sheet galvanised class 3, etc complete all as specified and directed by Engineer-in-Charge

S & F 150 mm dia stop ends (for spigot or socket ends) made of 1.00 mm thick mild steel sheet galvanised class 3, etc complete all as specified and directed by Engineer-in-Charge

M&L for Composite Rain Water Harvesting System of 5000 Ltrs capacity etc complete all as specified and directed by Engineer-in-Charge Note :- The unit rates for Composite Rain Water Harvesting System include of the following Underground water storage tank of :- Respective capacity - 01 Piece First flush system - 01 Set Gravity Filter - 01 PC Delivery pipes 25 mm size - 15 Mtr Down take pipes 100 mm size - 15 Mtr

M & L for 150 mm bore casing pipe bore well and including Boring holes 15 m deep in hard soil / soft disintegrated rock and getting out and disposal of spoil to a distance of n exc. 50 m etc complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete (un-reinforced) blocks/RR walling built in cement mortar including coping etc ,of any description in any position etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering 15mm thick plaster on fair faces of brick work or concrete surfaces to be finished even and smooth (without using extra lime or cement in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge

M&L for PCC (1:2:4) type B1 using graded stone aggregate as in coping including necessary formwork, weatherig, slightly rounded or chamfered angle and throating etc complete all as specified and directed by Engineer-in-Charge

M&L for chequred cement concrete tiles 20X20X25mm thick set jointed & pointed in neat cement slurry in floor with grey cement & pigment over and including 15mm thick screed bed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), laid and jointed pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge

M&L preparation of New plastered surfaces of wall and applying two coats of cement base paint on wall etc complete all as specified and directed by Engineer-in-Charge

M&L for machine cut kota stone slab florring 20-25 mm thick over cement screed base laid over and including 15 mm thick screed bed in cement mortar 1:6, setand jointed with grey cement slurry mixed with pigment to match shade of the slab including rubbing and plishing complete all as directed.

S&F 75 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls all as directed.

M&L for form work to sides of concrete foundations, footings, bases of columns rafts and raft beams sides and sofits (if any) of foundation and plint beams and similar work in fair finished surfaces etc complete all as specified and directed by Engineer-in-Charge

M&L for RCC M25 design Mix using 20mm graded stone aggregate for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed by Engineer-in-Charge

M&L for Precast cement concrete block masonry with solid blocks, exc 10 cm in width and setting in mortar 1:4 type C1 (1:3:6) etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering 15mm thick plaster on wall in cement and sand mortar (1:6), fair faces of brick work or concrete surfaces, finish the surfaces even and fair etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering 15mm thick plaster on wall in cement and sand mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth with using sagol finish etc complete all as specified and directed by Engineer-in-Charge

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as specified and directed by Engineer-in-Charge

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and directed by Engineer-in-Charge

M&L for PCC 1:3:6 type C2 (using 40 mm graded agg) 75 mm thick as in plinth protection etc complete all as specified and directed by Engineer-in-Charge

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.06 Sqm but not exc 0.18 Sqm as in floor over and including 15 mm thick screed bedding in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles floor etc complete all as specified and directed by Engineer-in-Charge

M&L for glazed ceramic coloured tiles of size 350 x 250 x 7 mm thick on vertical surfaces such as dados over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etc complete all as specified and directed by Engineer-in-Charge

S&F factory made solid PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails frame shall be covered with heat moulded plain coloured PVC `C' channel having a PVC sheet strip of 20 mm width stuck and plain colour PVC sheets for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame etc complete all as specified and directed by Engineer-in-Charge

M&L for mild steel Butt hinges medium weight, cold rolled and fixed 125mm long etc complete all as specified and directed by Engineer-in-Charge

S&F Extruded aluminum alloy handles, cast type, anodized 150mm long etc complete all as specified and directed by Engineer-in-Charge

S&F 150 mm long aluminium anodised barrel tower bolt, of extruded sections etc complete all as specified and directed by Engineer-in-Charge

S&F 250 mm long aluminium alloy anodised sliding door bolt (bolt type), and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolt etc complete all as specified and directed by Engineer-in-Charge

M&L for two coats of Oil bound distemper on newly plastered surfaces of walls paint over 3mm thick wall care putty including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

M&L for prepraing new plastered surfaces of walls etc and applying two coats of acrylic antifungal paint over a coat of primer, etc complete all as specified and directed by Engineer-in-Charge

S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling etc complete all as specified and directed by Engineer-in-Charge

All as per item No 47 (here-in-before) but 20mm dia pipe.

Supply and fix rotational moulded polyethylene water storage tanks double layer ISI marked conforming to IS 12701-1996 (cylindrical vertical with closed top) and made out of virgin FDA approved polyethylene material of 1000 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting complete all as specified and directed.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore fixed as approved by GE / Engineer-in-Charge.

S&F ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 20mm dia bore pipe etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair bib tap, 15 mm bore CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule all as directed.Make:- (Cat part No MOR 1020 A(Orintal series) of MARC or equivalent make mentioned in list of makes in Appendix `C'.

Supply and fixing in repairs stop valve cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore Make:- (Cat part No MOR 1320(Orintal series) of MARC or equivalent make mentioned in list of makes in Appendix `'C.

S&F 110 mm dia PVC (SWR) bend any radius etc complete all as specified and directed by Engineer-in-Charge

S&F PVC SWR pipes single socketed in any length with rubber ring joints fixed to walls 110mm dia etc complete all as specified and directed by Engineer-in-Charge

S&F PVC (SWR) floor trap, 75 mm dia with grating including jointing with solvent cement etc complete all as specified and directed by Engineer-in-Charge

S&F 100mm dia of outer cast Iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) etc complete all as specified and directed by Engineer-in-Charge

Supply and fix tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs looking mirror of size 600 mm X450 mm etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No C 8606 Of Parryware or equivalent in Jaquar

Supply and fix in repairs wash hand basin vitreous China white, flat back type of size 550 X 400 mm pedastal type including pedastal, CP waste chain and plug and porcelain stopper, waste pipe, a pair of brackets,or errecting stand and PVC connection all as specified and directed. Make :- Cat Part No 10098 of Hindware or equivalent in Parryware / Cera.

Supply and fix PVC valveless, syphonic action type, flushing cistern,low level, all accesories all as directed. Make :- Sleek essence series Of Hindware or Cat part No E8303 of Parryware or equivalent in makes mentioned in list of makes in Appendix `C'.

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap all as directed. Make:-Petite series Cat part No C0287(S)/88(P) Incl seat cover Cat part No E8309 of Parryware or equivalent in makes mentioned in list of makes in Appendix `C'.

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including conncetion to flushing pipe and waste pipe providing and fixing plugs bedding urinal against wall etc complete all as specified and directed by Engineer-in-Charge

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

S&F 0.56mm plain alumunium sheeting alloy 31000 H4 in ridges, hip, valley gutter, drip and straight flushing (length and girth as fixed) etc complete all as specified and directed by Engineer-in-Charge

S&F Steel work in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St-240 etc complete all as specified and directed by Engineer-in-Charge

M&L for prepration of new steel surfaces over 10cm in width or girth & applying 2 coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed by Engineer-in-Charge

Material and labour for 60 mm thick, PCC pavers interlocking tiles of glossy finish, with grey cement any shape & size conforming to IS 15658 of 2006. M-35 grade made up with 12.5 mm graded mechanically crushed stone aggregates, factory made over and including 30mm thick sand cushioning and joints filled with fine sand including leveled with plate vibrator & sweeping etc complete all as specified and directed by Engineer-in-Charge

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and directed by Engineer-in-Charge NOTE: Wire cloth, glass, guard bars and painting shall be measured and paid separately under appropriate item of this BOQ

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, etc complete all as specified and directed by Engineer-in-Charge NOTE: Wire cloth, glass, guard bars and painting shall be measured and paid separately under appropriate item of this BOQ

M&L for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in Each pane etc complete all as specified and directed by Engineer-in-Charge

M&L for glazing with 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in Each pane etc complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel wire cloth 0.63 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples etc complete all as specified and directed by Engineer-in-Charge

Taking down carefully aluminium point wiring (light, fan, bell, socket, power point etc) with or without conduit, casing caping, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete and all as specified and directed by Engineer-in-Charge.

M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable drawn through and including PVC Casing and capping ISI Marked with necessary accessories with androvision of pressed steel terminal box powder coated of suitable size with 3 mm thick plastic laminated sheet by using CP machine screw for housing of switch / socket/regulators etc including 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth & connecting to earth dolly for the following :-

One light point controlled by one, one way switch single pole

One fan point controlled by one, one way switch single pole

One 3 pin 5 Amps socket out let on independent board.

One 3 pin 5 Amps socket out let on same board.

One bell point controlled by one bell push on independent board

All as per Item No 75 (here-in-before) but 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board

S&F Switch Piano Flush type 230/250 Volt, 5 Amps single pole one way, etc complete all as specified and directed by Engineer-in-Charge

S&F bell push, switch flush type, 5 Amps etc complete all as specified and directed by Engineer-in-Charge

S&F bell, AC, 230 volts single pole etc complete all as specified and directed by Engineer-in-Charge

S&F stepped type electronic fan Regulator flush type on the existing phenolic laminated etc, as reqd single pole 240 volts grade 100 watts heavy duty ISI marked etc complete all as specified and directed by Engineer-in-Charge

S&F switch socket combination multi purpose 2 in 1, 6 pin 5 Amps, flush type ISI marked etc complete all as specified and directed by Engineer-in-Charge

S&F switch socket combination 5 in 1, 5 Amps/15Amps, flush type ISI marked etc complete all as specified and directed by Engineer-in-Charge

S&F ceiling rose surface bakelite 65mm x 50mm three etc complete all as specified and directed by Engineer-in-Charge

S&F lamp holder PVC/Polycarbonate type with cord grip cap suitable for pendant fittings etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement double door Sheet metal enclosures factory made DBs 8 way, 240 volts protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 100 A copper Busbar, With Neutral bar, Earthbar and Cable lies for Cable management, Fully shrouded, Neutral bars, Prefitted masking sheet etc complete all as specified and directed by Engineer-in-Charge Make: Legrand, Cat No. : 507611 or equivalent in makes mentioned in list of makes in Appendix `C'

S&F Isolators of the under mentioned type and rating and fixing in DBs (DBs measured and paid for separately) Note :- Make of the isolator shall be the same as that of DB) for thre following :-

Supply & fixing MCB , SP, AC, 240 volts of 06 to 32 Amps, 10 KA Capacity, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge. Make: Legrand, Cat No. : 4085-87 to 90, 92, 93, 94, 95 or equivalent in makes mentioned in list of makes in Appendix `C'

Supply & fixing MCB, SPN, AC, 240 volts of 32-63 Amps, 10KA Capacity, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge. Make: Legrand, Cat No. : 4086-17 to 20 or equivalent in or equivalent in makes mentioned in list of makes in Appendix `C

Taking down Existing tube light fitting & Supply & fix LED tube light aling with fixture, 20W etc complete all as specified and directed by Engineer-in-Charge

M&L Earthing complete with galvanized earth plate electrode 600x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvenised earth lead wire of 4 mm dia by means of nuts, bolts, washes of galvanized iron or steel all as shown in electrical plate No 5 and testing on completion including adequate charcoal dust comman salt necessary excavation & earth work PCC(1:3:6) type C-1 pit with precast RCC Cover slab 40 mm thick in PCC(1:2:4) type B-0 reinforced with 6 mm dia MS bars @ 100 mm c/c both ways with funnel wire mesh and 20 mm dia GI pipe medium grade as watering pipe complete all as spfd and as directed. connected to earthing list point etc complete all as specified and directed by Engineer-in-Charge

M&L for sub main wiring with two runs of PVC insulated and unsheathed FRLS cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through existing conduit and 4 Sqmm single core multisranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire etc complete all as specified and directed by Engineer-in-Charge (Note : Two runs of conductor with one run of earth wire and PVC casing & capping will be measured & paid as one unit under relevant item of this BOQ)

Taking out old building security light (HPSV/Tube light fitting) & S&F LED bldg security light 30W IP 65 etc complete all as specified and directed by Engineer-in-Charge

Supply and fix heavy duty exhaust fan, 300 mm sweep, 900 RPM, 230 V, 50 Hz with fixing of fan duly grouted in bolts and connecting with 3 core flexible copper cable of size 1.5 Sqmm all as directed including making holes in wall/window etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 4,260.00 shall be deducted from BOQ on account of schedule of credit

M/s.Abhay Kulkarni and Associates

Siddhant Hukumchand kumath

M/s AG PATHAN

M/S-B.R.SONAWANE

TAKSHASHILA ELECTRICALS

M/s. Sagar Traders