Construction of Balance work for construction of Mehla Bhagiar Huraid Road km. 0/0 to 11/0 nder PMGSY -1 (batch -I) for the year 2017-18 package No HP-02-244

Amount

Clearing and grubbing road land including uprootng wid vegetations , grass bushes,shruves,sapling and trees of girth upto 300 mm (Three hundred milimetres) removal of stumps of such trees cut earlier and diposal of unserviceable material and stacking of serviceable material to be used or auctioned,upto any lead including removal of disposal of top organic soil not exceeding 150mm (One handred fifty milimetres ) in thickness as per MORD technical specification section 200 in area of non thorny jungle and area of thorny jungle as direction by the Engineer-in- Charge. including carriage of materials with in all leads and lifts and other incidental. The rate is including octroi, royality, malkana, toll tax,GST or other taxes imposed by the Government..

Setting out road alignment by construction reference pillars at 20 meter(Twenty metre) interval and at 10M(Ten meter) interval on sharp curves and 5m (five metre) spacing on hairpin bends, back pillars, in front of each reference pillar and job pillar shall be constructed at the two ends of the job including the Job No. and location, as per the MORD technical specification section 100 and 1600 and as per the approved drawings and design including hauling of material in all leads and lifts as per the entire satisfaction and directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate includes the octoroi, royality, malkana, toll tax ,GST or other taxes imposed by the Government.

Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/ mechanical means including saturated soil comprising of ordinary soil,ordinary rock, soft rocks, hard rocks, chiseling/wedging out of rock (where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the lines , grades, width,cutting and trimming of side slopes and level as shown in the drawing and as directed by Engineer-in –charge at site according to the MORD technical specification section 300 & 1600 and sorting out useful materials and stacking the same in all leads and lifts in acquired road width and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus material to approved dumping sites through all modes of transportation including head load or animal transport or mechanical means along with its leveling, fine dressing and carriage of machineries, materials, tools, equipments and safety measures and incidentals necessary to complete the work by mechanical means /labour if required. All useful material such as stones shingle aggregate and slates etcetra shall be sorted out and stacked in proper stack. Recovery of stones to the tune of 10128.39 Cubic metre quantity @ Rs 300/ -only (at the rate of rupees three hundred) only per cubic meters shall be effected from the contractor’s running bills on pro-rata basis as per actual quantity executed. Any loss to the public/ private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him in all cases.The rate is including the octroi, royality Malkana, toll tax , GST or any other taxes imposed by the Government.

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts drains and parapets etcetera in all type of classification of soil, comprising of ordinary soil, ordinary rock, hard rock chiseling/ wedging out rocks (where blasting is prohibited) as per growing and MORD technical specification section 300 and 1000 as per the directions of the Engineer-in-charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal of material up to any lead and lift including dressing of sides bottom and back filling in trenches with excavated suitable/ approved materials to the original surface in layers not exceeding 150mm (one hundred fifty millimeters) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) up to any depth and any quantum of water including cleaning of slush which may arise out during dewatering and as per direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including the octroi, royality Malkana, toll tax , GST or any other taxes imposed by the Government.

Providing and laying of boulder apron or gabion walls laid in wire crates with 4 mm (four millimetre) dia G.I (Galvanized iron) wire conforming to IS:280 (IS:two hundred eighty) and IS:4826 (IS:four thousand eight hundred twenty six) in 100 mm x 100 mm (one hundred millimetre into one hundred millimetre) mesh (woven diagonally) including 10 % (ten percent) extra for laps and joints laid with stone boulders weighing not less than 25 kg (twenty five kilogramme) each as per drawing and MORD technical specifications section 1300 and as per direction of Engineer-in-charge including the carriage of materials within all lead, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain /reinforced concrete Grade M-10 (M-ten) nominal mix 1:3:6 (one cement is to three sand is to six graded crushed stone aggregate 40mm(forty millimeter) nominal size on ground or under water and curing complete in open foundations for all type of structures and the like mat concretre,drain etcetera including pumping or bailing out water/dewatering surface and sub soil water and any quantum of water including removal of slush which may arise at the time of laying concrete complete for all heights/ depths including the cost of form work complete as per drawings and M.O.R.D technical specification section 800,900,& 1200 or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, Toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain concrete Grade M-15 (M-fifteen) nominal mix 1:2.5:5 (one cement is to two point five sand is to five graded crushed stone aggregate 40mm(forty millimeter) nominal size in or under water including pumping or bailing out water/ dewatering surface and sub soil water any quantum of water including removal of slush which may arise at the time of laying concrete complete upto any heights/ depths including the cost of form work and curing complete in parapet etcetera as per M.O.R.D technical specification as per section 800,900, and 1200 or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, Toll tax, GST or any other taxes imposed by the Government.

Providing and laying type -A concrete cradle Bedding ,with mechanically mixed and vibrated plain concrete grade M-15 (M-fifteen) design mix with cement contents not less than 275kg (two hundred seventy five kilogram) per cubic metre with 40mm (forty millimetre) nominal size on ground or under water including pumping or bailing out water/de-watering surface and sub soil water and any quantum of water including removal of slush which may arise at the time of laying concrete complete upto any heights/ depths including the cost of form work and curing complete as per Drawings and MORD technical specification section 800, 900 and 1100 or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, Toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure as per drawing and technical specification cement concrete mix design to obtain minimum compressive strength of grade M-25 (M-twenty five ) having cement contents not less than 400kg (Four hundred kilogram) per cubic meter crushed stone aggregate 20mm(twenty millimeters) nominal size in deck slab etcetera including cost of curing and form work complete but excluding the cost of reinforcement work as per drawing and MORD specification section 800,900 and 1400 and as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate includes the octroi, royality, Malkana, Toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanical mixed and vibrated reinforced cement concrete in sub structure as per drawing and technical specification cement concrete design mix to obtain minimum compressive strength of grade M-20 (M-twenty ) having cement contents not less than 350 kg (three hundred fifty kilogram) per cubic meter crushed stone aggregate 20mm(twenty millimeters) nominal size in bed block and wheel guard etcetera including cost of curing and form work complete as per drawing and MORD specification section 800,900 and 1200 and as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, Toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-30 (M-thirty ) design mix with cement contents not less than 430 kg (four hundred thirty kilogram) per cubic meter with 20mm (twenty millimeters) nominal size grade crushed stone aggregate in wearing coat including reinforcement, curing and form work complete as per drawing and MORD technical specification section 800, 900, 1000 and 1400 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, Toll tax, GST or any other taxes imposed by the Government.

Supplying,fitting and placing HYSD bar reinforcement in structure complete, bending ,binding and placing including the cost of binding wire as per drawing and MORD technical specifications section 1000 & 1400 and as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, Toll tax, GST or any other taxes imposed by the Government.

Construction of R.C.C railing Of M-25 (M-twenty five )grade concrete precast rails and part to be cast-in-situ with 20 mm (twenty millimetre) nominal size sggregate ,true to line and grade ,tolerance of vertical railing post not to exceed 1 in 500 (one in five hundred ) centre to centre spacing between vertical posts not to exceed 2000 mm (two thousand millimetre) as per drawing and MORD technical specifications section 800, 900, 1000, 1400 and 1700 and as per direction of Engineer-in-Charge within all leads, lifts and other incidental. The rate is including the octroi, royality, Malkana, Toll tax, GST or any other taxes imposed by the Government.

Coursed rubble masonry with hard stone of approved quality in Sub-structure in wing wall, abutment, toe walls etcetera, in cement mortar 1:4 ( One cement isto four sand) in or under water and including curing complete and pumping or bailing out water, dewatering removal of slush, which may arise at the time of masonry work on ground or under water complete for all height/ depths as per MORD technical specification section 700 & 1200 and as per the direction of Engineer-in-Charge including carriage of materials within all leads and lift and other incidental. The rate includes the octroi, royality, Malkana, Toll tax, GST or any other taxes imposed by the Government.

Coursed rubble masonry with hard stone of approved quality in Sub-structure in wing wall, abutment, toe walls etcetera, in cement mortar 1:5 ( One cement isto five sand) in or under water and including curing complete and pumping or bailing out water, dewatering removal of slush, which may arise at the time of masonry work on ground or under water complete for all height/ depths as per MORD technical specification clause 700 & 1200 and as per direction of Engineer-in-Charge including carriage of materials within all leads and lift and other incidental. The rate is including the octroi, royality, Malkana, Toll tax, GST or any other taxes imposed by the Government.

Random rubble dry masonry with hard stone of approved quality for retaining wall, abutment, toe walls etcetera for dry for all height/ depths for all type of structure as per MORD technical specification section 700 and 1200 as per the direction of Engineer-in-Charge including carriage of materials within all leads,lifts and other incidentals. The rate is including the octroi, royality, Malkana, Toll tax, GST or any other taxes imposed by the Government.

Providing and laying (to level or slope) 900mm dia (nine hundred millimeter) diameter reinforced cement concrete heavy duty non pressure pipes IS class NP-2 for culverts on first class bedding or granular material in single row including fixing collar with cement mortar 1:2 (One cement isto two sand)but excluding the cost of excavation, protection works, back filling, concrete and masonry work in head walls and parapets as per drawing and MORD technical specifications section 1100 and as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rate is including the octroi, royality, Malkana, Toll tax, GST or any other taxes imposed by the Government.

Back filling behind abutments, return walls, wing walls and retaining walls etcetra complete as per drawings and MORD technical specification section 1200 and 1600 or as directed by the Engineer-in-Charge ,including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality ,Malkana, toll tax, GST or any other taxes imposed by the Government

Construction of unlined surface drain in all kinds and classification of soil average cross sectional area 0.40 square meters in soil to specified lines, grades, levels and dimension. Excavated material to be used embankment with any lift and lead as per MORD technical specification section 300 including carriage of material within all leads, lift and other incidental and the entire satisfaction and direction of Engineer-in-charge.The rate is including the octroi, royality, Malkana, Toll tax, GST or other taxes imposed by the Government.

Providing and fixing of typical PMGSY informatory sign board with logo as per M.O.R.D. specification and drawing. Three MS plates of 1.6 mm (one point six millimeter) thick top and middle plate duly welded with MS flat iron 25mmx5mm (twenty five millimeters into five millimeters) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm (twenty five millimeter into twenty five millimetres into five millimeter). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 Nos. (Two Nos.) 75mmx75mm (seventy five millimeter into seventy five millimeters) of 12 SWG ( twelve standard wire gauge) sheet tubes posts duly embedded in cement concrete M-15 ( M fifteen) grade blocks of 450mmx450mmx600mm ( four hundred fifty millimeters into four hundred fifty millimeters into six hundred millimeters), 600mm ( six hundred millimeters) below ground level. The top most diamond plate will be welded to middle plate by 47mmx47mm (forty seven millimeter into forty seven millimeters) of 12 SWG (twelve standard wire gauge) steel plate tube All MS will be stove enamel on both sides. Lettering and printing, arrows, borders etcetera will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing and M.O.R.D. technical specifications clause 1700 and Annexure 1700.1 and as per direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidential . The rate includes octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Providing reinforced cement concrete M-15 grade nominal mix 1:2½ :5 (One cement:two&half sand:five graded crushed/broken stone aggregate 40mm nominal size curing complete in 5th (fifth Kilometre) stone precast of strandard design as per IRC, 8(eight )fixing in position including painting and printing etc as per drawing and MORD technical specification section 1700 including carriage of material within all leads, lift and other incidental and the entire satisfaction and direction of Engineer-in-charge . The rate including the octroi, royality, Malkana, Toll tax, GST or other taxes imposed by the Government

Providing reinforced cement concrete M-15 grade nominal mix 1:2½ :5 (One cement isto two&half sand isto five graded crushed/broken stone aggregate 40mm (forty millimetre) nominal size curing completein ordinary ( precast) of strandard design as per IRC, 8(eight )fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 including mechanically mixed and vibrated ordinary kilometer stone precast including carriage of material within all leads, lift and other incidental, the entire satisfaction and direction of Engineer-in-charge. The rate including the octroi, royality, Malkana, Toll tax, GST or other taxes imposed by the Government

Providing reinforced cement concrete M-15 grade nominal mix 1:2½ :5 (One cement isto two&half sand isto five graded crushed/broken stone aggregate 40mm nominal size curing complete boundary pillars /local stone of strandard as per IRC, 25 (twenty five )fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 including carriage of material within all leads, lift and other incidental, the entire satisfaction and direction of Engineer-in-charge. The rate is including the octroi, royality, Malkana, Toll tax, GST or other taxes imposed by the Government

MCC POWER PROJECT PVT. LTD.