ROAD REPAIR NEW KERBSTONE FIXING AND PLATFORM CONSTRUCTION AT A C D, HAL HC BANGALORE

HINDUSTAN AERONAUTICS LIMITED BANGALORE AEROSPACE COMPOSITES DIVISION

NAME OF THE WORK: “ROAD REPAIR , NEW KERBSTONE FIXING AND PLATFORM CONSTRUCTION AT A C D, HAL(HC) BANGALORE.." CONTRACT NO. HAL/ACD/R-162/2024

Name of the Tenderer:

Sl. No Specification Quantity Unit Rate in Figs [Excluding GST] Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The tenderer shall abide by prevailing GST act. (2) This BOQ specifications have to be read in conjunction with detailed technical specification and tender drawings if any. (3) The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered. (4) The quoted percentage for the works mentioned below, shall be taken into consideration for evaluation of the tender. The lowest offer (L-1) will be determined considering the total amount including GST based on the quoted percentage.

1 Demolishing cement concrete Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge 3.00 Cum 2236.42 6709.25

2 Demolishing brick work In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 14.00 Cum 1892.77 26498.71

3 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 14.00 Cum 9295.33 130134.63

4 Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete. 53.00 Sqm 811.38 43002.89

5 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 19.00 Cum 6258.38 118909.23

6 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from naturalsources : 4 graded stone aggregate 20 mm nominal sizederived from natural sources) 25.5 Cum 7238.20 184574.23

7 Disposal of moorum/earth/building rubbish/ malba/ similar unserviceable,GI sheets,Aluminium windows, wooden doors, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, all complete as per directions of Engineer-in-charge. 3 Cu m 453.94 1361.83

8 Providing and laying C.C. of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). 26 Cum 9025.41 234660.61

9 Supplying, straightening, fabricating and fixing steel reinforcement of HYSD TMT bars of not less than Fe 500 conforming to IS 1786 for all concrete reinforcment members / works including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.9 mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Note : Only authorized laps, chairs etc. shall be considered for measurement. 2321.00 Kg 98.40 228376.78

10 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 137 Sqm 1002.79 137382.57

80 mm thick C.C. paver block of M-35 grade with approved color design and pattern.

Sub-Total (Excluding GST) 1111610.74

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 1111610.74 ABOVE % 1111610.74

Grand Total (Including GST) 1311700.67

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

ESTIMATION FOR ROAD WORK WITH ALIED CIVIL WORKS NEAR STORE , Falceiling at CTM shop and minor toilet repair work at CTM & Tool storage.

Sl No. Description Unit Final Qnty Rate Incl GST. As per DSR 2023 Cost Index over DSR 2023 as on 25.08.2024 Cost Index Multiplying Factor Rate Incl Cost index & GST Rate(in Rs) Excl. GST Amount (in Rs) Excl. GST

B C D E F G H I J

H=E*G I=H/1.18 J=I*D

1 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge. Sqm 71.00 129.85 108.41 1.0841 140.77 119.30 8470.08

2 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. 15.00 196.00 108.41 1.0841 212.48 180.07 2701.06

3 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing etc., (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m with all labour, tools & tackles, plant & machinery, hire & fuel charges etc.,all complete as directed by Engineer-incharge. 36.00 177.50 108.41 1.0841 192.43 163.07 5870.68

4 Demolishing cement concrete of any description in grades (1:3:6) or rich mix manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge 15.00 2434.25 108.41 1.0841 2638.97 2236.42 33546.23

5 Supplying, mixing and placing in position plain cement concrete 1:4:8 (1 cement : 4 sand : 8 graded aggregate of 40 mm nominal size) including Vibrating/consolidation and curing for plinth, cills, bed blocks and coping etc all complete as directed by Engineer-In-Charge. Cum 15.00 5205.25 108.41 1.0841 5643.01 4782.21 71733.20

6 Supplying, fabrication and fixing in position as per approved make and design TMT bars as reinforcement cut to length, bent to shape required, cranking, hooking ends etc., including binding with (soft drawn) MS wire etc., for all works above and below the plinth level all complete as directed by Engineer-in-Charge. Kgs 917.00 107.85 108.41 1.0841 116.92 99.08 90860.86

7 Providing and laying (RMC) design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) or suitable size by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Cum 20.00 11098.45 108.41 1.0841 12031.83 10196.47 203929.32

8 Providing and filling in position rubberized bitumen hot sealing compound for sealing for dummy joints/ expansion joints/contraction joints in roads / pavements all complete as per direction of the Engineer-in-Charge. The rate shall include for cleaning the joints, providing backer rod in the joint, application of primer in the joints and sealent shall be of 10mm i.e 1cm (W) X 10mm i.e 1cm (D). All Complete. per cm depth per cm width per metre length 38.00 8.65 108.41 1.0841 9.38 7.95 301.99

9 Form work by providing Timber / M.S sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways dressing with oil including M.S bolts nuts and washers, temporary openings filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including removing the same from the site after completion of work, etc., complete all as directed for following works. (Form work material contractors own property and shall be removed after completion of work. For edges of concrete flats, breaks in floors, openings in concrete walls/floors/roofs and sides of RCC/PCC bands in walls, drain wall, horizontal or sloping. sqm 13.00 961.30 108.41 1.0841 1042.15 883.17 11481.26

10 Brick work with common burnt clay machine moulded modular bricks of class designation 12.5 in exposed brick work(200mm/100mm) thick above plinth level including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand). Cum 12.00 6997.40 108.41 1.0841 7585.88 6428.71 77144.56

11 Plastering to external brick/block wall with 18 mm cement plaster in two coats under layer 12 mm thick cement plaster on the rough side with cement mortor 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).including leveling,curing and making the level smooth and at all heights, work complete as per direction of Engineer-in-charge. Sqm 192.00 518.55 108.41 1.0841 562.16 476.41 91470.11

12 Providing and laying Non Pressure NP-4 class (Heavy duty) 450 mm dia R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete Meter 12.00 3053.55 108.41 1.0841 3310.35 2805.38 33664.61

13 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture Sqm 558.00 226.25 108.41 1.0841 245.28 207.86 115987.22

14 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth

Providing and laying in position cement concrete of grade 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal sizederived from natural sources) etc complete as directed by EIC. Cum 12.50 7878.50 108.41 1.0841 8541.08 7238.20 90477.56

15 Disposal of surplus earth/moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material of partitions,ceiling boards,tiles,frames etc by mechanical transport including loading, transporting, unloading in all lifts/loads upt 10 km distance from HAL. completely as per directions of Engineer-in-charge. Cum 6.00 494.1 108.41 1.0841 535.65 453.94 2723.66

16 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. Sqm 44.00 56.35 108.41 1.0841 61.09 51.77 2277.90

17 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising@ 120 grams per sqm including both side) consisting of main 'T runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre,and cross "T" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main'T' at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steelof size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main 'T' runners to be suspended from ceiling using G.l. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.l. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main 'T. Bottom exposed with 24 mm of all T-sections shall be pre-painted with polyster baked paint, for all heights,as per specifications, drawings and as directed by Engineer-in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK. Sqm 44.00 2158.15 108.41 1.0841 2339.65 1982.75 87241.20

18 Providing and fixing 25 mm diaa Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints,clampimping where ever required complete as per direction of Engineer in Charge. RMT 566.00 355.40 108.41 1.0841 385.29 326.52 184808.18

19 Providing and fixing 25 mm dia gun metal gate valve with C.I. wheel of approved quality (screwed end) :etc. complete as directed by EIC. each 8.00 622.40 108.41 1.0841 674.74 571.82 4574.53

20 Providing and fixing 15mm nominal bore dia C.P. brass bib cock of approved quality conforming to IS:8931, all complete as directed by the Engineer-in-Charge. Each 8.00 506.8 108.41 1.0841 549.42 465.61 3724.89

21 Providing and fixing to existing door frames,37 mm thick factory made PVC door shutter, all as per manufacturer's specification etc complete as directed by EIC SQM 1.60 4362.00 108.41 1.0841 4728.84 4007.50 6411.99

22 Providing and fixing pvc low level flushing cistern with 10 liter capacity white colour and manually controlled device (handle lever) confirming to IS: 7231, with all fittings and fixtures complete as directed by EIC Each 4.00 1190.65 108.41 1.0841 1290.78 1093.88 4375.54

23 Providing and fixing C.P. brass long body bib cock of approved quality 15 mm nominal bore conforming to IS standards and weighing not less than 690 gms. Each 6.00 798.95 108.41 1.0841 866.14 734.02 4404.11

24 Providing and fixing PTMT 100 mm nominal dia grating of approved quality, colour and Circular type etc complete as directed by EIC. Each 7.00 37.60 108.41 1.0841 40.76 34.54 241.81

25 Supplying, of MONOBLOCK PUMP, having 1 HP single Phase, 50 Hertz Frequency, 1 kiloWatt Power rating, 240 Volt Power source Voltage. The pump make may be like Kirloskar/CRI/ Texmo make or any other approved make ISI marked/approved (Pump to be got approved by HAL before procurement/ execution).etc complete as directed by EIC Each 1.00 4899.36 4152.00 4152.00

26 Errection and commissioning of 1.H.P MONOBLOCK PUMP etc complete as directed by EIC Each 1.00 1959.74 1660.80 1660.80

27 Spplying and fixing of 1 inches pvc foot valve etc complete as directed by eic( Supply Rs 165.00 and fixing @ 40% on Rs 165.00) Each 1.00 224.00 189.83 189.83

28 Supplying and fixing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) including scafolding etc complete as directed by EIC. Sqm 10.00 1090.65 108.41 1.0841 1182.37 1002.01 10020.12

29 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets embedded in cement mortar (1:3), connecting the waste pipe to floor trap with all necessary fittings and accessories like 32 mm dia semi-rigid PVC waste pipe(concealed in the wall) including dismanteling of existing urinals,PVC waste fittings, clamps etc all as per manufacturers specification and direction of Engineer-in-charge. Each 4.00 8083.1 108.41 1.0841 8762.89 7426.18 29704.71

30 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) of approved brand with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all connecting fittings and fixtures to make it operational completely, including dismanling the existing WC ,cutting and making good to the walls and floors wherever required complete as per direction of Engineer-in-charge. Each 1.00 6649.65 108.41 1.0841 7208.89 6109.23 6109.23

31 Supplying and fixing of PVC connector 15mm size of length 450 mm etc. complete as directed by EIC. Each 6.00 121.90 108.41 1.0841 132.15 111.99 671.96

32 Providing and fixing beveled edge mirror of size 600x450mm of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 4 1607.95 108.41 1.0841 1743.18 1477.27 5909.08

33 Dismantling of flushing cistern and water closet of all types and sizes (C.I./PVC/Vitroeous China/ urinlas/ IWC/ EWC/ hnad wash basin ) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead Nos 2 246.15 108.41 1.0841 266.85 226.15 452.29

34 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.

Orissa pattern W.C Pan of size 580x440 mm Each 1.00 4478.75 108.41 1.0841 4855.41 4114.76 4114.76

35 Providing and fixing 8 mm dia C.P. / S.S. Jet (Health Fuacet) with flexible tube upto 1 metre long with S.S. triangular plate on walls/Eureopean type W.C. material of approved make and quality all as per instructions of Engineer - in - charge. Each 8.00 349.15 108.41 1.0841 378.51 320.77 2566.19

HINDUSTAN AERONAUTICS LIMITED

AEROSPACE COMPOSITES DIVISION

Pre-Qulification Profile (To Be uploaded along with Technical Bid PART A)

Tender Ref No. or Contract No.: HC/DGM(Maint.)-ACD/TN-110/2024

Name of Work: ROAD REPAIR , NEW KERBSTONE FIXING AND PLATFORM CONSTRUCTION AT A C D, HAL(HC) BANGALORE.

Estimated Amount in Rs: 13,11,701 /-

Tender Notice Date: 16.12.2024

Sl.No Description Details Enclosed / Not Enclosed Remarks

1 Name of the Individual / Firm / Company: * Mandatory

2 Type of ownership

If Other, please specify

3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc., Related Document to be Uploaded to eProcurement Portal

4 Address for correspondence:

5 PAN No.: Related Document to be Uploaded to eProcurement Portal

6 Contact details

Contact person name

Ph. No. with STD code

FAX No. with STD code

7 Registered Contractor

If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs

Registration No.

PEMD Amount ( If paid )

8 I.T Returns for past 03 years

2023-24 Related Document to be Uploaded to eProcurement Portal

9 Average annual financial turn over during the last 3 years, ending financial year 31st March 2024 [ should not be less than 30% of Amount put to tender]

YEAR TURN OVER IN Rupees Enclosed / Not Enclosed REMARKS

2023-24 Audited Report duly certified by the Auditor to be enclosed to support the turn over

Average annual Financial turn over 0.00

10 ESI & PF Nos and GST Nos. with proof Nos Enclosed / Not Enclosed

ESI Registration No. with proof Related Document to be Uploaded to eProcurement Portal

PF Registration No. with proof if any

GST Registration No. with proof

11 Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Name of the Bank

Type of Account

12 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the final date of submission of tender.

Name of Bank & Branch Related Document to be Uploaded to eProcurement Portal

13 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Completed similar works during last 7 years

Work No I Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal.

Brief Description of Work: Please Enter details for Work No 1

Completed value of Work in Rs. Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal

Brief Description of Work: Please Enter details for Work No 2

Completed value of Work in Rs. Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal

Brief Description of Work: Please Enter details for Work No 3

Completed value of Work in Rs. Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

14 Details of person holding the power of Attorney (If different from contact person)

Name Related Document to be Uploaded to eProcurement Portal

Ph. No. with STD code

FAX No. with STD code

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions ( Page 1 to 156) including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and award of work.

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Related Document to be Uploaded to eProcurement Portal