SPECIAL REPAIRS TO SHAFTS AND TOILETS IN BLDG No T42 B ARJN DIVISION AND P49 AKBAR DIVISION AT INS CHILKA

Amount

Demolition of un reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish complete all as specified and directed.

Demolition of reinforced concrete (other than ground floors) as in roofs, floors, suspended slabs, beams, lintels,landing, chajjas and similar suspended work, etc (reinforcement cut as required to facilitate demolition) and removing rubbish complete all as specified and directed.

M&L PCC (1:5:10) type E2 (using 40mm graded stone aggregate) as in filling in sunken floors,complete all as specified.

M&L 25 mm thick PCC (1:2:4) type B-0, (using 12.5mm graded stone aggregate) as in sub base (sunken floor) complete all as specified and directed.

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars, etc., and precast concrete articles and removing rubbish off the premises complete all as specified and as directed.

M&L Brickwork with using old size flyash bricks straight or curved on plan exc 6m mean radius, built in cement morter 1:6 complete all as specified.

M&L Brickwork with using old size flyash bricks straight or curved on plan any radius, in half brick thick walls built in cement morter 1:4 complete all as specified.

Taking down cement plaster on brick or stone wall etc including ranking out joints hacking for keys scrubbing down with water etc complete all as specified.

M&L for rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified.

M&L for rendering two coats, first coat 10mm thick in cement mortar 1:6 and 2nd coat 5mm thick in cement mortar 1:4 with water proofing compound on external wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified. (Note : Supply only approved water proofing compound shall be measured and paid separately under relevant item)

M&L for rendering 10mm thick in cement mortar 1:6 on internal wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for rendering 10mm thick in cement mortar 1:4 by using water proofing compound on concrete surfaces of sunken floors, finished even and smooth without using extra cement complete all as specified.(Note : Supply only approved water proofing compound shall be measured and paid separately under relevant item)

Supply only water proofing compound complete all as specified.

M&L Water proofing treatment to sunken floors using Shalicem EWP of make STP limited having two component of packing 50 Kg (34 Kg powder and 16 Kg liquid) cementitious elastomeric water proof coating in two layers @ 2.50 Kg per sqm in each layer to achieve 1.50 mm thickness including preparation of sunken portion slab surfaces by removing all loose particles and sharp projection,etc complete all as per manufacturers instructions,as specified and directed.

M&L Preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing teatment of plastered surfaces and applying two coats of white wash on ceilings complete all as specified and directed.

M&L Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing teatment of plastered surfaces and applying two coats of white wash on walls complete all as specified and directed.

M&L Preparation of new plastered surfaces of walls and applying two coats of weather proof exterior acrylic emulsion paint exterior grade (100% acrylic) over a coat of primer as per manufacturers instructions,complete all as specified and directed. Note: The shade shall be of silver sterak any colour as approved by GE.

M&L Preparation of od plastered surfaces of walls and applying two coats of weather proof exterior acrylic emulsion paint exterior grade (100% acrylic) as per manufacturers instructions,complete all as specified and directed. Note: The shade shall be of silver sterak any colour as approved by GE.

M&L RCC (1:2:4) type B1 ( using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in foors, roofs, landings,balconies, canopies,shelves and the like complete all as specified.

Use and waste of form work to sides and soffits of slabs, floors, roofs, beams, lintels, cantilevers,etc and similar work for rough finished surface of concrete complete all as specified.

M&L for Mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for column hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.

All as per Item No.23 above but 5 mm dia and over up to and including 10 mm dia in stirrups,spacers and binders,etc, complete all as specified.

Dismantling floor, hearth or wall tilling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for Non skid ceramic tiles coloured 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L 15 mm thick screed bed with cement mortar 1:4 for laying tiles complete all as specified.specified.

M&L Glazed colured ceramic tiles of size 300 mm x 200 mm, 6 to 7mm thick as in vertical surfaces such as skirting, dado,etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L 10 mm thick CM 1:4 as in rendering or backing coat for tiles complete all as specified.specified.

Taking up or down 15 mm bore steel tubing and connections including cleaning complete all as directed.

All as per Item No.30 above but 20 mm bore complete all as directed.

All as per Item No.30 above but 25 mm bore complete all as directed.

All as per Item No.30 above but 32 mm bore complete all as directed.

All as per Item No.30 above but 40 mm bore complete all as directed.

Refixing of 15 mm bore steel tubing and connections of any grade to walls/ ceilings/ laying in floors,etc complete all as directed.

All as per Item No.35 above but 20 mm bore complete all as directed.

All as per Item No.35 above but 25 mm bore complete all as directed.

All as per Item No.35 above but 32 mm bore complete all as directed.

S&F GI water tubing 15mm bore, medium grade ISI marked including all fitings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, celling or laid on floors complete all as directed.

All as per Item No.39 above but 20 mm bore complete all as directed.

All as per Item No.39 above but 25 mm bore complete all as directed.

All as per Item No.39 above but 32 mm bore complete all as directed.

All as per Item No.39 above but 40 mm bore complete all as directed.

S&F Vitreous China wash down water closet pan,semi pedestal pattern (Anglo indian type), connection to drain and flushing pipe, fixing bolts,etc as fixed in repairs complete all as directed.

S&F White colour plastic water closet seat closed pattern with flat bottom and cover with mild steel chromium plated or aluminised hinging device fixed to anglo indian type WC, as fixed in repairs complete all as directed.

S&F 25 mm dia CP flush cock push type as fixed in repairs complete all as directed.

S & F Brass chromium plated shower rose 125 mm size with swivel joint fixing to GI pipe of 15 mm dia including CP shower arm as fixed in repairs,complete all as directed.

S&F 15 mm dia stop valves, cast copper alloy,fancy type, chromium plated screwed down high pressure with crutch or butterfly handle with long shank and cup (concealed type) screwed both ends for iron pipe or for unions as fixed in repairs complete all as directed.

S&F 25 mm dia stop valves, cast copper alloy ,screwed down,high pressure with crutch or butterfly handle,screwed both ends for iron pipe or for unions as fixed in repairs complete all as directed.

S&F 32 mm dia stop valves, cast copper alloy ,screwed down, high pressure with crutch or butterfly handle,screwed both ends for iron pipe or for unions as fixed in repairs complete all as directed.

S&F 15 mm dia,bib taps, fancy type,CP, screwed down screwed for iron pipe or for brass ferrule and as fixed in repairs complete all as directed.

S&F Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum wt 300 grams) complete all as directed.

M & L for 75 mm PVC (SWR) floor trap with grating including jointing with solvent cement jointed to waste pipe as fixed in repairs complete all as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary clamps as fixed in repairs complete all as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary clamps as fixed in repairs complete all as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors as fixed in repairs complete all as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors as fixed in repairs complete all as directed.

S&F 110 mm bore PVC (SWR) bends with acess door of any radius as fixed in repairs complete all as directed.

S&F 75 mm bore PVC (SWR) bends with acess door of any radius as fixed in repairs complete all as directed.

S&F 110 mm bore PVC (SWR) double "Y " junction as fixed in repairs complete all as directed.

S&F 75 mm bore PVC (SWR) double "Y " junction as fixed in repairs complete all as directed.

S&F PVC (SWR) reducer 100/75 mm bore as fixed in repairs complete all as directed.

S&F 110 mm bore PVC (SWR) junction single T equal or unequal as fixed in repairs complete all as directed.

S&F 75 mm bore PVC (SWR) junction single T equal or unequal as fixed in repairs complete all as directed.

S&F 110 mm bore PVC (SWR) Vent cowl as fixed in repairs complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as directed.

Taking down PVC door frames n exc 1.5 sqm each complete all as directed.

Taking down and refixing of PVC door shutter in the same opening of any description exc 1.00 sqm but n.exc 2.00 sqm each complete all as directed.

S & F Powder coated aluminium anodised (minimum thickness of powder coating 50 micron) side hung shutters, glazed and mosquitto proof shutters, frame,central mullion including necessary joining cleats, glazing clips by using jindal sections 20509, 19360,19533 and 20087 and fixing the shutters to frame with 2 Nos of stainless steel friction hinges of SS-302 grade, glazing with 5 mm thick sheet glass fixed to Z section with suitable EPDM rubber beading and mosquitto proof wire cloth of stainless steel 0.45 mm dia and 1.40 mm aperture fixed with aluminium flat and screws along with powder coated aluminium grill with aperture of size 60x60 mm securing with suitable aluminium channel to frame including 02 Nos of tower bolt of 100 mm long,01 No. handle of cast type,flat of 100 mm long made out of aluminium sheet (all iron mongry shall be powder coated) complete all as specified and directed. Make: Jindal or equivalent sections in Hindalco/Indalco/Ajit India Pvt Ltd.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F 150 mm long aluminium handles, cast type, anodised complete all as specified.

S & F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified.

S & F 100 mm long cold rolled mild steel medium weight butt hinges complete all as specified.

RCB CONSTRUCTION

HARI HARA NAYAK

ANIL KUMAR BISWAL

ANTARYAMI PANDA AND COMPANY

M/S JAGANNATH SASMAL

HARI PALAI

ABHIMANYU MAHARANA