8253 SPECIAL REPAIRS TO BLDG NO SR-41 AND ET-44 OF 41 ADSR UNDER GE (CENTRAL) PUNE

Amount

Demolition of unreinforced concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing rubbish off the premises complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing unserviceable tiles and rubbish off the premises complete all as directed.

Taking down chowkat or frame with shutter n exc 1.5 sqm each including removing from site complete all as directed.

Dismantling of AC sheet corrugated, or semi corrugated in roof covering and removing from site complete all as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and removing from site complete all as directed.

Taking down cement plaster of any decription and removing rubbish off the premises complete all as directed.

Dismantling of structural steel work including doors,gates but excluding framed Truss etc complete and removing from site complete all as directed.

M&L for PCC type B1 1:2:4 (using 20mm graded aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, all as specified and directed.

M&L for precast cement concrete block masonry exceeding 10cm in width witth solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6 complete all as specified and directed.

S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guage complete all as shown in SSR 2020 Part II complete all as specified and directed.

S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide stuck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in SSR 2020 part II.

S&F 100 mm long stainless steel butt hinges complete all as specified and directed.

S&F 150 mm long aluminium anodised barret tower bolt complete all as specified and directed

S&F 150 mm long aluminium anodised alloy handle, fabricated type complete all as specified and directed.

S&F fixed glass louvered ventilators using 5mm thick pin headed glass and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed. (a) SP - 20048 (b) Glazing clips - 19352. complete all as specified and directed

M&L for 9 mm thick one side laminated gypsum ceiling board for false ceiling on and including aluminium powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.28 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 4.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm and finishing the surface with three coats of white wash complete all as specified and directed

M&L pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

M&L pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, bent to shape as required and directed fixed with self tapping screws all as specified and directed

S&F MS framed work as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded aggregate) as in levelling coarse complete all as specified and directed

M&L for 20 to 25mm thick machine cut Kota stone (550 x 550 mm) flooring over and including 15 mm thick cement screed bed in cm (1:6) laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified and directed

All as per item No 21 here-in-before but (100/150mm x 550mm) and 20-25mm thick kota stone in riser of steps, skirting , dados and pillar laid over and including 10mm thick rendering to receive the stone in cement mortar 1:3 and jointed complete all as specified and directed

M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in cement mortar 1:6 complete all specified and directed

M&L for coloured designer glazed ceramic tiles of size 300x600x7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L rendering 15 mm thick on stone masonry surfaces or other than fair faces of brick work in CM 1:6 including finishing the surface even and smooth without using extra cement completed all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on brick/ stone surfaces finished even and smooth with spong finish complete all as specified and directed

M&L for preparation of newly plastered surface of wall and applying three coats of white wash complete complete all as specified and directed

M&L for preparation of newly plastered surface of wall and applying two coats of cement based paint over a coat of primer of same make over external wall surface complete all as specified and directed

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer of same make over 2 mm thick wall care putty, to obtain the true line to achieve smooth surface complete all as specified and directed

M&L for preparation of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint of any colour over a coat of red oxide zinc chrome primer complete all as specified and directed

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of any colour complete all as specified and directed

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of any colour complete all as specified and directed.

S&F 15 mm bore GI medium grade steel tubing and connection including cutting chases for concealed not exc 10 cm girth and making good in cement mortar (1:3) including taking up or down old u/s steel tubing complete all as specified and directed.

All as per item No 33 here-in-before but 20 mm bore.

S&F in repairs 15mm bore chromium plated bib cock fancy type complete all as specified and directed.

S&F in repairs 15mm bore chromium plated angle cock fancy type complete all as specified and directed.

S&F in repairs 15 mm bore chromium plated concealed stop cock fancy type complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete all as specified and directed

S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mmx440kmm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap with and including PVC valveless, syphonic action type flushing cistern 10 liters capacity, low level, white with inlet, ball valve, float and handle in cluding brackets and flush pipe of polyethylene or PVC 32mm dia, for low level cistern etc. including making good to floor, complete all as specified and directed

S&F in repair vitreous china pedestal pattern, water closet pan, white including cast iron 'P' or 'S' trap, seat cover and jet spray and connection to trap, with and including PVC valveless, syphonic action type flushing cistern 10 litres capacity, low level, white with inlet, ball valve, float and handle with brackets and flush pipe of polyethylene or PVC 32mm dia, for low level cistern, etc. including making good to floor, complete all as specified and directed.

S&F 15 mm bore PVC connection pipe 450 mm long complete all as specified and directed

M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, in PVC casing caping 25mm wide heavy duty ISI marked including all accessories etc. with PVC modular boxes including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly including taking down old u/s point wiring complete all as specified for the following:-

i) one light/fan point controlled by one way switch.

ii) One three pin 5 Amps socket outlet point controlled by one No one way switch on same board.

iii) One three pin 5 Amps socket outlet point controlled by one No one way switch on independant board.

(iv) All as per item no. 42 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 amps socket outlet point on independent board. Note:- Making good of disturbed surfaces will be done by contractor without any claims.

S & F for Modular switch 6A SP one- way 230 V ivory finish complete all as specified and directed

S & F for Modular switch 16A SP one- way 230 V complete all as specified and directed

S & F of modular socket outlet 2/3 pin 6 amps, multipurpose 2 module 230volts single pole one way suitable for plug tops,complete all as specified and directed

S & F of modular socket outlet 2/3 pin 16 amps, multipurpose 2 module 230volts single pole one way suitable for plug tops,complete all as specified and directed.

S & F ceiling rose 2/3 terminals , PVC/ polycarbonate, insulated body ISI marked complete all as specified and directed

S & F Modular type stepped electronic fan regulator all as specified & directed

Supply and fix in replacement LED Tube light fittings wall mounted, 18 W LED 6500K with Ultra bright LED Polycarbonate Tube-light with very high efficiency provided with high efficient integral constant current LED Driver 230 V etc. complete with mounting batten including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector Conforming to Cat Part No. BLRB-DB 118 & BLRB 18W CW LED. Make :- Bajaj or equivalant model in other approved makes given in the PS all as directed.

Supply and fix in replacement LED energy efficient street light fitting 25 watt LED pressure die cast aluminium housing in heat resistant glass covered with IP-66 protection and including GI pipe of required length and size with fixing accessories complete all as specified & directed.

Supply and fix MCB DB 8 way SPN sheet metal enclosure, with 200 amps rated bus bar double door, fixed on wall making good disturbed surfaces, & connecting with existing cable including taking down old u/s MCB DB with MCB's complete all as specified and directed.

S & F for MCB double pole of rated capacity 40 amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified and as directed.

S & F for MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified and as directed.

M & L for Sub main wiring complete with 2 runs of single core 4 sqmm PVC insulated stranded copper conductor FRLS cable with continuous copper earth conductor of 4 Sqmm in & including PVC casing caping including accessories including taking down old u/s sub-main wiring complete all as specified.(Note: 3 runs of 4 Sqmm conductor & one run of PVC casing caping shall be measured as per one unit length.)

Taking down ceiling fan/ exhaust fan/ wall fans of any sweep, keeping with safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal and painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc all as specified and directed

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete.

L.T Associate

R K CONSTRUCTION AND ENGINEERING

Parhar Enterprise

M/s Asrani and sons

Suma Construction

Mourya Enterprises

greenstone construction

shiva traders

MANISH VEDPRAKASH ARORA