Improvement works by providing Colour washing and White wash along with other allied works to the AEE/Othakadai Sub divison office, AE/D/Othakadai section office,110/11 KV Othakadai SS control room building in Othakadai TNEB Campus pertaining to MEDC

Improvement works by providing Colour washing and White washing along with other allied works to the AEE/Othakadai Sub divison Office, AE/D/Othakadai section office & 110/11KV Othakadai SS control room building in Othakadai TNEB Campus pertaining to Madurai East Division of Madurai EDC.

White washing two coats with White cement approved quality over a primary coat for celling, inner and outside wallwith thorough scrapping of old plastered surface from walls including cost of all materials, lead, lift, etc., complete.

Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat of plastic emulsion primer for outer wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Engineer before use on works.) for outer wall including cost of all materials, labour, lead, lift, etc., complete.

Removing old paint from doors and windows by scrapping and refitting of shutters and Painting with two coats of ready mixed synthetic enamel paint of approved quality and colour over iron work over one coat of red oxide primer including cost of all materials, lead, lifts, labour etc., complete.

Supply and providing 1000 litre capacity priming tank made up of PVC water tank (make: sintex/equivalent) including transportation charges, cost of all labours, materials, lead, lift, etc., complete.

Supplying and fixing in position of PVC door shutter made of Single Panel laminated Plastic section of size 200 x 20 mm and PVC extraced shutter frame of size 24 x 60 mm including cost of 3 nos 85 mm butt hinges for single leaf door of size 0.80 x 2.00 m with 2 No aluminium handle and 2 nos 150 x 2 mm aluminium towel bolt hinges etc., complete.

Flooring with approved Vitrified tiles 600x600mm of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, water charges,labour, lead, lift, etc. complete.

Chipping of concrete and roughening the surface of damaged ceiling, damaged concrete from Lintel, roof level, Plinth level, flooring patchwork etc., and removing of excess concrete wastages from office premises as directed by the site engineer and redo the same with Plastering using CM 1:3 mix 20mm thick with water proofing compound and adhesive chemicals/compounds including cost of all materials, curing, labour, lead, lift, etc., complete.

GST for bidders within Tamilnadu

GST for bidders outside Tamilnadu