IMPROVEMENT/ALTERNATION OF EXISTING TOILET BLOCKS (2 NOS) AT OR ACCN OF F COMBAT, CME PUNE

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) all as specified and directed

M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in sub base of floors all as specified and directed

M & L for 25 mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) in sub base of floors with 3%WPC all as specified and directed.

Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing to store and rubbish to premises complete.

M&L non skid ceramic coloured tile 7 to 8mm thick (square/rectangular) area of each tiles exceeing 0.11 sqm but not exceeding 0.18 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

S&F Glazed ceramic coloured tiles in vertical surface of size 350x250x7mm thick including 10 mm thick rendering in CM (1:4) Over and including 10 mm thick dubbing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

Demolition of brick work or stone boulder masonry built in cement mortar complete all as specified and directed.

M&L precast solid block masonry of block 1:3:6 type C-1 wall exceeding 10 cm in width and built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls or concrete surface etc including raking out joints, hacking for key scrubbing down with water all as specified and directed.

M&L Rendering 15mm thick face of masonry/concrete surface in CM 1:4 finished even and smooth (without using extra cement Over and including 10 mm thick dubbing coat in CM 1:4 complete all as specified and as directed.

M&L rendering 5mm thick on concrete surfaces in CM 1:3 on ceiling, finished even and smooth with sagol all as specified and directed.

M&L two coat oil bound distemper over a coat of primer on wall with thin layer of 3mm thick wall care putty (in two layer) including preparation of new plastered surface.

M&L for preparation of newly plastered surfaces of ceiling and applying complete ceiling with 3mm POP/Birla putty and making smooth surface and applying three coats of white wash all as specified and directed.

M&L 20 mm thick granite work over and including 15 mm thick cement mortar (1:4) (table rubbed and polished) in steps, jamps, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

M&L machine cut cuddappah stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for half stall ceramic urinal pastel coloured of size 720x485x310mm (Make – Hindware Cat No 60006 or equivalent approved make indicated in list of makes in tender) including Urinal partition i.e toughned glass (including grinding, polishing, rounding/moulding/chamfering edges) , brass cp bottle trap , electric operated auto censor flushing arrangements (Make Hinduware Cat No.500963 or equivalent approved make indicated in list of makes in tender) complete including taking down old u/s one complete all as specified and directed

Taking up or down 15 mm bore steel tubing and connnections, including cleaning for refixing or removal to store.

Taking up or down 20 mm bore steel tubing and connnections, including cleaning for refixing or removal to store.

S&F galvanised tubes 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors.

All as per item No.19 above, but 20 mm bore.

M & L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n. exc. 10 cm girth complete all as specified and directed.

Dismantling CI/AC/PVC (SWR) pipes & fittings of any description fixed to wall/laid in trenches including making good disturbed portion of wall floor etc.

S & F 110 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to wall with and including clamps complete all as specified and directed by Engineer-in Charge.

S & F 110 mm dia PVC (SWR) bends any radius, provided with access door complete all as specified and directed by Engineer-in Charge.

S & F PVC (SWR) branch pieces, single (single 'Y') equal or unequal, 110 mm bore provided with access door complete all as specified and directed by Engineer-in Charge.

S & F PVC (SWR) branch pieces, double (double 'Y') equal or unequal, 110 mm bore provided with access door complete all as specified and directed by Engineer-in Charge.

S & F PVC (SWR) junction single (single T) equal or unequal 110mm bore, provided with access door complete all as specified and directed by Engineer-in Charge.

S & F PVC (SWR) junction double (double T) equal or unequal 110mm bore, provided with access door complete all as specified and directed by Engineer-in Charge.

S&F 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with and including clamps complete all as specified and directed by Engineer-in Charge.

S & F 75 mm dia PVC (SWR) bends any radius provided with access door complete all as specified and directed by Engineer-in Charge.

S & F PVC (SWR) branch pieces, single (single Y) equal or unequal, 75 mm bore, provided with access door complete all as specified and directed by Engineer-in Charge.

S & F PVC (SWR) branch pieces, double (double Y) equal or unequal, 75 mm bore, provided with access door all as specified and directed by Engineer-in Charge.

S & F PVC (SWR) junction single (single T) equal or unequal 75mm bore, provided with access door complete all as specified and directed by Engineer-in Charge.

S & F PVC (SWR) junction double (double T) equal or unequal 75mm bore, provided with access door complete all as specified and directed by Engineer-in Charge.

Taking down floor trap/nahani trap of any description any size and making good to disturbed portion with cement concrete type B-1 1:2:4 with water proofing compound

M & L 75mm mm outlet dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed.

S & F in repair under counter basin oval size 595x420x200 complete as specified and directed by Engr-in-Charge. Make : Jaquar

S&F in repair centre hole basin mixer with popup waste system with 450 mm with all connecting accessories complete all as specified and directed, Make : Jaquar

S&F in repairs PVC flexible waste down pipe 32mm dia with full thread coupling and washers complete all as specified and directed by Engineer-in Charge.

S&F in repairs brass chromium Angular stop cock with wall flange of 15mm dia capstan head (make - Jaquar )

S & F in repair Glass Shelf 600mm long complete as specified and directed by Engr-in-Charge. (Make : Jaquar)

S& F in repair Soap dish holder complete as specified and directed by Engr-in-Charge. (Make : Jaquar)

S & F in repair Single Towel Rail 600mm long complete as specified and directed by Engr-in-Charge. (Make : Jaquar)

S&F in repair vitreous china squatting pan, "Orissa pattern of size 630x450mm white, with intergral foot rests (excluding flushing cistern and flush pipe) (excluding fixing bolts, flushing cistern and flush pipe) including P or S trap complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete

S&F in repair 10 ltr capacity PVC valveless , syphonic action type flushing cistern, low level, white, with inlet ball valve, float and handle including brackeet and 32mm dia flush pipe of polyethylene of low or high density for low level cistern complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) including P or S trap provision of flush pipe , plastic seat cover for pedestal pan complete all as specified and directed.

S & F in repair Hand shower (Health Faucet) with 1 metre long Easy flex tubein chrome finish & wall hock. Make - Jaquar

S & F in repair Bib cock 2 in one complete as specified and directed by Engr-in-Charge.

S & F in repair Toilet paper roll holder with flap complete as specified and directed by Engr-in-Charge. (Make : Jaquar)

S&F in repair 15mm fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule complete all as specified and directed

S & F in repair overhead shower of 100 mm dia round shape single flow (ABS Body Chrome plated with grey face plate ) with rubit cleaning system. (Make : Jaquar)

S & F in repair wall mixer with provision for overhead shower with115 mm long bend pipe on upper side , connecting lugs & wall flange. (Make : Jaquar)

Taking down chowkats or frames with shutter (without taking off shutters from the frames) exc 1.5 sqmbut n.exc 4 sqm each and removing from site complete all as sepcifed and directed.

S&F 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred, put to gether with glue pinned at joints complete all as specified.

S&F 30mm thick flush shutter, solid core construction, with block board core and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

M&L for 2 coats of synthetic enamelled paint over one coat of pink primer on wooden surfaces over 10 cm width or girth including preparation of new surfaces all as specified and directed.

S & F Mild Steel works as in bands straps, hold fasts etc, conforming to IS-2062-2006 (Fe-290), embedded portion duly painted with bituminous paint and sanded, complete all as specified and directed.

M & L cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as in copings, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as specified and directed.

M & L for preparing surface of iron and treating small articles such as stop, covers, gully grating, holdfasts, end of posts area exc 0.1 Sqm each complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MSD square tube etc all as specified and directed.

S & F factory made solid PVC moulded door shutter, 30 mm thick 2mm thick 3D wood grain Moulded PVC sheet polyurethane painted on the front face & 2mm plain colour PVC sheet on back face complete all as specified and directed.

S & F Mild steel butt hinges medium weight, cold rolled, 100mm, ISI marked, complete all as specified and directed.

S & F aluminium anodised, barrel tower bolts of extruded section and fixed 150 mm complete all as specified and directed.

S&F 150 mm long aluminium anodised handles or extruded section complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised , sliding door bolt with hasp , staple, (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F aluminium anodised louvered ventilator with 4 mm thick pin headed glass and 100 mm wide glass strips, white framed and fixed with aluminium anodised frames etc including taking down existing old window of any description complete all as specified and directed.

M & L for 40mm thick cement concrete (1:2:4) type B-1, (20mm graded stone aggregate) as in sunken floor complete all as specified and directed.

M&L 15mm thick plastering in CM 1:3 along the stone wk wall of toilet and bath mixed with 3 % WPC and finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral WP compound complete all as specified and directed.

M & L for bitumen blown any grade applied hot, two coats to concrete surfaces at the rate of 1.5 kg per sqm per coat complete all as specified and directed.

M & L for polythene film black 50 micron laid in floor complete all as specified and directed.

M&L cement concrete 1:4:8, type D2 (using 40mm graded stone aggegate) as in lean concrete in sunken floor complete all as specified and directed.

Taking down Chowkats or Frames, not exc. 1.50 Sqm Each with Shutters (without Taking Off Shutters from the Frames), complete all as specified and as directed.

Taking down carefully aluminium point wiring (light, fan, socket or power), complete, (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor to match with existing surface etc.

Material & labour point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit of 25 mm dia or higher medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated solid copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings :-

One light point controlled by one switch 5 Amp

One Exhaust fan point controlled by one switch

Socket outlet, three pin, 5 Amp, independent

Socket outlet, three pin 5 Amps on the same board

S & F ceiling rose, surface Bakelite suitable for 3 pin 230 volt 50 Hz AC supply complete all as specified and directed.

S&F in replacement switch Modular, one way 6 amps, 1 module with suitable plate and cover complete all as specified and directed

S&F in replacement socket modular 6A, 2/3 pin combined 2 module with suitable plate and cover complete all as specified and directed

Taking down burn out exhaust fans from site & depsoting in store for over hauling/rewinding all as directed by Engr in Charge.

Supply and fix surface wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver for LED tube complete with retrofit LED energy saving recess/surface mounted luminaires, high efficiency diffuser for soft glare free light of capacity 20 watt suitabe of operation on 230 volt 50 Hz AC supply complete all as specified and as directed by Engineer-in-charge. Make : Cat Part No ENDURALINEARNEOBS20W LED865SPCWH of Havells or equivalent model in Wipro/CG/Bajaj.

Supply and fix heavy duty exhaust fan AC single phase 230/ 240 volts heavy duty of size 300 mm sweep, 1400 rpm, with louvers and all fixing arrangements such as plywood 18mm thick of suitable size all as specified and directed.

S&F Sub main wiring with approved colour coding as per IS with Two single core PVC insulated cable with stranded copper conductor of size 06 Sq. mm nominal area and drawing into PVC conduit including PVC insulated 06 Sqmm (nominal area) stranded copper conductor earth wire complete. NOTE : Two runs of 06 sqmm cable, one run of 06 sqmm earth cable and one run of PVC conduit will be measured as one unit

S&F Sub main wiring with approved colour coding as per IS with Two single core PVC insulated cable with stranded copper conductor of size 2.5 Sq. mm nominal area and drawing into PVC conduit including PVC insulated 2.5 Sqmm (nominal area) stranded copper conductor earth wire complete. NOTE : Two runs of 2.5 sqmm cable, one run of 2.5 sqmm earth cable and one run of PVC conduit will be measured as one unit

Supply & fix DB 6 way SPN with 200 amps rated bus bar, double door including wooden box suitable size.

S&F in replacement enclosure, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 240 volt all as specified and directed.

Supply and fixing of MCB Single pole rated capacity 5 to 32 A, 240 V breaking capacity 10 KA C series.

Supply and fixing of MCB Single pole and neutral rating capacity 40 to 63 Amp, 240 V breaking capacity 9KA C series.

Mukund Engineers and Contractors

Aakar Construction