Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.5 LAccepted-AOC | L1 | Accepted-AOC Lowest Bid | |
| 2 | L2₹18.3 L+₹2.4 L (15.2%)Rejected-Finance NOT AVAILABLE | L2 | Rejected-Finance Other than L1 | |
| 3 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
8 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Borjhar
Garrison Engineer (AF) Borjhar, Military Engineer Services, Guwahati Airport- PO, Borjhar Airport, Guwahati, Assam, Pin- 781015 Tele 0361 - 2840127
Repair/ Maint of hanger with misc works at 19 Wing AF under GE (AF) Borjhar.
2022_MES_544629_1
8295/BOR/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) Borjhar
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE (AF) Borjhar
₹40,000
Yes
30 Nov 2022
11 Aug 2022
10 Sept 2022
11 Aug 2022
8 Sept 2022
25 Aug 2022
Amount
Demolition of plain cement concrete of any description and in any position, not otherwise specifically provided for complete all as specified and as directed.
M&L for PCC (1:1½:3) type A-1 (using 12.5mm graded crushed stone aggregate) as in foundations, filling, edging of pathway and mass concrete complete all as specified and as directed
M & L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends
Dismantling of existing set of top rollers & bottom wheels by cutting, welding, lifting with jack and S & F New set of two roller assembly for top support of hanger shutter to move in guide channels and two wheel assembly for bottom support suitable to enable movement of each shutter by applicaiton of 100 Kgf of force at 1.6m height from the floor. complete all as specified and directed. Note 1. Force is to be measure before approval of GE Note 2. Roller and wheel assembly joint shall be designed for wind and other loads for Guwahati area and fixed to shutter with minimum 06 Number of nut and bolts of suitable dia & class for ling term smooth maintenance free functioning. Note 3. The top rollers shal be made with high tensile steel element fitted with roller wheels having high performence sealed roller bearings. The roller wheel diameter shall not be less than 200mm. Note 4. The bottom wheel shall be made of high tensile sheet, machined with high precession, fitted with heat resistant sealed bearings. The wheel diameter shall not be less than 250mm & the shaft diameter should not be less than 40mm
S&F including dismantling of mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, conforming to Grade E-165 (Fe 290), complete, all as specified & directed.
M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer, complete all as specified & directed .
M&L for preparation of old painted steel and iron surfaces of any description not exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.
M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint, complete all as specified & directed.
Dismantling of existing set of top rollers & bottom wheels by cutting, welding, lifting with jack and S & F a New set of two roller assembly for top support of hanger shutter to move in guide channels and two wheel assembly for bottom support suitable to enable movement of each shutter by applicaiton of 100 Kgf of force at 1.6m height from the floor. complete all as specified and directed. Note 1. Force is to be measure before approval of GE Note 2. Roller and wheel assembly joint shall be designed for wind and other loads for Guwahati area and fixed to shutter with minimum 06 Number of nut and bolts of suitable dia & class for ling term smooth maintenance free functioning. Note 3. The top rollers shal be made with high tensile steel element fitted with roller wheels having high performence sealed roller bearings. The roller wheel diameter shall not be less than 150mm. Note 4. The bottom wheel shall be made of high tensile sheet, machined with high precession, fitted with heat resistant sealed bearings. The wheel diameter shall not be less than 200mm & the shaft diameter should not be less than 35mm
M&L for greasing to axle of hangar door wheel , steel rolling shutter and making smooth for moving function over guide rail complete all as specified and as directed by Engineer-in-charge
M&L for greasing to guide channel of hangar door top and bottom rail at floor level including necessary cleaning complete all as specified and as directed by Engineer-in-charge
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6), complete all as specified and directed.
M&L for glazed ceramic tiles (coloured)of size 350mm x 250mmx6-7mm /450x 350x6 to 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar (1:4), complete all as specified and directed.
M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6), complete, all as specified & directed.
M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar (1:4), complete all as specified & directed.
M&L for non skid ceramic tiles (coloured) 7 to 8mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6), complete all as specified & directed.
Taking down chowkat or frame with shutters wooden/aluminimum/iron area not exc. 1.5 Sqm each (without taking off the wooden shutters from the frame) including cutting holes for hold fasts complete all as specified
Taking down chowkat or frame with shutters woodem/aluminium/iron area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the wooden shutters from the frame) including cutting holes for hold fasts complete all as specified.
S&F anodized aluminium frame for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.
S&F aluminium anodised powder coated door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete, all as specified & directed.
S&F aluminium anodised powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (3 Nos.) suitable handle (1 no.), complete, all as specified & directed.
S&F 5.0mm thick sheet glass, ordinary quality, coloured/tinted/silver finish and glazing with oil putty including rubber beading cleats etc in square n exc 0.5 sqm in each pane complete all as specified and as directed
S&F 4.0mm thick sheet glass, ordinary quality, coloured/tinted/silver finish and glazing with oil putty including rubber beading cleats etc in square n exc 0.5 sqm in each pane complete all as specified and as directed
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness, including cover fillets complete all as specified
Provision of perforated/semi-perforated 9mm thick ceiling tiles of size 595mm x 595mm for insulation and acoustic purposes including aluminium anodised section of size, wall angle 30mm x 25mm x 2mm thick, main / cross tee-section 15mm x 15mm x 1.4mm and suspended with 4mm dia GI wire of suitable length and including fixed & aluminium snap grid all as per clause 10.38.1 of SSR Part-I and as per manufacturer’s instructions complete all as specified and as directed by Engineer-in-Charge. Make :-- Aluminium section : -- INDALCO/ HINDALCO/ JINDAL (ii) Perforated/Semi Perforated TILES :--- ARMSTRONG/ LAFARG.
Dismantling timber scantlings in fillets, rails, posts, rafters, purlins etc. under 40 sqcm in section, framed work complete all as specified.
M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, fixed with screws, sectional area exc 13 sqcm and not exc 25 sqcm complete all as specified.
M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth not otherwise described and treated with two coats of creosote oil complete all as specified.
Dismantling timber scantling 40 sqcm and over in section in framed work in any position complete all as specified.
M&L for second class hard wood in timber scantling, clean sawn in unframed work complete all as specified.
Dismantling asbestos corrugated or semi corrugated sheets as in roof covering including ridge etc complete all as directed by Engr-in-charge.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed .
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed .
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified & directed.
M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar (1:6), complete all as specified & directed.
Taking down cement plaster on brick or concrete or stone wall surfaces including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.
M&L for 15mm thick rendering in cement mortar (1:6) on brick work or concrete surfaces of walls, finished the surface even & smooth without using extra cement complete all as specified and as directed ..
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.
Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate in plinth protection, sub base etc finishing cement concrete surface even and fair without using extra cement complete all as specified and as directed.
Taking down 110/75 mm bore AC/PVC rain water , soil & waste pipe etc from trench/wall/ceiling including fittings & fixture complete all as specified and as directed.
S & F in repair 75mm PVC(SWR) dia pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed .
S & F in repair 110 mm PVC(SWR) dia pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
M&L for preparation of old & previously treated steel and iron surfaces of any description over 10 cm in width or girth and applying one coats of synthetic enamel paint in Camouflage pattern of approved tint in roof & wall clading of hanger, complete all as specified & directed.
Taking down old/ Unserviceable Aluminium Door from frame, for repairing/ servicing & greasing incl replacement of nut, screw, rubber gasket, pivot, tapper clipsetc & refixing to existing frame including all necessary fittings/ materials required for repairing, etc, complete all as specified & directed .
M/s A R Traders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .