Special Maintenance Repair works

Supplying and fixing of pleated mosquito fibre mesh door using aluminium frame with following specification Frame Specifications: The aluminium frame shall be manufactured from high-quality extruded aluminium alloy sections conforming to IS 733 and IS 1285 with the following profile dimensions: Top Frame: 45 mm × 26 mm Bottom Frame: 25 mm × 26 mm Side Frame: 25 mm × 22 mm Handle Frame: 24 mm × 60 mm All aluminium sections shall be powder coated with a minimum coating thickness of 60 microns conforming to IS 13871. The frame shall be free from defects, warping, distortion, and surface imperfections. Mesh Specifications: The pleated mesh shall be manufactured from high-strength UV-resistant polyester yarn, permanently pleated to ensure smooth operation and long service life. The mesh shall be resistant to corrosion, moisture, fungus, and normal environmental conditions. Accessories: The system shall include guide tracks, tension cords, rollers, end caps, locking mechanisms, handles, and all necessary accessories required for smooth operation. All hardware components shall be corrosion-resistant and suitable for long-term use. All complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing of Aluminium Netlon door with standard specification of size 1.0m x 2.10 m height with stainless steel insect fine mesh including cost of all furniture, materials and fittings such as hinges handles, magnetic door catcher, etc. including labour charges for fixing the door in position, etc. all complete and as directed by the departmental officers.

Providing and filling the tile joint with epoxy grout with following specification: Surface preparation including cleaning the joint to be free from dust and loose particles. Providing masking tape on either side of the tile joint edges and providing sealing the tile gap with epoxy tile joint grout and finishing neatly and as directed by the departmental officers. The rate inclusive of cost of materials and labour, etc., complete complying with standard specification and as directed by the departmental officers.

Replacing the damaged and pooja door portion of size 2.1 *1.5 m. Using with 19mm thick marine plywood water proofing quality of best approved quality with ISI mark 25 x 12mm T/W lipping and labour charges for cutting with suitable plywood support and stiffeners of plywood including cost of plywood, painting 2 coats over one coat of primer, labour charges for wrought and put up, cost fevicol, nails, silicon seal and solution etc., all complete as directed by the departmental officers.

Supplying and fixing approved best quality aluminium anodised towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supply and fixing of 300mm (12") sweep (Heavy duty) AC exhaust fan complete with necessary existing wall opening and making good of the wall inculding cost of materials and labour charges for fixing etc., all complete and as directed by the departmental officers.

Supplying and fixing of 18W LED 3000K Round Type Recessed Fitting with LED etc complete and as directed by the departmental officers

Supplying and fixing of C.P shower arm with overhead shower rose including cost of fittings labour for fixing etc, all complete and as directed by the departmental officers., (The quality of fittings should be got approved from the Competent Authority before use).

Supplying and fixing of CP Two Way Bib Cock with Health faucet including cost of fittings labour for fixing etc, all complete and as directed by the departmental officers., (The quality of fittings should be got approved from the Competent Authority before use).