ADDITION/ ALTERATION AND RENOVATION WORKS IN SABARI BUILDING AT DLRL HYDERABAD

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead for thickness of tiles 10 mm to 25 mm all as directed.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colors, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete all as specified and directed.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colors, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete all as specified and directed.

Providing and laying rectified Glazed Ceramic vertical surface tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colors, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete all as specified and directed.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead of area 3 sq. meters and below complete all as specified and directed.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead of area beyond 3 sq. meters complete all as specified and directed.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead of area 3 sq. meters and below complete all as specified and directed.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead of area beyond 3 sq. meters complete all as specified and directed.

Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with metered cut joints and joint with 2 no's of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.

S&F 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded solid PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mix 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel Decorative finish (wood grained finish) , all complete as per manufacturer's specification and direction of Engineer-in-charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) second class teak wood complete all as specified and directed by Engr-in-charge.

Providing and fixing ISI marked flush door shutters 35mm conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete all as specified and directed.

Providing and fixing ISI marked M.S.butt hinges bright finished with necessary screws etc. 100mm size all as specified and directed.

Providing and fixing IS : 12817 marked stainless steel butt hinges of size 100X58X1.90 mm with stainless steel screws etc. complete all as specified and directed.

Providing and fixing aluminium tower bolts of size 150x10 mm, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed.

Providing and fixing aluminium tower bolts as in repairs, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. 150mm long incl dismantling complete all as specified and directed.

Providing and fixing aluminium handles 125 mm long, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. incl dismantling complete all as specified and directed.

Providing and fixing aluminium handles 125 mm long as in repairs, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed.

Providing and fixing aluminium sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. 300mm size including dismantling complete all as specified

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. including dismantling complete all as specified and directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI : 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. incl dismantling complete all as specified and directed.

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; and similar small articles all as specified.

Providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing complete all as specified.

M&L for MS Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position, in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works and applying a priming coat of approved steel primer using structural steel etc. as required all as specified.

M&L painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture complete all as specified.

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead complete all as specified and directed

M&L for 75mm thick PCC as in sub base 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) including demolition of old concrete and removal out side MoD land complete all as specified and directed

M&L for Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with dark shade pigment using ordinary cement to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) complete all as specified.

Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting) of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing for Concrete of M10 grade(1:3:6) with minimum cement content of 220 kg /cum in mass concrete of sub base of flooring complete all as specified.

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigments any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M - 35 Grade with grey cement and pigment over 50 mm thick sand cushioning complete all as specified

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead where directed complete all as specified

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

M&L for Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including water thinnable priming coat with cement primer over a coat of 1 mm thick wall putty to make surfaces smooth complete all as specified.

M&L for Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives new work (Two or more coats applied @ 1.43 liter/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 liter/10 sqm over 01 mm thick putty to make surfaces smooth all as required and as directed by Engineer in Charge.

M&L for complete removal of existing treatment wall & ceiling and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm as recommended by the manufacturer over 01 mm thick putty to make surfaces smooth all as required and as directed by Engineer in Charge.

M&L for removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. and apply two coat distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per liter. of approved manufacturer and of required shade and colour complete as per manufacturer's specification on walls over 01 mm thick wall care putty to make surfaces smooth complete all as specified.

M&L for removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. and apply two coat distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per liter. of approved manufacturer and of required shade and colour complete. as per manufacturer's specification on ceiling complete all as specified.

Providing and fixing White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required incl dismantling complete all as specified and directed.

S&F fancy type pillar tap cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore incl dismantling complete all as specified.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and directed.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: white Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests complete all as specified and directed.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures10 liter capacity complete all as specified and directed.

S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs Vitreous China Half stall urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 40 mm dia CP waste coupling, CP brass urinal spreader , CP connection of suitable length and fixing with 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed. Cat Part No 96010 of Hindware or equivalent in Parryware/Cera

S&F 32/40 mm dia PVC flexible waste pipe of length 75cm with connector suitable to connect the pipes with waste fitting/ coupling of WHB/ sink/ urinal complete.

Taking up or down steel tubing and connections, Supply and fixing 15mm dia GI steel tubes, medium grade with all fittings and fixed complete to wall and ceiling or laid in floors incl cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 complete all as specified and directed.

Taking up or down steel tubing and connections, Supply and fixing 20mm dia GI steel tubes, medium grade with all fittings and fixed complete to wall and ceiling or laid in floors incl cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 complete all as specified and directed.

S&F 1000 Liters capacity rotational moulded polyethylene water storage tanks three layered white (cylindrical vertical with closed threaded lid) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe pipe etc complete all as specified in SSR Part I, including dismantling old water tanks

S&F in repairs ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed bore dia of pipe 20mm complete fixed all as specified.

S&F in repairs 20 mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

S&F in repairs Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as specified.

S&F as in repair angle stop valves cast copper alloy, fancy type chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for unions in 15 mm bore fixed complete all as specified.

S&F as in repair push type valves cast copper alloy, fancy type chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for unions in 15 mm bore fixed complete all as specified.

S&F in repair PVC connection 15mm dia 450mm long with 2 No's brass check nuts with washer complete all as specified

S&F in repair Bib taps, two way cast copper alloy chromium plated, fancy type with capstan heads, screwed down, screwed for iron pipe or for brass ferrule 15mm bore fixed complete all as specified.

Demolition of stone or brick masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified.

M & L Brick work modular with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) all as specified and as directed byEng-in-charge.

S&F in repairs Grating round 125 mm nominal dia with 25 mm waste hole size of PTMT. (Minimum weight 50gms) complete all as specified.

Dismantling of 100 mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required including fittings complete all as specified.

Dismantling of 75 mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required including fittings complete all as specified.

S&F of cast iron floor trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 etc complete all as specified and as directed.

Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536: 125mm dia with ring joints laid in floors or trenches and walls complete

Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536: 150mm dia with ring joints laid in floors or trenches and walls complete

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm dia Sand cast iron S&S as per IS - 1729

Providing and fixing terminal guard : 100 mm Sand cast iron S&S as per IS - 1729 vent cowl

Providing and fixing 75 mm dia Sand cast iron S&S as per IS- 3989 bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Providing and fixing 75 mm dia plain bend Sand cast iron S&S as per IS - IS -1729 of required degree.

Providing and fixing 100 mm dia plain bend Sand cast iron S&S as per IS - 1729 of required degree.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design of size 150 x 100 mm size P type with common burnt clay F.P.S. (non modular) bricks of class designation complete all as specified incl old dismantling.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge

Providing and fixing false ceiling at all heights with integral densified 15 mm thick regular edged light weight calcium silicate false ceiling tiles of Size 595x595mm of approved texture, design and patterns, , to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling us in galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Galvanized iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic raw plugs at 450mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With complete all as specified.

Providing and fixing factory made uPVC white colour sliding glazed window up to 1.50 m in height dimension Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm), comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be metered cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. incl taking down old window complete all as specified.

Providing and fixing factory made uPVC white colour Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area up to 0.75 sqm.) Comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be metered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. incl taking down old down old window/vents complete all as specified.

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, metered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for for partitions including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, metered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area 3 sq. meters and below

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight up to 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness

Providing and fixing Brass 100mm mortise latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete

Providing and fixing 125mm long aluminium handles, ISI marked, powder coated as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing 250mm long aluminium tower bolts, ISI marked, powder coated as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing 300mm long aluminium sliding door bolts, ISI marked powder coated as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete

Providing and fixing powder coated aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).

S&F stainless steel grade 304 railing 68mm dia hand rail and 3 No's 16mm dia horizontal rails and 40mm dia balusters fixed at 900 mm centre to centre with clamps and dash fastener incl newel post of 75 mm dia with spherical cap fixed at starting and terminal point of railing incl taking down old stair case railing of any description complete all as specified

S&F aluminium composite panel cladding work, composite material having total thickness 4mm with 0.50mm thickness aluminium skin exterior grade PVDF coating with necessary fittings / fixtures and hardware using U brackets made in GI wire as required and mounting on aluminium section 50x25x1.4mm thick tube bolted to the section to form grid for the cladding complete with weather silicon along with the PU foam and all cladding done in tray system or stick system as required complete all as specified and as directed.

S&F brass cutting letters of size 300mm high and 25mm wall thickness, Apoplexy lacquer coated including soldering with lead, buffing and colouring with standard colour ISI standard, MRF brand fixed on existing ACP/ any type of wall surfaces with brass bolts and nuts complete all as directed.

S&F venetian blinds roller type multicolor fiber water resistant,UV protection, transparent, black out suitable for window etc fixed incl taking down old blinds complete all as specified and directed.

Providing and laying Polished Granite stone flooring Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Providing and fixing glazing in door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

Providing and fixing glazing in door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. Pre-laminated particle board with decorative lamination on both sides complete as per architectural drawings and directions of engineering-charge. .

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthling the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

One light point controlled by one 5 Amps one way switch.

One ceiling fan /exhaust fan point controlled by one 6 Amps one way switch

One 3 pin socket outlet 6 Amps on the same board with other switches.

One 3 pin 6 Amps switch socket outlet point on independent board

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire .Each point 10 meters

S&F modular type 06 Amps, 05 pin multipurpose switch, socket outlet 03 No's and 16 Amp multipurpose switch, socket outlet 01 No's on one switch board concealed in wall suitable for terminal boxes for fixing of switch sockets etc including suitable size modular plates and including all internal electrical connections with copper conductor

S&F modular type 06 Amps, 05 pin multipurpose switch, socket outlet 04 No's on one switch board concealed in wall suitable for terminal boxes for fixing of switch sockets etc including suitable size modular plates and including all internal electrical connections with copper conductor

S & F modular switch 1 way, 16 amps, 1 module complete all as specified

S & F Modular sockets, 6 amps 2/3 pins combined 2 module complete all as specified

S & F Modular sockets,16 amps 5 pins combined 2 module complete all as specified

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. 100 A as required .

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. 63 A as required .

S&F 6 amps. to 32 amps. ratings , SPN MCB, “C” curve, 10 KA breaking capacity complete all as specified and as directed by Eng–in–Charge.

S&F 6 amps. to 32 amps. ratings , SP MCB, “C” curve, 10 KA breaking capacity volts complete all as specified and as directed by Eng–in–Charge.

Dismantling of existing unserviceable MCB distribution board and S&F sheet metal enclosure DB concealed with wall having facility to fix MCCB as incomer and MCBs in outgoing, TP vertical type 8 way of double door, complete fitted with bus bars, neutral links, G frame including S&F 3 pole MCCB 125 Amp capacity, 50 Hz, 16 KA Breaking capacity, blanking plates including making good disturbed surfaces complete all as specified and directed.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required 4 way (4 + 12), Double door . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required 8 way (4 + 24), Double door . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

S&F of 8 way, SPN, double door, MCB DB type with 200 Amps rating Busbar and suitable arrangement for mounting MCB's including taking down old one complete all as directed

S&F of MCB DB SPN 4 way double door type with 200 Amps rating Busbar and suitable arrangement for mounting MCB's including taking down old one complete all as directed

Supply and fixing LED luminaries 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete.

Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED luminaries 2'X2', 42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing LED Building Security light 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit 4 X 10 sq. mm + 2 X 6 sq. mm earth wire as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit 4 X 6 sq. mm + 2 X 6 sq. mm earth wire earth wire as required.

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit 2 X 6 sq.mm earth wire as required.

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit 2 X 4 sq.mm earth wire as required.

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit 2 X 2.5 sq.mm earth wire as required.

Removing of old UNSV conduits and S&F DLP U PVC adaptable trucking system of three section with accessories for mounting of Equipment Control Wires, Telecommunication Wires and electrical Cables with mounting. Note (One Running Meter include with Base body 150 x 50mm , flexible full Cover width of 40mm , Separation partition for 105 x 50 Trucking, Base Joint (Body Joint - fro aligning bases for installation, cover joint for 40mm width, Left or right end Cap & Internal/ External Angle.)

Supply and installation of earthing station as per relevant IS/IEC standard complete with 600x600x3.15 mm copper plate and conductors are made of 70 sqmm non corrosive standard copper confirming to IEC 62561 with minimum thickness of 1.7mm per strand and (2 run of 3mtr with exothermically welded to plate ensure that the plates are buried deep in soil. Busbar of 25x6x300 mm should be connected in the top portion and to exothermically welded with 70 sqmm wire to ensure the non corrosive contact, and Earth enhancement compound shall be chemically intert to subsoil. it shall not pollute the environment.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

M&L Earthing complete with GI earth plate electrode 600x600x6.3mm buried directly in ground vertically, earth pit not less than 2.25 meter deep below ground level with the top edge of earth plate at a depth of not less than 1.5 meter below ground and connected to GI earth strip 25 x 4 mm size by means of bolts, nuts & washers of galvanized iron or steel, GI earth strip shall be protected by 40 mm dia GI pipe (light grade) up to connecting point, watering pipe 20mm dia GI Pipe light grade, GI Wire mesh funnel, alternate layers of Charcoal and Salt including necessary excavation and earth work, PCC (1:3:6) type C-1 earth Chamber, 40mm thick RCC cover 1:2:4 type B-1 mix with 6mm dia nominal reinforcement @ 100mm c/c both ways etc complete all as shown in electrical plate No 3 connected to earth tested point, including testing on completion, complete all as specified and directed. Note :- Earth strip beyond 7.5 Meter, if required shall be measured and paid separately under respective item of schedule.

Earth continuity conductor GI strip 25 x 5mm as main earthling lead fixed to wall or batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthling etc as required.

Cutting to existing steel tubing for alterations upto 50 mm GI tubing including provision of reduces if required complete making good etc.

Pipes galvanized, for Drinking Water (Manjeera Water) “Medium class”, supplied And laid complete including fittings 50 mm (2.0”) dia.

Pipes galvanized, “Medium class”, supplied And laid complete including fittings 40 mm (1.5”) dia.

Pipes galvanized, “Medium class”, supplied And laid complete including fittings 25 mm (1.0”) dia.

Pipes galvanized, “Medium class”, supplied And laid complete including fittings 15 mm (1/2”) dia.

S&F Cast copper alloy Stop Valve, 50 mm size screwed down, high pressure, with butterfly handle screwed both end for iorn pipe.

S&F Cast copper alloy Stop Valve, 25 mm size screwed down, high pressure, with butterfly handle screwed both end for iorn pipe.

Ball brass valves high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed.

SUN LIGHT HOUSE

hari enterprises

Anjana corporation

Ravi Enterprises

MOHAMMED GHOUSE

ELEVATORS MAINTENANCE ENGINEER WORKS

SRI SAI ENTERPRISES

CHARAN ELECTRICALS

omsai thermax engineers