8125/SAR-T-35/2025-26 REPAIR/ REPLACEMENT OF INTERNAL ELECTRIC WIRING, LIGHT FITTINGS AND FIXTURES IN TECH AREA, REPAIR/ MAINT OF WINDOW/ SPLIT ACs/WATER DESERT COOLERS, REFRIGERATORS, DEEP FREEZERS AND OTHER CONNECTED ITEMS AND REPAIR/MAINT OF FANS

Amount

Taking down carefully copper / aluminium point wiring light / fan, socket or power point complete including fittings such as switches, sockets, ceiling rose, bell push complete all as specified and directed.

M & L for replacement of concealed point wiring complete with PVC insulated and unsheathed FRLS cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit ISI marked medium grade not less than 20 mm dia, with MS stove enamelled sunken boxes (normal and modular type as required) including earth dolly with plastic laminated sheet top cover (cover plate with frame in case of modular) of approved make and colour including 1.5 sqmm multi stranded FRLS copper conductor cable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and directed for the followings :-One light / fan point controlled by one way switch

All as per Item No 2.00 here-in-above but One 5 Amp socket outlet on independent board complete all as specified and directed.

All as per Item No 2.00 here-in-above but One 5 Amp socket outlet on same board complete all as specified and directed.

All as per Item No 2.00 here-in-above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, FRLS cable for 15 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and directed.

M & L for replacement of point wiring in casing caping on sufraces of wall/ceiling floor etc complete with PVC insulated and unsheathed FRLS cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade with PVC rectangular block of suitable size including 1.5 sqmm multi stranded FRLS copper conductor cable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and as directed for the followings :- One light / fan point controlled by one way switch

All as per Item No 6.00 here-in-above but one 5 Amps socket out let point controlled by one 1-way switch on independent board complete all as specified and directed.

All as per Item No 6.00 here-in-above but one 5 Amps socket out let point controlled by one 1-way switch on same board complete all as specified and directed.

All as per Item No 6.00 here-in-above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, FRLS cable for 15 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and directed.

M & L for replacement of existing conduit point wiring complete with PVC insulated and unsheathed FRLS cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade drawn through existing conduitwith MS stove enamelled sunken boxes (normal and modular type as required) including earth dolly with plastic laminated sheet top cover ( cover plate with frame in case of modular) of approved make and colour including 1.5 sqmm multi stranded FRLS copper conductor cable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and directed for the followings :- One light / fan point controlled by one switch.

All as per Item No 10.00 here-in-above but one 5 Amps socket out let point controlled by one switch on independent board complete all as specified and directed.

All as per Item No 10.00 here-in-above but one 5 Amps socket out let point controlled by one switch on same board complete all as specified and directed.

All as per item No 10.00 here-in-above but with 2.5 Sqmm nominal cross sectional area electric cable for 15 Amps socket outlet point controlled by one switch on independent board complete complete all as specified and directed.

M & L for flame proof wiring with single core PVC insulated and unsheathed 1100 volt grade FRLS electric cable with multi stranded copper conductor of size 2.5 Sqmm phase and neutral drawn in and including ERW rigid steel stove enameled black conduit heavy duty ISI marked of size 20mm dia on surface/wall/ceiling including all flame proof conduct fittings and accessories such as tees junction boxes, bends duly tested by CMRI Dhanbad suitable for one light /fan point controlled by one flame proof rotary switch SP one way and including drawing continuous earth wire FRLS PVC insulated unsheathed 1100v grade cable with stranded copper conductor of size 2.5 Sqmm and connected to earth dolly complete all as specified and directed.

All as per Item No 14.00 here-in-above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, FRLS cable for 15 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and directed.

S & F in replacement switch piano type 5 amp one way ISI marked complete all as specified and directed.

S & F in replacement switch piano type15 Amps one way ISI marked complete all as specified and directed.

S & F in replacement socket outlet 5 pin 5 Amps flush type complete all as specified and directed.

S & F in replacement socket outlet 2-in-1, 6 pin 5 amp and 15 amps complete all as specified and directed.

S & F in replacement socket outlet 6A-2/3 Pin combined 2 module modular type complete all as specified and directed.

S & F in replacement socket outlet 6A/16A-2/3 pin combined 2 module modular type complete all as specified and directed.

S & F in replacement switch 6 amps modular type one one way complete all as specified and directed.

S & F in replacement switch 16 amps modular type one one way complete all as specified and directed.

S & F in replacement electronic fan regulator Step type & flush type complete all as specified and directed.

S & F in replacement of ceiling rose surface bakelite 63 x50mm three terminals complete all as specified and as directed.

S & F in replacement of Lamp holder bakelite type with back plate suitable for batten fittings complete all as specified as directed

S & F in replacement of sub main wiring with PVC insulated, FRLS unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 4.0 sqmm (Nominal area) drawn in and including PVC conduit of suitable size as directed with and including one run of 4.0 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green colour as continuous earth wire including lugs etc connected and tested complete all as specified and as directed. Note: (i) Two runs of 4.0 sqmm cable and one run of 4.0 sqmm cable of earth continuity conductor and conduit shall be a unit length.

S & F in replacement of sub main wiring with PVC insulated, FRLS, unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 6.0 sqmm (Nominal area) drawn in and including PVC conduit of suitable size as directed with and including one run of 6.0 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green colour as continuous earth wire including lugs etc connected and tested complete all as specified and as directed. Note: (i) Two runs of 6.0 sqmm cable and one run of 6.0 sqmm cable of earth continuity conductor and conduit shall be a unit length.

S & F in replacement of Rigid non-metallic PVC conduit 25 mm (external dia) ISI marked (on surface) incl of all accessories and all fittings such as Tees bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers lock nuts, saddles, pipe hook etc complete all as specified and directed.

All as per Item No 28.00 here-in-before but of size 20mm complete all as specified and directed.

S & F in replacement of PVC casing capping 20/25mm ISI marked complete all as specified and directed

M & L for fixing PVC gang box for mounting one switch and one socket of 5 Amps including all accessoriese complete all as specifies and directed.

M & L for fixing PVC gang box for mounting one switch and one socket of 15 Amps including all accessoriese complete all as specifies and directed.

S & F in replacement of sheet metal enclosure double door concealed suitable for SPN distribution boards when MCB to be used having 200 Amp rated bus bar 12 ways 240 V including fixing in new location with connection of circuit and submain as per site requirement complete all as specified and directed. Note: (a) MCBs are to be measured and paid seperately. (b)Make of MCBs and DB should be same. (c) Extra circuit length where DBs are to be shifted from existing location to new location shall deemed to be included in the quoted rate.

All as per Item No 34.00 here-in- before but for 8 ways complete all as specified and directed.

All as per Item No 34.00 here-in- before but for 4 ways complete all as specified and directed.

S & F in replacement of single pole and neutral enclosure with 2 pin and metal earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

S & F in replacement MCB SP 5 to 32 Amps, 240 volts curve 'B',breaking capacity 10KA, complete all as specified and directed.

S&F in replacement MCB SPN 16 to 40 Amps, 240 volts, curve 'B', breaking capacity 10 KA, complete all as specified and directed.

S&F in replacement MCB SPN 40 to 63 Amps, 240 volts, curve 'B', breaking capacity 10 KA, complete all as specified and directed.

S & F in replacement of modular Fan Regulator fan step regulator,120W- single module ISI Marked complete all as specified and directed.

S & F in modular blanking plate, 1 module ISI Marked complete all as specified and directed.

S&F in replacement metal flush box 3 module all as specified and directed.

All as per Item No 43.00 here-in-above but for 4 module complete all as specified and directed.

All as per Item No 43.00 here-in-above but for 6 module complete all as specified and directed.

All as per Item No 43.00 here-in-above but for 8 module complete all as specified and directed.

S & F in replacement for white cover plate with frame for 3 module complete all as specified and directed.

All as per Item No 47.00 here-in-above but for 4 module complete all as specified and directed.

All as per Item No 47.00 here-in-above but for 6 module complete all as specified and directed.

All as per Item No 47.00 here-in-above but for 8 module complete all as specified and directed.

S & F in repair of Earthing to DBs with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to main earth lead 4.0 sqmm galvanised iron wire by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead shall be protected by GI pipe 15 mm dia medium grade and connected to distribution board including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all as specified and directed.

S & F in repair for Earth continuity conductor or main earthing lead of 4.0 Sqmm galvanized iron wire, buried in ground or fixed to wall in and including 15 mm bore GI pipe medium grade for protection of earth wire complete all as specified and directed.

S & F in repair plastic laminated bakelite sheet cover of size 100mm x 100 mm Hylam brand including cutting holes for switches, sockets etc as pre requirement including fixing with machine screws and washer complete all as specified and directed.

All as per Item No 53.00 here-in-above but of size 175mm x 100mm complete all as specified and directed.

All as per Item No 53.00 here-in-above but of size 200mm x 150mm complete all as specified and directed.

All as per Item No 53.00 here-in-above but of size 250mm x 200mm complete all as specified and directed.

All as per Item No 53.00 here-in-above but of size 350mm x 300mm complete all as specified and directed.

S & F in replacement flame proof switch socket and plug combined in LM-6 cable termination box in LM-6, 16 A, 250 V, 2P plus earth complete all as specified and directed.

S & F flame proof/weather proof direct entry type rotary switch single pole on & OFF rotary motion switch in cast aluminum alloy LM-6 enclosure epoxy powder coated single pole 230Volts 16 Amps, AC ON/OFF switch operated externally by Knob having 02 Nos of M-20 cable entries, earthing terminals suitable for mounting on Wall/Steel structure etc complete all as specified and directed.

S & F LED 1x16 Watt flame prooflight fitting, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed. Note : (a) All fittings shall be ISI marked and shall have approval of CMRI Dhanbad. (b) Original Test certificate of Manufacturer shall be produced by Contractor.

S & F in replacement of Cable PVC insulated unsheathed single core 1100V FRLS grade stranded flexible copper conductor of size 1.5 sqmm complete all as specified and directed.

S & F in replacement of Cable PVC insulated unsheathed single core 1100V FRLS grade stranded flexible copper conductor of size 2.5 sqmm complete all as specified and directed.

S & F in replacement of Cable PVC insulated unsheathed twin core of 23/0.0076 size flexible copper conductor complete all as specified and directed.

S & F in replacement of Cable PVC insulated unarmoured three core 1100V FRLS grade stranded flexible copper conductor of size 2.5 sqmm complete all as specified and directed.

S & F 25 mtr long 2.5 cm wide and atleast .125 mm wall thickness self adhesive PVC insulated electrical tape roll of good quality complete all as specified and directed.

S & F in replacement of PVC round shape junction box cover of suitable size including fcomplete all as specified and directed.

Taking down light fittings of any type any size any location complete all as specifed and directed.

Taking down DB including old u/s MCB/MCCB of any size any type from any location complete all as specifed and directed.

S & F in replacement of 09 watt 2 star LED bulb with B22 /B27 Base cap as required, 1200 lumens ,Colour rating Index 80,colour temp warm white ,satrtup time less than 2 sec,In built surge 3.0 kV, voltage range 140V to 270 V , Lamp life 15000 hours complete all as specified and directed.

S & F in replacement enviroment friendly recess/pendent mounting 36 watt LED flat panel 2'x2' fabricated CRCA sheet steel duly powder coated housing cool white with high efficient LEDs & glare free opal diffuser PF>0.95 , lumen efficacy>100 lm/W, THD<10% operating range 220v to 240V,CRI>80, Colour Temerature 3500/4000 K (Warm White) including connection with existing wire and accessories complete all specified and directed.

S & F in replacement of enviroment friendly indoor decorative 5/6 Watt LED polycarbonate Batten with opal diffuser, operating voltage range 140v to 270 V, Driver efficiency 88%, lumen efficiency =100 lm/watt , THD≤ 20 CRI>80, colour temperature 6500 K, inbuilt surge protection = 2.5 Kv, isolation=3.75, and with zero mercury content including all accessories complete all specified and directed.

S & F in replacement enviroment friendly,ultra modern, energy saving surface mounted decorative 10 Watt LED bulkhead fitting modular type with polycarbonate housing ,high efficient LEDs with opal diffuser and IP65 protectio, lumen efficacy 85 lm/watt with colour temerature 6500K, THD≤ 20 CRI>80,2.5 kV surge protection complete all as specified and directed.

S & F 12 watt LED bulb with B22 Base cap, 1200 lumens, Colour rating Index 80,colour temp F 6500K,satrtup time less than 2 sec,In built surge 3.0 kV, voltage range 140V to 270 V, Lamp life 15000 hours complete all as specified and directed.

S & F in replacement of enviroment friendly indoor decorative 20 Watt LED Polycarbonate Batten with opal diffuser , operating voltage range 140v to 270 V, Driver efficiency 88%, lumen efficiency =100 lm/watt , THD≤ 20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 2.5 Kv, isolation=3.75, and with zero mercury content including all accessories complete all as specified and directed.

S & F in replacement enviroment friendly recess/surface mounting 36 watt LED flat panel 2'x2' fabricated CRCA sheet steel duly powder coated housing cool white with high efficient LEDs & glare free opal diffuser PF>0.95 , lumen efficacy>100 lm/W, THD<10% operating range 220v to 240V,CRI>80 including connection with existing wire and all accessories complete all as specified and directed.

S & F in replacement of enviroment friendly indoor decorative 10 Watt , 2 feet , mirror type LED lamp with opal diffuser , operating voltage range 140v to 270 V, Driver efficiency 88%, lumen efficiency =100 lm/watt , THD≤ 20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 2.5 Kv, isolation=3.75, and with zero mercury content including all accessories complete all as specified and directed.

M & L for servicing of split AC 1.5 /2 TR rating by removal of dust/dirt and carbon particles from indoor and outdoor unit with water spray pump duly collected in jacket complete all as specified and directed.

M & L for servicing of window AC 1.5 TR rating by removal of dust/dirt and carbon particles from indoor and out door unitwith water spray pump duly collected in jacket complete all as specified and directed.

S & F in replacement Condenser fan blade made out of aluminium/plastic as per matching to existing suitable for window /split type AC upto capacity 2.0 ton complete all as specified and directed.

S & F in replacement Front grill suitalbe for window type AC upto capacity of 2.0 ton complete all as specified and directed.

S & F in replacement of condensing coil suitable for window type room AC of capacity 1.5 ton as per sample complete all as specified and directed.

S & F in replacement cooling coil suitable for window type room AC of capacity 1.5 ton as per sample complete all as specified and directed.

S & F in replacement condensing coil suitable for split type AC of capacity 1.5 ton as per sample complete all as specified and directed.

S & F in replacement cooling coil suitable for split type AC of up to capacity 1.5 ton as per sample complete all as specified and directed.

S & F replacement of Indoor unit suitable for 1.5 TR split type AC complete all as specified and directed.

S & F replacement of Outdoor unit suitable for 1.5 TR split type AC without compressor complete all as specified and directed.

S & F in replacement PCB for window/Split type AC up to 2 Ton capacity suitable for existing make complete all as specified and directed.

S & F in replacement Blower/ condensor fan motor of three speed, testing, commissioning complete suitable for window type 1.5 Ton AC suitable to operate 230V AC complete all as specified and directed.

S & F in replcement of blower motor suitable for indoor unit rating and capacity as per site requirement for upto 2.0 ton capacity Split type AC complete all as specified and directed.

All as per Item No 89.00 here-in-above but suitable for condensor fan of out door unit of split AC up to 2.0 TR capacity complete all as specified and directed.

S & F in replacement Blower fan made out of platic suitable for indoor unit split type AC upto 2.0 ton capacity complete all as specified and directed.

S & F in replacement of genuine company sealed compressor suitable for any type of existing make for split/ window type AC capacity 1.5 Ton with all fixing accessories complete all as specified and directed by Engineer-in-charge. Note: Repaired and repainted compressor not accepted only genuine compressor are accepted. with test report and one year warranty certificate from OEM.

All as per Item No 92.00 here-in-before but for split/ window type AC of capacity 2.0 Ton complete all as specified and directed.

S & F in replacement Running Capacitor of 06-45 Mfd suitable for window / split type AC complete all as specified and directed.

S & F in replacement Wiring kit suitable for 1.5 to 2.0 ton capacity AC complete all as specified and directed.

S & F in replacement Air filter of existing make synthetic, PVC suitable for 1.5 to 2.0 ton of capacity AC window/Split type complete all as specified and directed.

S & F in replacement Refrigerant gas filter and capilary assembly complete suitable for AC upto 2 ton capacity complete all as specified and directed.

S & F in replacement gas charging pin valve complete all as specified and directed.

Taking out window type AC complete unit from any height/ any floor storey building and shifting to another locatiion in the same or other building in the complex as directed complete with making of opening of suitable size in wall/window as per site requirement complete all as specified and directed.

Taking out split type AC complete indoor and outdoor unit from any height/ any floor storey building by including pumping down the gas into the compressor by controlling the suction and discharge valves, disconnecting the suction and discharge copper pipe and shifting to another locatiion in the same or other building in the complex complete all as specified and directed.

Supply and charging the gas refrigerant (including refrigerant) of window type AC upto 2 ton capacity including testing after application of nitrogen gas pressure to find out any leakage, brazing and stopping of all leakage detected, injection of nitrogen to ensure leak proof gas circulator system flushing out the nitrogen gas complete all as specified and directed.

All as per Item No 101.00 here-in-above but split type AC up to 2 TR capacity complete all as specified and directed.

M & L for replacement of gas/Split valve ¼” for split AC 1.5 ton capacity complete all as specified and directed.

All as per Item No 103.00 here-in-before but gas/split valve 1/2" complete all as specified and directed.

S & F in replacement compressor shut off valve 3/8" for split AC 1.5 ton capacity complete all as specified and directed.

S & F in replacement compressor shut off valve 3/8" for split AC 2 ton capacity complete all as specified and directed.

S & F in replacement of Copper tubing of size 1/4" suitble for any type of split type AC complete all as specified and directed.

All as per Item No 107.00 here-in-above but of size 1/2" complete all as specified and directed.

All as per Item No 107.00 here-in-above but of size 3/8" complete all as specified and directed.

All as per Item No 107.00 here-in-above but of size 5/8" complete all as specified and directed.

S & F in replacement PVC pipe of suitable size to drain out condensation water for any type of AC including necessary clamping arrangement to wall complete all as specified and directed.

S & F in replacement PVC conduit 50mm dia including all clamps, tees & accessories and connecting the condensate pipe of ACs to this conduit for proper drainout of condensate water from Acs of Bldgs upto 5 (five) storey complete all as specified and directed.

S & F in replacement of synthetic rubber tube for thermal insulation for refrigerant copper piping of size 1/4" internal dia split type AC complete all as specified and directed.

All as per Item No 113.00 here-in-above but of size 1/2" complete all as specified and directed.

All as per Item No 113.00 here-in-above but of size 3/8" complete all as specified and directed.

All as per Item No 113.00 here-in-above but of size 5/8" complete all as specified and directed.

S & F in replacement of window AC kit complete chasis including cooling coil, condensing coil, fan motor, blower, condensing fan and complete body without compressor suitable for window AC of capacity upto 1.5 ton complete all as specified and diretced.

S & F in replacement of remote for window / split type AC as per matching existing complete all as specified and diretced.

S & F in replacement metal plug top 2 pole and earth, 20 Amps, 250 volts suitalbe for sheet metal enslousers complete all as specified and directed.

S & F in repalcement metal clad socket 2 pole and earth, 20 Amps 250 volts suitalbe for sheet metal enclousers complete all as specified and directed.

S & F in replacement MCB single pole, 6-32 Amps, 10 KA 240 Volts, 50 HZ type. C series complete all as specified and diretced.

S & F in replacement sheet metal enclosure single pole and neutral with 2 pin and earth socket complete with one single pole MCB 20 A, 10 KA 'C' series complete all as specified and diretced.

S & F in replacement of PVC insulated FRLS flexible copper conductor cable 1100 volts round grade, 3 core of size 1.5 Sqmm complete all all as specified and directed.

M & L in replacement sub main wiring with two run of single core strated copper conductor FRLS cable of size 2.5 Sqmm and 2.5 Sqmm copper conductor cable as earth continuity conductor drawn in existing conduit or PVC casing capping complete all as specified and directed. Note: 2 Run of 2.5 Sqmm + 1 Run of Earthwire shall be measured on one run.

S & F in replacement AC stand suitable for out door AC unit up to cap of 2 ton capacity any type complete with fastners stove enamelled complete all as specified and directed.

M & L for servicing of refrigerator of any capacity including cleaning of refrigerator from inside and outside with potassium permanaganates, servicing of colling coil, fan, motor, condensor, fan blades and its connected water and refrigerant fittings complete all as specified and directed.

M & L for servicing of deep freezer of any capacity including cleaning of deep freezer from inside and outside with potassium permanaganates, servicing of colling coil, fan, motor, condensor, fan blades and its connected water and refrigerant fittings complete all as specified and directed.

M & L for servicing of desert cooler of any size including cleaning of desert cooler from inside & outside, greasing of fan kit, motor, water pump and connected accessories complete all as specified and directed.

M & L for painting of desert cooler capacity upto 4000 Cfm with two coats of approved synthetic enamel paint inside & outside including fan/fan blade/brackets and water tank with rubber paint after scrapping the rust, peal of paint and preparation of surface complete all as specified and directed by Engr-in-Charge. Note: The rates are inclusive of taking down cooler from any height, removal to workshop for painiting and refixing in position after painting.

S & F in replacement of wood wool pad (set of three) heavy duty for desert cooler complete all as specified and directed.

S & F in replacement of desert cooler submersible water pump 18 watt complete with electric motor single phase 230 volts 50Hz including lead, connecting & testing complete all as specified and directed.

S & F in replacement desert cooler fan motor double bearing 145 watt,copper wound suitable for upto 450mm sweep SP 230 volts 50HZ including legs, rubber bush nuts/bolts for fixing of fan motor complete with connection & testing complete all as specified and directed.

S & F in replacement of commercial ply wood BWP 4mm thick ISI marked for desert cooler of any size to close the opening between desert cooler grill and window complete all as specified and directed.

S & F in replacement plug top 3 pin 5 Amps complete all as specified and directed.

S & F in replacement motor capacitor 2.5/3.15/4 Mfd complete all as specified and directed.

S & F in replacement front grill made of MS complete with air guide vanes suitable for desert cooler of capacity upto 4000 Cfm complete all as specified and directed.

S & F in replacement of body without side panels made out of galvanised iron sheets of 18 gauge for bottom tank & 20 gauge for top cover of desert cooler body duly painted with red-oxide & 2 coat of synthetic enameled paint complete with fixing of all spare complete all as specified and directed.

S & F in replacement of side panels of desert cooler body of 22 gauge of existing size & shape duly painted with red-oxide & 2 coat of synthetic enameled paint complete with fixing of all spare complete all as specified and directed.

S & F in replacement of float valve assembly with PTMT ferrule 15 mm dia and PVC ball valve suitable for water cooler up to 150 ltrs capacity and desert cooler upto 4000 Cfm complete all as specified and directed.

S & F in replacement of PVC rubber pipe 15mm bore heavy duty including pvc elbow threaded suitable for insertion in flexible PVC pipe complete all as specified and directed.

S & F in replacement of PVC water distributor four way complete all as specified and directed.

M & L for servicing of voltage stabilizer AC single phase 2 to 5 KVA of any make by opening of body, cleaning internally checking and tightening of all terminal connections including replacement of worn out terminals connectors, screw, bolts etc complete all as specified and directed.

S & F in replacement of transformer of voltage stabilizer of capacity upto 5 KVA as per matching to existing, complete all as specified and directed.

S & F in replacement of buck and boost relay of voltage stabilizer of capacity upto 5KVA complete all as specified and directed.

S & F in replacement of electronic panel PCB of voltage stabilizer of capacity upto 5 KVA as per matching to existing, complete all as specified and directed.

S & F in replacement of timer switch circuit of voltage stabilizer of capacity upto 5 KVA as per matching to existing, complete all as specified and directed.

S & F in replacement of trigger transformer of voltage stabilizer of capacity upto 5 KVA as per matching to existing, complete all as specified and directed.

S & F in replacement of voltmeter of voltage stabilizer of capacity upto 5 KVA as per matching to existing, complete all as specified and directed.

M & L for servicing of water cooler of any capacity including cleaning of water cooler from inside and outside with potassium permanaganates, servicing of colling coil, fan, motor, condensor, fan blades and its connected water and refrigerant fittings complete all as specified and directed.

Supply and charging the green gas in the water cooler of any make and capacity including testing and detecting leakage if any with nitrogen gas and vaccum the sytem after rectification of all leakages complete all as specified and directed.

S & F in replacement thermostat switch for water cooler of any make & size complete all as specified and directed.

S & F in replacement starting relay/over load relay suitalbe for water cooler of any make & size complete all as specified and directed.

S & F in replacement defective push cock 15 mm bore chromium plated heavy duty suitable for water cooler of any make and capacity complete all as specified and directed.

M & L for preparation of old painted surfaces of water cooler by removing old deteriorated paint, making surfaces smooth and applying two coats of synthetic enamel paint over a coat of zinc oxide primer by spray painting complete all as specified and directed.

S & F in replacement fan motor ISI marked suitabe for water cooler capacity upto 40/80 ltrs of any make complete all as specified and directed.

S & F in replacement of condenser fan of any make suitable for water cooler upto 40/80 ltrs capacity complete all as specified and directed.

S & F in replacement 15 mm dia PTMT connection of length upto 600mm with nuts on both ends complete all as specified and directed.

S & F in replacement condenser coil suitable for water cooler upto 40/80 ltrs capacity complete all as specifed and directed.

S & F in replacement steel/aluminium waste water tray suitable for water cooler upto 40/80 ltrs capacity complete all as specifed and directed.

S & F in replacement company sealed compressor unit of water coolers of capacity 40/ 80 ltrs complete all as specified and directed.

S & F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding fastening angles, as necessary gusset plates, rivetingetc conforming to Fe.29.Gde-E-165 complete all as specified and directed.

M & L for painting to new or previously untreated steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chromic primer in camaflage pattern or plain or pattern as decided by Engir-in-charge complete all as specified and directed. Common Notes for tem No 77.00 to 163.00 1. The contractor shall provide and deploy sufficient technician with helpers (as approved by GE / Engineer-in-charge) for maintenance of summer appliances at Tech Area and domestic area and contractor's site supevisor/site engineer shall report at 0900 hrs daily excluding Sunday & holiday to collect the complaints & complete the same complaint detailed by JE E/M /Engineer-in-charge with in 24 hrs. 2. The complaints shall be rectified with in 24 hrs. If the complaints is/are not complete on same day (except repair/ replacement of major items like repair/ replacement of compressor, cooling coil, condensing coil, fan motor ducting work of AC plant & insulation work. these work can be completed in time period (max 36 Hrs) as decided by Engineer-in-charge after which recovery shall be made as under), the recovery will be done as follows (a) After 24 Hrs Rs - 1000.00 Per complaint per day. The decision of GE on recovery against penalty shall be final and binding and No representation whatsoever shall be entertained. 3. The technicians for repair of summer appliances can be called during non-working days/hrs (i.e. Sunday, Holidays & after working hrs) for any vital complaint at AF Station Sarsawa. 4. The contractor has to produce job card duly signed by user & JE E/M to Engineer-in-charge.

M & L and T&P for attending complaints related to ceiling Fan, exhaust fan, wall fan, padestal fan etc any sweep, any type, any make fixed at different locations including taking down and refixing, cleaning all dirt, dust etc, replacement of connection lead/wire checkinng for loose connections in circuit, oiling and greasing split pins & other minor items, unserviceable screws assembly, bearing, re-fixing and testing to make it functional complete all as specified and as directed. Note: 1. Cost of capacitor, connecting wire,regulator,ball bearing ,gun metal bush,ceiling rose etc shall be measured and paid under relevent item. 2. Cost of petty stores such as grease, lubricating oil ,lock nut, cross pin, check nuts,rubber seal etc are deemed to be included in quoted rate.

M & L and T&P for attending complaints related to Geyser any capcity Inspection and maintenance of water heater (Geyser) of capacity, 25 lt to 50 litres including performing the following task at different locations at AF Stn Sarsawa complete all as specified and directed. (a) Removing Geyser & flow unit & heating element & cleaning the inner, tank with suitable acid/Replacement of defective connection lead. (b) Checking and setting of thermostat between 50 to 55 degree Celsius. (c) Check working of NRV stop cock, pressure release valve and servicing carefully to make it functional (d) Repairing of earthing connection, power switch, socket connection replacement of indicator lamp to make it functional (e) Examine water leakage and rectifying as required and replacement of rubber washer gasket etc to make it functional (f) Inspect over flow vent pipe, safety valve and remove blockage if required to make it functional. (g) Any other item required for making Geyser serviceable will be measured & paid seperately under respective items. Common Notes for Item No 164 & 165 (a) At least 01 electrician with 01 helper for day to day complaint rectification of Fan and Geyser at AF Station Sarsawa.(b) Contractor must insure sufficient store and T&P for geyser such as pipe wernch,screw driver etc and T&P for fan repair such as bearing puller, Plier,Tester screw driver etc for attending complaint and stationary such as complaint slips, Registers etc.(c) Obtain user signiture on complaint slip and register & submitting the records to the office of Engr-in-charge.(d) Complaints has to be attended within 24 Hrs failing which Rs 500.00 shall be duducted as recovery.

M & L for taking out of burnt coils of ceiling fan in replacement of all coils of ceiling fan motor, AC, 230 volt of 1200/1400 mm with super enamel copper winding wire of proper gauge, weight etc (having same nos of turns), winding using insulating materials varnishing, heating, baking, replacement of bearing, bush, shaft etc, re-assembling the fan after making it functional and testing, maintain the speed of fan complete all as specified and directed.

All as per Item No 169.00 here-in-above but for exhaust fan upto 450mm size/sweep complete all as specified and directed.

All as per Item No 169.00 here-in-above but for Wall Mounting fan upto 750mm size/sweep complete all as specified and directed.

All as per Item No 169.00 here-in-above but for Pedestal fan of any sweep/size complete all as specified and directed.

All as per Item No 169.00 here-in-above but cabin fan of any sweep/size complete all as specified and directed.

M & L for spray painting of ceiling fan ,exhaust fan wall mounted,Pedustal fan of any size any type with one coat of synthetic enamelled paint after cleaning and making good the old damaged paint complete all as specified and directed by Engineer- in-Charge.

S & F in replacement Fan capacitor up to 1.5 MFD complete all as specified and as directed.

All as per Item No 175.00 here-in-above but for capacity of capacitor 2.5 MFD complete all as specified and directed.

All as per Item No 175.00 here-in-above but for capacity of capacitor 3.15 MFD complete all as specified and directed.

All as per Item No 175.00 here-in-above but for capacity of capacitor 4 MFD complete all as specified and directed.

S & F in replacement Modular fan regulator step type one module minimum 100W (as per sample) complete all as specified and directed.

S & F in replacement Modular fan regulator step type two module minimum 100W (as per sample) complete all as specified and directed.

S & F in replacement Electronic fan regulator flush mounting having 4 step to regulate/control speed of celling fan complete all as specified and directed.

Supply only ball bearing/shaft suitable/as per exciting sample for exhaust fan, ceiling fan and pedestal fan/wallmounted fan/cabin fan etc complete all as specified and directed.

Supply only Gun metal bush for ceiling fan of any size/make/sweep complete all as specified and directed.

Supply only Gun metal bush for exhaust fan of any size/make/sweep complete all as specified and directed.

S & F ‘U’ clamps for hanging ceiling fan with all nuts & bolts, washer, suitable size with rubber real complete all as specified and directed.

M & L in replacement of rubber reel for ceiling fan suitable for 1200/400 mm sweep ceiling fan complete all as specified and directed.

S & F in repairs ceiling fan canopy with nut and bolt of suitable size complete all as specified and directed.

S & F in replacement of anti suicide fan rod 10" long white complete all as specifed and directed.

S & F anti suicide fan rod 18" long white/brown complete all as specifed and directed.

S & F in replacement of down rod for ceiling fan made out of 15 mm dia MS pipe complete with holes, slotted or threaded from 0.75 mtr to 1.5 mtr long complete all as specified and directed.

S & F nuts, bolts, washers, in any shape or size as directed including one coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S & F in replacemenmt of Fan blade for ceiling fan 1200/1400 mm sweep as per existing model complete all as specified and directed.

S & F replacement of Fan blade for Ventilating fan 200/250 mm sweep as per existing model complete all as specified and directed.

S & F replacement of Fan blade for Exhaust fan metal type any sweep as per as per existing model complete all as specified and directed.

S & F replacement of Fan blade for wall mounted fan any sweep as per as per existing model complete all as specified and directed.

S & F in replacement of metallic exhaust fan louvers of any shape (square or round as per site requirement ) upto 450 mm sweep complete all as specified and directed.

S & F in replacement of copper wound Fan motor for exhaust Fan upto 300mm sweep metal body any sweep complete as per matching to existing type and gauge complete all as specified and directed.

S & F in replacement of copper wound Fan motor for Ventilating Fan PVC body 250/200 mm sweep with front lock & capacitor complete as per existing model and gauge complete all as specified and directed.

Supply only in replacement of geyser flow unit / assembley made out of stainles steel as per matching shape/size or as per sample suitable for 25 to 50 litres capacity including safety valve complete all as specified and directed.

S & F in replacement copper heating element duly coated with anti corrosive material of rating 1.5 KW to 2 KW to geyser 25 to 50 litres capacity, any type, make / type as per sample complete all as specified and directed

S & F in replacement of the thermostat as per sample suitable for 50/25 litres capacity of geyser complete all as specified and directed.

Supply only the Auto cutt off as per sample suitable for 50/25 litres capacity of geyser complete all as specified and directed.

Supply only flexible SS braided connection havey duty stain steel 15 mm dia, length up to 750 mm long with union at both ends for 15 mm dia pipe complete all as specified and directed.

Supply only red and green indicator lamp as per existing size and shape complete all as specified and directed.

Supply only plug top, 3 pin, 15Amps complete all as specified and directed.

S & F in replacement switch piano flushtype single pole 15/16 Amp complete all as specified and directed.

S & F in replacement single pole and neutral enclosure with a two pin and earth plug and socket with MCCB 20 Amps capacity suitable fixing in a weather proof metal enclosure complete all as specified and directed.

Supply only Anchor bolt type fastner brass size 10mm upto 150mm length complete all as specified and directed.

Dismantling the flow unit, inlet,outlet pipe of Geyser & taking out to repair the inner copper/steel tank of capacity 25/35/50 letres storage capacity by brazing at different spots after cleaning rusted leaking places and making tank leak proof including refixing, re-assembling & testing complete all as specified and directed

M & L for painting of geyser 25 to 50 litres capacity with synthetic enamel spray paint with two coats of paint over one coat of red oxide primer including preparation of old surfaces complete all as specified and directed.

S & F of non return valve Brass metal vertical type size 15 mm complete all as specified and directed.

S & F for insulation of 25 to 50 Ltrs geyser as per existing insulating material in existing quantity for each geyser complete all as specified and as directed by Engineer-in charge.

S & F in replacement of Sheet metal enclosure factory made shutter type distribution board 2way (when MCBs are to be used) single pole and neutral, 240 Volts, with 200 Amp rated busbar, IP 43/IK09 (MCBs are to be measured & paid separately) complete all as specified and directed.

S & F in replacement of stainless steel water storage tank for upto 50 Ltrs capacity geyser as per existing gauge and shape complete all as specified and as directed by Engineer-in charge.

S & F in replacement of outer body 18 gauge complete with bottom and top cover as per matching to existing type and size for upto 50 Ltrs capacity geyser complete all as specifed and directed.

S & F tripple locking meter seal with atleast 150 mm stainless steel wire with polycarbonate locks complete all as specified and directed.

S & F in replacement of metal clad plug top 240 volts 20 Amps with two phase and neutral pins and one earth pin complete all as specified and directed.

S & F in replacement of metal clad socket 240 volts 20 Amps to fix two phase and neutral pins and one earth pin complete all as specified and directed.

M & L for making arrangement for fixing of exhaust fan on steel/Aluminium frame window/ making opening in brick wall as per site requirement and also making good to disturbed surfaces as per matching to existing complete all as specified and directed.

S & F in replacement of PCB card of BLDC Ceiling Fans of any make size or as per sample complete all as specified and directed.

Supply only modular type copper heating element inluding assembly upto 2.0 KW capacity of any make / model / type or as per sample complete all as specified and directed.

Supply only modular type thermostat suitable for 25 Ltr Geyser of any make / model / type or as per sample complete all as specified and directed.

S & F in replacement socket outlet 2in 1 , 5/6 Amp & 15/16 Amp flush type complete all as specified and directed

S & F in replacement MCB SPN 16 to 32 Amp single pole and neutral 'C ' curve , 10 KVA , 240 V complete all as speified and directed.

M & L for shifting of existing electric energy meter from existing location to directed location including box and connecting to existing submain circuit complete all as specified and directed.

ISHWAR ELECTRICALS AND PROCESS SERVICES (BID ID -3386018)

RAJAN TRADERS (BID ID -3384054)

HSEDRIG ENGINEERS AND CONTRACTORS (BID ID -3388067)

AKAALTECH (BID ID -3385513)

VIJAY ENTERPRISES (BID ID -3388220)

M/s Prakash Enterprises (BID ID -3386841)

R N Enterprises (BID ID -3386173)

Sharma Electrical and Engineering Works (BID ID -3387432)