SPECIAL REPAIRS TO ROOF TREATMENT IN BLDG NO P-27 (1 TO 8) OF 6 LANCER ALL COMPLETE TILING, REWIRING, WINDOW, SINK, WASH BASIN, ROOF AND DOORS AT BABINA CANTT UNDER GE BABINA

Amount

Demolition of PCC/lime concrete terracing including felt in any description and in any position over roof etc complete all as specified and directed.

M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed.

Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete surface still green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and directed. Note :- Water proofing compound shall be measured separately as supply only in item no 5

Supply only Liquid water proofing compound complete all as specified and as directed.

M&L applying water proofing treatment with the following mode :-

First coat of bitumen primer conforming to IS-3384 @ 0.4Kg / sqm complete all as specified and directed.

APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced torched application complete all as specified and directed.

3rd coarse : Third layer of bituminius aluminium paint @ 200Gm/Sqm in two layers each layer of 100gm/Sqm complete all as specified and directed .

Taking up or down existing 15 mm steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down existing 20 mm steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Supplying, fixing, jointing and testing 15mm galvanised steel tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed for the following sizes:-

Supplying, fixing, jointing and testing 20mm galvanised steel tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed for the following sizes:-

Fixing only old 15mm steel tubing and connections obtained from taking down before in new or old position fixed to wall, ceiling or laid in floor with new fittings complete all as specified and directed.

Fixing only old 20mm steel tubing and connections obtained from taking down before in new or old position fixed to wall, ceiling or laid in floor with new fittings complete all as specified and directed.

S&F 500 ltr capacity or rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked or make specified, two layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting including taking down of exisiting unserviceable tank complete all as specified in SSR Part -I complete all as specified and as directed

Disconnecting existing any size tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms ), complete all as specified and directed

S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Demolition of PCC in ground floor & pavings not exc 15 CM thickness below or above ground level etc complete all as specified and as directed.

M&L for 40mm thick PCC 1:2:4 type B1(using 20 mm graded aggregate) as in floor finishing complete etc complete all as specified and directed

M&L for 75mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectangular area of each tile exceeding 0.18sqm but not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and directed.

M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exc 0.36 sqm, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and directed.

M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick in cm (1:6) for laying floor finishes or receive tiles complete all as specified and directed.

M&L for 20-25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete all as specified and directed.

Dismantling, floor,hearth,or wall tiling incluiding cement mortar bedding (including backinng coat backing) etc complete including removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of wall or concrete surfaces in CM 1:4 finished rough to receive wall tiling etc complete all as specified and as directed.

M&L for joint free glazed coloured tiles 300x200x6 to 7mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but n exc 4 Sqm each etc complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each complete all as specified and directed.

Taking down shutters of any description not exc 1 sqm each complete all as specified and directed.

S & F of solid PVC door frame of size 50 mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, in opening as per specification & drawing, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) cunsisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and palin colour PVC sheet for top rail lock rail & botom rail on either side and as gap insert for top rail bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/selaed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification & drawing etc complete all as specified and directed.

S&F aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long etc complete all as specified and directed

S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type C-21, 100 mm size in toilet with PVC doors etc complete all as specified and directed

S&F aluminum handles cast type anodized 125 mm size etc complete all as specified and directed

Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but not exc full brick wall complete all as specified and directed.

S&F mild steel flat iron 25x3 mm as in hold fasts confirming to Fe 410-0 or Fe 310- all as specified and as directed.

S&F locally fabricated plain framed paneled shutter 35 mm thick IInd class HW (any number & Panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail and style as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated etc complete all as specified and directed

S&F locally fabricated 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of aperture 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed

M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and directed.

M&L one coat synthetic enamel paint on Old wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and directed

S&F powder coated aluminium window with double shutters (both gauzed and glazed) with and including alumnium grill and GI wire cloth 0.46mm dia of wire and 1.18mm aperture, fixed on aluminium frame 150 mm x 37.5 mm x1.5 mm thick, shutter with bottom rail, middle rail, top rail and styles of size 44.45 mm x 47.62 mm x 1.2 mm thick as per IS 737-1986 and glazed with tinted glass (Modi guard ) 5 mm thick as per standard practices and with handle, hinge & tower bolt arrangements complete all as specified and directed.

S&F in repair vitreous china squatting pan “ORISSA” pattern size 58X 44 (CM) star white with P or S trap front or back inlet with integral foot rest excluding flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified and directed.

S & F in repair 10 ltrs capacity PVC low level flushing cistern sleek plus single flush of colour star whire complete all as specified and directed. Make Cera/ Hindware/ Parryware/ Jaguar

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed

S&F in repairs 15mm dia concealed stop Cock regular body 15mm with flange complete all as specified and as directed.

S&F in repair angle cock fancy type CP cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15mm dia Bib taps, cast copper alloy, chromium plated with crunch or butterfly handle, screw down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F Cast Iron floor trap outlet dia 75mm with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack overall size 900mm x 900mm make out of 0.80mm thick stainless steel sheet etc complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall 110mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal 75mm bore with access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

S & F Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof 100 mm bore of pipe complete all as specified and directed.

M & L for complete removal of existing treatment of any description from walls and applying two coat of oil bound distemper over a coat of primer over 1 mm thick wall care putty (JK/Birla wall care putty ) including preparation of surfaces as per manufacurers instructions etc complete all as specified and directed.

M & L for complete removal of existing treatment from walls and applying two coat of cement based paint over a coat of primer over 1 mm thick wall care putty ( JK/Birla wall care putty) including preparation of surface complete all as specified and directed.

M&L, for preparing old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6. complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 including finished even and smooth (without using extra cement) complete all as specified and directed.

M&L, for preparing newly plastered surfaces of wall and applying three coat of white wash complete all as specified and directed complete all as specified and directed.

M&L, for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in filling and mass concrete, sub base/flooring complete all as specified and directed.

M&L, sand cushioning to under concrete interlocking paver block including watering & consolidation complete all as specified and directed.

M&L 60 mm thick machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement & pigment complete all as specified and directed.

M&L, for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in kerb complete all as specified and directed.

S&F in repair wash hand basin vitreous china (flat back) any size including cutting for and pinning in ends and CI brackets complete size (550 x 400mm ). Incl waster pipe and waste coupling complete all as specified and directed.

S&F only pillar taps 15mm dia cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered "Hot or Cold" complete all as specified and directed.

Demolition of brick work or stone boulder masonry, built in cement mortar as in quins arches, pillers, parapet etc but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

S&F in repair swivel shower of CP any colour for fixing with 15mm dia pipe with shower arm 15mm size, 195mm long with bend of 45 degree with flange of any colour complete all as specified and directed.

S&F in repair Brass chromium plated towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair CP Brass soap dish fixed to wall with cp brass screws etc complete all as specified and directed.

Cutting cheses, pinning in, making good to facing where required & pointing in CM 1:3 for concretes water tubing and like not exc 10CM girth in brick wall complete all as specified and directed.

S&F for 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed.

S & F Aluminum sliding door bolts, plate type, stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts for on bolts plate and two on staple plate and fixed 300mm long etc complete all as specified and directed

S&F, Aluminium handles, cast type, anodised 150mm long complete all as specified and directed.

S&F in repair fancy type PVC sheet coated MS conduit curtain rod 20 to 25mm dia with fancy knob type ends and brackets complete all as specified and directed

S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen or laboratory with plug, waste pipe, coupling, washers also including cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm complete all as specified and directed.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for foundation & for laying of pipe cable and getting out in soft/ loose soil complete all as specified and as directed.

Demolition and breaking drain pipe (salt glazed stoneware) set in cement mortar including packing under and haunching against side of pipe for 100 mm Internal dia of pipe complete all as specified and directed.

Supplying, laying, jointing and testing salt glazed stone ware drain pipe grade ‘A’ laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed for 100 mm Internal dia of pipe complete all as specified and directed.

Returning, filling in, including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed.

Removing excavated material to a distance n exc 50M and deposited where directed at a level n. exc 1.5M above the starting point complete all as specified and as directed.

M & L for concealed point wiring complete with PVC insulated and unsheathed flame retardant los smoke low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed for the following :-

One light point controlled by one switch complete all as specified and as directed.

One fan point controlled by one switch & regulator complete all as specified and as directed.

One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board complete all as specified and as directed.

One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board complete all as specified and as directed.

All as per Srl item No.84 above but one bell/buzzer point controlled by one switch complete all as specified and as directed.

Description all as per item No 84 but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.

S&F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed.

S&F switch bell push button type 5 Amp single pole complete all as specified and as directed.

S & F deluxe Fan Regulator electronic rotary, step type 240 Volt 50 Hz, complete all as specified as directed.

S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed

S & F 7W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent of Havells/Bajaj

S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and directed.

S&F Bell,DING DONG AC 230Volts,single pole type complete all as specified and directed.

M&L for submain wiring with two single core PVC insulated unsheathed, FRLS flexible copper conductor cable of sze 10 sqmm and one single core PVC insulated unsheathed, FRLS flexible copper conductor cable green colour of size 06.0 Sqmm as earth lead in & including PVC casing caping/ non metallic rigid PVC conduit medium grade and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and as directed. Make of wire : C & S , Polycab, Legrand,,Havells,KEI wires . Make of Casing Caping : Kalinga / universal/ Jain / Anchor/Polychamp.

S & F Regid non-metallic PVC conduit not less than 32 dia (external) ISI marked (on surface) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accessories such as couplers,lock nuts, saddles, pipe hook etc complete all as specified and as directed

S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar 8 ways 240 V complete all as specified and as directed .

S&F MCB single pole and neutral 40 Amp/63 Amp 240 V ,10KA , 'C' series, complete all as specified and as directed ith copper lugs

S&F MCB single pole 6 to 32Amps 240 V,10KA, 'B' series,complete all as specified and as directed with copper lugs

Supply and fixing in repair viva LED mini LED battan 20 W LED 6000k Decorative r LED fitting fixture with extruded polycarbonate, envirommentally friendly ,energy efficentinterated driver and 20 watts lamp fitted including wiring upto and terminal into existing ceiling rose complete all as specified and directed by Engr-in- Charge -Make :- Bajaj cat Part No.BCLAB 20W ( LED PRIDE 20W) or equivalent in Philips/Havells / C.G, Bajaj, or Surya)

S&F in repair 10 W BATTEN LED LED decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmently friendly, energy efficient with integrated electronic driver and 9W LED lamp fitted including wiring upto and terminating into existing ceiling rose complete all as specified and directed. Make:- Bajaj cat Part No.BCLSB 10NW ( LED PRIDE 9W) or equivalent in Philips/Havells / C.G, Bajaj, or Surya)

S&F light fitting 1 x10 watt bulkhead luminaries with LED 10 Watts, complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed Make :- (HAVELLS Cat part noRUGBYNEONFT10W LED760SSYMBONC Equivalent in C.G, Bajaj, Philips or Surya)

S & F in repair decorative wall light fixture made of polycarbonate , including LED Bulb 10 Watts ith copper lugs . Make:- Havells Cat LHFHCH1TL1W020 (FLORET) or equivalent Philips or Crompton.

Taking down ceiling fan for rewiring /repair works,keeping in safe and in servicable condition and refixing the same after repair works of building complete all as specified and as directed .

Supply and Fixing Exhaust fans AC single phase 230/240V of size 300 mm sweep, 1400 RPM with louvre complete including with all arrangement of making holes on wall, making good and finishing of disturbed surfaces matching with the existing surfaces, necessary fixing arrangement such as fastener bolts, nuts, washers etc, of appropriate size complete all as specified and as directed.

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as specified and as directed .

supply laying dry clean sand free from sharp materials, unscreened filling in trenches around under ground cables for cushioning complete all as specified and directed.

Supplying and laying precast concrete cable cover class LV type -I flat size 250x150x40 mm laid parpendicular to the axis of cable in trenches etc complete as directed. Make: Make: M/S MEHATAB TILES, Rani Shopping Centre, Bhanwar, Indore,(B) M/S NAVYA TILES, 68, NEHRU PARK, SARDARPUR,JODHPUR- 342003 Ph. 0291-2650094, 2627963(C) SAP PAVERS JODHPUR (D) SAGAR TILES SAHARANPUR (E) Star Tiles & Industries, Rama Devi, Kanpur

supply ,Laying and testing Cable XLPE Insulated ,sceened , PVC bedded Galvinised Steel strip or wire armoured ,electric power cables (heavy duty )1100 Volts grade with standared aluminium conductorof size 16 Sq mm 4 core to be connected to existing MCB box / Main switches complete all as specified as dircted. Note : 1100 volt Grade as per IS-7098/1988 Part-I :complete all as specified and as directed . Make as per PS Specifications/Clouse

S&F GI pipe medium grade, 15 mm dia bore including all fittings such as bend, tee, elbow, union, reducer etc. fixed complete to wall or laid in floor complete all as specified and as directed .

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weighting not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , protected by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excavation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified and as directed . NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

M/S RAJ KUMAR SINGH

M/S M S Constructions

M/S DEVINDER ENTERPRISES

JAI BALAJI CONSTRUCTIONS

M/S NARWAL TRADERS

M/s Indu Enterprises