Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹24.7 LAccepted-AOC R O VILLAGE POST OFFICE DOHAG TEHSIL JOGINDER NAGAR DISTRICT MANDI H P | 1 | Accepted-AOC L1 |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
7 Sept 2022, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
General Manager NMS
Directorate of Horticulture, Navbahar Shimla - 2
Construction of Reception Room Cum accommodation at COE Shillaroo, Distt Shimla, HP
2022_DOH_64078_1
Construction of Reception Room at COE Shillaroo
Open Tender
Civil Works - Buildings
Item Rate
180 days
COE Shillaroo Shimla
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,000
General Manager NMS
₹50,000
1 Oct 2022
25 Aug 2022
7 Sept 2022
25 Aug 2022
7 Sept 2022
27 Aug 2022
Amount
Land development work Cutting/Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
Centering and shuttering including strutting, propping etc. and removal of form work for :Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size)
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75mm dia pipe
(Civil Work) Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil
Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
Suspended floors, roofs, landings, balconies and access platform
Edges of slabs and breaks in floors and walls Under 20 cm wide
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)
Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing.1:1½:3 (1 Cement: 1½ coarse sand) : 3 graded stone aggregate 20 mm nominal size)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
Steel reinforcement for R.C.C. (HYSD Fe 500) work including straightening, cutting, bending, placing in position and binding all complete above plinth level
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinthin:Cement Mortar 1:6 (1 cement : 6 coarse sand).
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 1:6 (1 cement : 6 coarse sand) :
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand)
6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)
CEMENT PLASTER (IN FINE SAND)15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand)
CEMENT PLASTER (IN FINE SAND)12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand)
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer
providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Sal wood
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Kiln seasoned and chemically treated hollock wood 35 mm thick
Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 35 mm thick shutters Kiln seasoned and chemically treated hollock wood
Providing and fixing 10mm (ten millimetre) thick anti skid water proof stain and impact resistent heavy duty vetrified tiles NITCO/SOMANY/KAJARIA/CERA/JOHSON/Orient or equivalant 600x600x10mm (six hundred into six hundred into ten millimetre) manufactured of approved shade and colour in flooring treads of steps and landing laid over 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of materials with in all leads lifts and other incidentals as per direction of Engineer-in-Charge.The rate includes, octroi, Malkhana , Toll tax , Goods and Service Tax, building and other construction worker, welfare cess royalty or any other tax, levy or cess in respect of input for or output by this contract shall be payable by the contractor and Government shall not entertain any claim whatsoever in this respect of the same.
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete
6mm (six millimetre) thick glazed tiles of Kajaria, NITCO, Somany, orient, Rak,Johnson & Johnson/CERA in skirting risers of steps and dado upto any height on 12mm(Twelve millimetre) thick cement mortar 1:3 (One cement:Three sand) and jointed with cement slurry as per H.P.PWD. specification 1990 clause 13.7 and 13.8 including carriage of materials with in all leads lifts and other incidentals as per direction of Engineer-in-Charge.The rate includes, octroi, Malkhana , Toll tax , Goods and Service Tax, building and other construction worker, welfare cess royalty or any other tax, levy or cess in respect of input for or output by this contract shall be payable by the contractor and Government shall not entertain any claim whatsoever in this respect of the same.
providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Area of slab over 0.50 sqm
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) woodbased surfaces by thoroughly cleaning oil, grease, dirt and other foreign matter,sand papering and knotting including carriage of material in all leads and lifts.
Painting two coats (excluding priming coat) on new wood and wood based surfaces, with ready mixed paint, brushing to give an even shade including cleaning of all dirt,dust and other foreign matter,sand papering and stopping including carriage of material in all leads and lifts. : with enamel paint other than white
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (i)300x16 mm
(ii)250x16 mm
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (i)250x10 mm
(ii)200x10 mm
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm
Providing and fixing bright finished brass hard drawn hooks and eyes :150mm
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :20 mm dia (heavy type)
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to openings /wooden frames with rawl plugs screws etc
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). for exterior
Providing and fixing 0.60 mm (point sixty millimeter). thick prepainted steel sheet of making in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of plyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J of L hooks, bolts and nuts 6 mm (six millimeter). dia meter with prepainted limpet and rubber washers complete with all accesories as required as per the direciton of Engineer-in-Charge.make of TATA/JINDAL/KAMDHENU or equivalent as per satisfaction of EIC
Providing and fixing ridges or hips 60cm. (Sixty centimetres)overall with 0.60mm ( Zero point sixty millimeter) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20( Twenty ) microns over 5 ( Five ) micron primer coating + back coat of polyster of 5 ( Five) nicrons over five microns primer coating including fixing with prepainted iron, J or L hooks bolts and nuts ,6mm(Six milimetre) diametre and prepainted G.I limpet and bitumen washer complete with all accessories as required including carriage of materials within all leads, lifts and other incidentals.
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
Providing and fixing M.S B.P sheet 1.66 mm to 2mm ( One point sixty six millimeter to two millimeter) thick in eaves board/facia/soffits/ceiling including cutting , fixing and welding to steel roof members and applying a coat of red lead primer complete as per the direction of the Engineer-in-Charge (base member of steel work for support of ms bp sheet with welding included ) including carriage of materials within all leads, lifts and other incidentals.
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items .The contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. Wooden Shade
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre?painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4mm thick glass pane
WATER SUPPLY AND SANITARY INSTALLATION Excavation in foundation, trenches etc. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, de-watering and/or removal of slush and incidentals, lift up to any heights, stacking the excavated soil not more than 3 mtrs. (Three meters) clear from the edge of excavation and then retuning the stacked soil in15cm (Fifteen centimeter)layers, when required into plinths, sides of foundation etc; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.
Providing and fixing to wall ceiling and floor galvanised mild steel tubes (meduim grade) tube fittings and clamps including making good the wall, ceiling and floor including carriage of materials within all leads, lifts and other incidentals.15mm (Fifteen milimetres) nominal size ,
Providing and fixing PVC water storage tank multilayer of ISI :12701 marked , G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level including carriage of materials, within all leads and lifts as per direction of Engineer-in-Charge 1000 litres net capacity tank
Providing and fixing ISI marked high pressure PVC pipes spigot and socket waste and ventilating pipes including fixing with approved adhesive complete including carriage of materials within all leads, lifts and other incidentals. 75mm nominal size(Seventy five millimeters) kitchen
110mm.(One hundred ten milimetre).
Providing and fixing PVC fitting and accessories (a) single equal braches of required degree including carriage of materials within all leads, lifts and other incidentals. PLAIN BEND 75 mm dia nominal size (Seventy five millimeter).nominal size
110mm Nominal size(One hundred ten milimetres ).
Providing and fixing PVC Collars ISI marked including fixing with approved adhesive etc. complete, including carriage of materials, within all leads and lifts as per direction of Engineer-in-charge.. 75mm nominal size(Seventy five millimeters)
110mm nominal size) (One hundred ten millimeters)
Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive including carriage of materials within all leads, lifts and other incidentals. 110x90mm ( One hundred ten into ninety millimeter) size.
Providing and fixing orissa pattern vitreous China wash, down water closet (European type. W.C. pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (1 Cement : 1 Sand)(Seat cover to be measured and paid separately) including carriage of materials within all leads, lifts and other incidentals.Make of Jaguar/cera/hindware/parryware or equivalent as per satisfaction of EIC
Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers : Solid type a white plastic seat and cover
Providing and fixing PTMT jet spray of approved quality and colour with one metre tube.
Providing and fixing 110mm (one hundred ten millimeters) PVC size P or S strap for water closet (squatting pan (I.S.I marked including jointing the trap with pan and PVC pipe with apoproved adhesive etc.complete including carriage of materials within all leads, lifts and other incidentals.
Providing and fixing PTMT coloured / white high density polyethylene / polyethylene 10 ( Ten) litres capacity ( Full flush ) European standard control low level flushing cistern with fitting with a pair of brackets with fitting such as lead valve syphon 15 mm ( Fifteen millimeter) nominal size PVC ball and making good the same and connecting the flush bend with cistern and closet ( over flow ) pipe to be measured and paid for separately including carriage of materials within all leads, lifts and other incidentals.
providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern
Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I or M.S brackets painted white including holes and making good the same but excluding fittings(flat back including carriage of materials, within all leads and lifts as per direction of Engineer-in-Charge. 550X400mm(Five hundred into four hundred millimeters) flatback within all leads, lifts and other incidentals.
Providing and fixing stainless steel kitchen sink of approved standard ISI make with C.I or M.S brackets painted white including cutting holes and making good the same but excluding fittings, 470x420mm x178(Four hundred seventy into four hundred twenty milimetreinto One hundred seventy eight milimetre) with bowl depth 178mm.ncluding carriage of materials within all leads lifts and other incidentals.
Providing and fixing C.P. brass waste, 32mm (Thirty two milimetre).dia for wash basin sink including carriage of materials within all leads lifts and other incidentals.
Providing and fixing 100mm (One hundred milimetre) C.P. Grating for gully floor or brass waste, 32mm (Thirty two milimetre).dia for wash basin sink including carriage of materials within all leads, lifts and other incidentals.
Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials within all leads and lifts :-
Providing and fixing 600mm x450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers , including carriage of materials, within all leads and lifts as per direction of Engineer-in-Charge.
Providing and fixing towel rail stainless steel complete with flanges,screws ,including carriage of materials within all leads anmd lifts
Providing and fixing 600mmx120mm (Six hundred milimetre into one hundred twenty milimetre) glass shalf with C.P. brass bracket and guard rail complete fixed to wooden plugs with C.P. brass screws including carriage of materials, within all leads and lifts.
Providing and fixing brass full way valve with wheel,15mm (Fifteen milimetre) nominal bore. including carriage of materials, within all leads and lifts.
Providing and fixing C.P. brass bib tap with capstan head ,15mm (Fifteen milimetre)dia,including carriage of materials, within all leads and lifts.
Providing and fixing 15mm(Fifteen milimetre)dia C.P. brass pillar tap with capstan head including carriage of materials within all leads , lifts and other incidentals. .
Providing and fixing PTMT angle cock of chrome finished approved quality and colour including carriage of materials within all leads , lifts and other incidentals. .
Providing and fixing PVC ,. connection pipe with brass unions, 45cm. Length, 15mm nominal bore,including carriage of materials within all leads , lifts and other incidentals. .
Providing and fixing toilet paper holder stainless steel wall mounted including carriage of materials within all leads and lifts :-
Providing and fixing PVC cowl including carriage of materials within all leads and lifts :-75mm dia
Providing and fixing stoneware gully trap grade 'A' complete with C.I grating, brick masonry chamber in cement mortar 1:5 and water tight C. I. cover with frame of 300mmx300mm size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.72kg.(i) 100mmx100mm size P type
Constructing manhole with RCC top slab in 1:2:4 mix (one Cement : Two : sand four graded stone aggregate 20mm (Twenty millimeters) nominal size) foundation concrete 1:4:8 (One cement :Four sand : eight graded stone aggregate 40mm (Forty millimeters size) inside plastering 15mm (Fifteen millimeters) thick with cement mortar 1:3 (One cement : three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (One cement :two sand : four graded stone aggregate 20mm (Twenty millimeters) nominal size) finished smooth complete including curing and testing .Inside size 800 X 800 and 500mm (Eight hundred into eight hundred and five hundred millimeters ) deep including C.I cover with frame( light duty single seal pattern-I) (455 X 610 mm internal diamensions total weight or cover and frame to be not less than 38 Kgs (Thirty eight Kilogram’s ) weight of cover 23 Kgs. (Twenty three Kilogram’s ) and weight of frame 15 Kgs ) Fifteen kilogram’s). with 200 mm (Two hundred millimeters) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3(One Cement three sand)).including carriage of materials within all leads, lifts and other incidentals.
(SH:- Construction of Septic Tank, Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil as directeded by the Engineer-in-charges.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size) including carriage of materials, within all leads and lifts as per direction of Engineer-in-charge..
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: as dircetion by the Engineer-in-charge.Cement mortar 1:4 (1 cement : 4 coarse sand)
Providing form work with steel plates 3.15 mm (Three point fiftteen milimetres) thick welded with angle iron in frames, 30x30x5mm (Thirty into Thirty into five milimetres) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies upto height propping and centering below supporting floor to ceiling and removal of the same for insitu reinforced concrete and plain concrete work , including carriage of materials, within all leads and lifts as per direction of Engineer-in-Charge. Suspended floors, roofs, landings, balconies and access platform
Edges of slabs and breaks in floors and walls Under 20 cm wide
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size): including carriage of materials within all leads and lifts as directed by the Engineer -in Charge
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregateincluding carriage of materials, within all leads and lifts as dircetion by the Engineer-in-charge.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
15mm cement plaster on rough side of brick wall finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) including carriage of materials, within all leads and lifts as dircetion by the Engineer-in-charge.
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Square shape 450 mm internal dimensions
Providing and fixing 200mm cast iron rings with chequred or ribited non-solip surface including fixing in main holes with 200x200x200mm cement concrete, 1:3:6(One Cement three sand six graded stone aggregate, 20mm nominal size.
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Electrical installation Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 6 sq. mm + 1 X 6 sq. mm earth wire
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
Supply and fixing of angle Holder of light point complete with all connections and all labour charges with led bulb 12W of Make: Philips, Syska, GE, Bajaj, C&S, wipro,havels,crompton or equivalent as per satisfaction of EIC
Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-Exhaust Fan, Light duty, (Domestic) 300 mm sweep
Providing and installation of following type of ultra slim decorative LED batten with extruded aluminium heat sink, with anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required. Make: Make: Philips, Syska, GE, Bajaj, C&S,havels,crompton or any other approved by Engineer-in-Charge Led Batten 25 watt
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required .63 A
Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required
Providing and installation of stationary storage type Electric water heater (Geyser) of 25L Capacity of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall providing and fixing of Nonreturn valve, Dead weight safety valve, 2 No C.P. connection rods 18" longand making good the damages eletrical connection testing etc complete as required make -Usha/bajaj/orient/havells/Crompton or its equivalent as per satisfaction of EIC
Providing & fixing 50 W water proof LED street light fitting consist of Pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source with acrylic coverfor Nominal Voltage (V) 240 V, mains current .330 A , Suitable for pole dia Ø 43 mm (max.) Make:Havells, Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .