REPAIR OF HT 33 KV AND 11 KV SUB STATION EQUIPMENTS HT OVERHEAD LINE

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, for laying of UG Cable etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified & directed by Engr-in-Charge

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified & directed by Engr-in-Charge

Removing excavated material n.exc. 50m and depositing where directed at a level n.exc 1.5 m above starting point complete all as specified & directed by Engr-in-Charge.

Material and labour for sand cushioning with a layer dry clean Ganga river of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified. Note: Punned thickness 18 cm shall only be measured.

Material and labour for un-reinforced precast concrete cable cover HVP type 1, flat of size 300x180x40mm all as specified and directed by Engr-in-Charge

Supply and laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other for cable protection complete all as specified and directed.

M&L for boring hole under the road/payment /hard standing with the help of trenchesless technology using ultra sound technique and necessary machine complete including HDPE pipe of 100 mm dia suitable for 0.4 mpa working pressure not less than one metre below ground level complete all as specified & directed. Note : HDPE pipe of 100 mm dia will be deemed to be included in the quoted rate.Contractor should be quote the rate including HDPE pipe 100 mm medium grade.

Supply ,laying and testing XLPE insulated , screened, PVC bedded galvanised steel strip or wire armoured HT electric power cable heavy duty with aluminium conductor 11000 volts grade earthed cross sectional area 120 sq mm 3 core, laid in trenches/ducts /encased in GI pipe /fixed to pole including taking out of over head conductor/existing unserviceable cable all as specified and directed.

Supply ,laying and testing XLPE insulated , screened, PVC bedded galvanised steel strip or wire armoured HT electric power cable heavy duty with aluminium conductor 11000 volts grade earthed cross sectional area 240 sq mm 3 core, laid in trenches/ ducts /encased in GI pipe /fixed to pole including taking out of over head conductor/ existing unserviceable cable all as specified and directed.

Supply ,laying and testing XLPE insulated armoured heavy duty LT electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional area 300 sq mm 3.5 core ,laid in trenches/ducts /encased in GI pipe /fixed to pole including taking out of existing unserviceable cable/OH conductor all as specified and directed

S&F in trenches /fixed on pole / wall GI pipe of light grade,IS-1239 marked with required size of flat iron clamp duly painted with two coats of super enamal paint over a coat of red oxide primer complete with bolts, nuts and washers of sizes 80 mm bore for cable protection complete all as specified and directed.

M&L for trimming / cutting and removal /uprouting of unwanted trees branches / bushes, small trees including surface dressing and leveling by surface excavation wherever required below / near overhead line including spreading of anti vegetation chemical from Chandmari substation to 7 AF Hospital substation and inside Hospital area/Md accn complete all as specified and directed

Supply and fixing in replacement of DO Fuse element of current rating up to 30 Amps in fire resistance tube suitable for working voltage 33 KV complete all as specified and directed.

M&L for two coats of synthetic enamel painting on existing colour of Transformers 2 to 3.15 MVA as per color code after preparation of old surface including writing of SM/MES No. all as specified and directed.

S&F in replacement of switch air break gang operated triple pole mechanically operated mounted on insulator and steel frame with operating machanism worked from ground level for current rating upto 400 Amps suitable for working voltage 33 KV complete all as specified and directed by Engr-in-Charge.

S&F in replacement of switch air break gang operated triple pole mechanically operated mounted on insulator and steel frame with operating machanism worked from ground level for current rating upto 200 Amps suitable for working voltage 11 KV complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Lightning arrestor expulsion type complete with all fittings, transmissions class , discharge capacity 65 kilo amps suitable for 33000 volts and mounted on existing structure including replacement all clamp, nuts, bolts and washer etc.

M& L for earthing complete with galvanized steel earth plate electrode 60 cm x60 cm x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 Mtrs deep below ground level) with top edge of the plate not less than 1.50 Mtr below normal ground level connected to galvanized earth lead strip 32x6mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 connected to ear thing test point all as specified or indicated including testing on completion including PCC pit in (1:3:6) type C-2 cement concrete .RCC 1:2:4 Mix type B reinforced with 6mm dia MS bars @ 150mm RCC cover slab 40mm thick with two no’s fitting handle, GI pipe 20mm dia light grade with funnel & wire mesh for watering and 40mm dia light grade GI pipe for earth strip 32x6mm protection etc Earthing result not more then 2 ohm and test result duly signed complete all as specified and directed by Engr-in-Charge. Note: GI Strip 32 x 6 mm upto 7.5RM shall deemed to be included in this item.

M& L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6mm galvanised iron strip complete all as directed.

M&L for Chemical earthing complete with copper earth plate electrode 90cm x 60cm x 5mm, buried directly in ground( earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5m below ground level connected to and including copper strip of 32x6 mm protected with GI light grade pipe 40mm dia for earth electrode upto test point or upto 7.5 mtr whichever is less by means of bolts, nuts, check nuts and washers of copper washer all shown in electrical plate No 3 (of SSR part-I) connected to earthing test point all as specified or indicated including provision of necessary excavation and earth work of any type of soil, PCC pit , RCC cover, 50mm thick with 8mm dia TMT bar @ 100cm c/c both way , 20mm bore light grade watering pipe, water funnel, 40mm bore GI medium grade protection pipe, Bentinite powder, common salt, charcoal dust, returning filling, in of soil, removal of soil to a distance of not exceeding of 50 mtr etc, including testing on completion complete all as specified.Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 40mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance less than 1 Ohm is not obtained, the earthing will be redone at no extra cost.

Supply and fixing/laying of copper strip of size 32x6 mm as earth continuity conductor provided in between earth test point terminal and upto the equipment incl nuts, bolts and washers complete all as specified and directed.

To carryout the repair/servicing/overhauling and calibration HT VCB (with SF-6 Gas filled) panel by highly skilled mechanic / specialist including dismantling of operative mechanism parts, spring motor mechanism, well clening with petrol and CRC-226, replacement of unserviceable parts/accessories, oiling and greasing of moving parts, checking and well cleaning of insulators and re assembling of operating mechanism after complete over hauling refilling of SF-6 Gas as desired including captive synthetic current injection test as per IS 14658 : 1999 or IS 13516 : 1993 to check to tripping mechanism of HT VCB 11 KV, 400 Amps of Make: ABB complete all as specified and directed following capacities : - NOTE : (i) All repair/servicing/overhauling and calibration work shall be carried out by the manufacturers authorised representative/OEM. (ii) Cost of spares shall be measured and paid separately under respective item of Schedule 'A':-

(a) VCB (with SF-6 Gas filled) 11 KV 400 Amps indoor type (Incoming ) Make : ABB

(b) VCB (with SF-6 Gas filled) 11 KV 400 Amps indoor type (Out going ) Make : ABB.

Supply of following spares for 11 KV VCB, Make ABB : -

(a) Opening coil Y 1-24 V DC, Part No 1 V DC 000009 R 1.

(b) Closing coil Y 2-24 V DC, Part No 1 V DC 000014 R 1.

(c) Close push button, Part No ISF A616199R 1106.

(d) Open push button, Part No ISAF 616199R1104.

(e) Motor and gear assembly, 24V DC, Part No NHP 201491 R1.

(f) 2 PA mechanism with hex rod, Part No NHP 101985R002.

(g) Switch element S 826E/L, Part No NZN 000859P11.

(h) L Shape ON/OFF lever, Part No NHP417818P1.

(j) Linkage between K & A, Part No NHP 201703R1.

(k) Insulating washer K-A mech interlock, Part No NHP408187P1.

(l) Indicating lamp LED type

M & L for carrying overhauling / servicing of 33 KV Outdoor type VCB by adjustment of spring operated control mechanism assembly with checking and adjustment of stops, opening springs and shock absorber, oiling/greasing of all moving parts with recommended lubricant for smooth functioning from local and remote panel complete all as specified and directed. NOTE : All repair/servicing/overhauling and calibration work shall be carried out by the manufacturers authorised representative/OEM & Calibration test report to be submitted indicating before & after settings duly signed by contractor & Engg -in-charge.

Calibration and testing of VCB 33 KV remote control panel relays and checking & cleaning/decarbonising its moving & fixed contacts and ensure physical healthiness with visual check for healthy tripping of over current and earth fault, adjust tripping time, flag setting, ratio setting, instantaneous time setting etc as per installed capacity of transformer to be saved at maximum short circuit current with considering percentage impedance of transformer with artifical current injunction on primary side with current injunction machine and checking physical tripping verification of WTI and OTL, oil low level alarm bucholz alarm and trip, ensuring smooth functioning of VCB from local and remote switch complete all as specified directed. NOTE : All repair/servicing/overhauling and calibration work shall be carried out by the manufacturers authorised representative/OEM.

Material and labour for replacement of old rubber insulating mat of size 2Mtr x 1Mtr x 25 mm Thick for HT equiment ISI Marked all as specified and direceted. Make Jyoti / Jaipuria or equivalent as specified in Appx 'B' to PS.

S& F in replacement insulator pin type porcelain vitreous white brown or green including galvanized MS spindle two GI Washers and one GI Nut 150 mm height 150 mm dia for 11000 volts grade complete all as specified and directed .

M&L for Hard core, broken to gauge above 40mm and n exc 63 mm broken stone/boulders for loose filling at E/M installation complete all directed by Engr-in-charge.

Supply, jointing and testing in replacement of outdoor type cable end termination joint ,heat shrinkable) suitable for aluminium conductor cable of size 240 Sqmm to 300 Sqmm x 3 Core, 11000 Volts grade complete all as specified.

Supply, jointing and testing in replacement of outdoor type cable end termination joint ,heat shrinkable) suitable for aluminium conductor cable of size 120 Sqmm to 185 Sqmm x 3 Core, 11000 Volts grade complete all as specified.

Supply, jointing and testing in replacement of outdoor type cable end termination joint ,heat shrinkable) suitable for aluminium conductor cable of size 50 Sqmm to 95 Sqmm x 3 Core, 11000 Volts grade complete all as specified.

Supply jointing and testing in replacement of indoor type cable end termination joint (heat shrinkable) suitable for aluminium conductor cable of size 240 Sqmm to 300 Sqmm x 3 Core, 11000 Volts grade complete all as specified.

Supply jointing and testing in replacement of indoor type cable end termination joint (heat shrinkable) suitable for aluminium conductor cable of size 120 Sqmm to 185 Sqmm x 3 Core, 11000 Volts grade complete all as specified.

Supply jointing and testing in replacement of indoor type cable end termination joint (heat shrinkable) suitable for aluminium conductor cable of size 50 Sqmm to 95 Sqmm x 3 Core, 11000 Volts grade complete all as specified.

Supply jointing and testing in replacement of straight through joint (heat shrinkable) suitable for aluminium conductor cable of size 240 sqmm to 400 sqmm x 3 Core 11000 Volts grade complete all as specified.

Supply jointing and testing in replacement of straight through joint (heat shrinkable) suitable for aluminium conductor cable of size 120 sqmm to 185 sqmm x 3 Core, 11000 Volts grade complete all as specified.

Supply jointing and testing in replacement of straight through joint (heat shrinkable) suitable for aluminium conductor cable of size 50 sqmm to 95 sqmm x 3 Core, 11000 Volts grade complete all as specified.

Cleaning and preparation of old painted surface of HT six pole structure complete and painting with one coat of aluminium paint including channels, cross arms and making black & white strips with synthetic enamelled paint of 30cm height, each alternative strip upto 1.5 mtr height and writing pole numbers with yellow synthetic enamelled paint after making circular base with black synthetic enamelled paint and applying two coats of white wash on PCC coping complete all as specified.

Maintenance and complete overhauling of 11 KV VCB of existing make/type/mode/capacity including diassembling of operating mechanism parts well cleaning with petrol and CRC-226 and replacing unserviceable spare parts reassembling of parts including well cleaning the complete panel board,main busbar,decarbonizing all joints busbar CTS,PTS, spouts metal parts and making VCB perfect operating in manual and electric mode and calibration & checking of tripping system of 11 KV circuit breaker through IDMT over current and earth fault relay at plug setting infented inservice by primary current injection method to ensure proper function of trip coil control circuit etc. during fault condition setting by expert from authorised agency of state electricity board including submission of calibration certificate complete all as specified and directed.Note:- Spare parts required to make VCB functional will be measured and paid separately under respective items.

Supply only spare parts of HT 11 KV VCB all as directed. (Make of VCB : C&G/L&T)

(a) Shunt Tripping coil

(b) Volt meter 0 to 15 KV digital type with complete wiring

(c) Ammeter 0/20 to 100/200 Amp digital type with complete wiring

(d) Breaker control switch 10A 660V

(e) Electronic hooter

(f) Push botton Actuators with carrier & contact element- non -illuminated flush spring return push button with 1 NO blockl, 22mm dia Red colour

(g) Push botton Actuators with carrier & contact element- non -illuminated flush spring return push button with 1 NC blockl, 22mm dia Green colour.

(h) Integrated LED pilot lamp suitable for operating at ( AC/DC) Red colour

(j) Integrated LED pilot lamp suitable for operating at ( AC/DC) yellow colour

(k) Integrated LED pilot lamp suitable for operating at ( AC/DC) blue colour

(l) Integrated LED pilot lamp suitable for operating at ( AC/DC) green colour

(m) Toggle switch assembly

(n) Fuse holders for british pattern fuse links as per IS,13703 2A

(o) Fuse holders for british pattern fuse links as per IS,13703 5A

(p) TNC control switch

(q) Panel Heater Switch

(r) Closing coil

(s) Vaccum interupter for indoor VCB

(t) Spout incomming side

(u) Spout outgoing side

(v) VCB operating Handle

(w) Backelite Seat

S&F in repair strip type heater 40/60 watt approx 4"/6" in length complete all as specified and directed.

Supply, installation,testing and commisioning in replacement of control/charging motor for 11 KV, VCB type as per existing make & model complete all as specified and directed.

Supply and fixing,testing,commisioning in replacement of Numerical earth fault and over current protection relay 33 KV with Aux supply of 20 to 110V AC/DC with 2 NO+2NC contact of existing make including neccesary wiring complete all as specified and directed. Note: All T&P& accesories for testing is carried out by contractor and no extra payment to be done for Testing.

Supply and fixing,testing,commisioning in replacement of Numerical earth fault and over current protection relay 11 KV with Aux supply of 20 to 110V AC/DC with 2 NO+2NC contact of existing make & model including neccesary wiring complete all as specified and directed. Note: All T&P& accesories for testing is carried out by contractor and no extra payment to be done for Testing.

Supply and fixing,testing in replacement of 3 Phase 11 KV electric meter with enclosure Box fitted on wall including complete wiring with 11 KV VCB Panel complete all as specified & directed by Engr-in-charge.Note: All T&P & accesories for testing is carried out by contractor and no extra payment to be done for Testing.Test report to be submitted to the department.

Maintenance of 11 KV Main Power House comprising of checking of HT LT terminals,replacement of rusted nut bolts washer,cleaning of Panels,S/stn Rooms, painting the yard Gate,shutters, Room Gates with one coat of synthetic enamel paint as required and writing the designation of equipments in english alphabets/letters as specified and mainly the following:- (a) Step down Transformer 500/400 KVA, 11KV / 415 Volt - 05 Nos. (b) Step down Transformer 160 KVA, 11KV / 415 Volt - 01 Nos. (c) 11 KV indoor VCB, up to 630 Amps, 250 MVA with bus coupler - 07 Nos. (d) LT Control panel of various capacities - 05 Nos. (e) Voltage stablizer, 3 phase, indoor, 415 volt, 500 KVA - 02 Nos. (f) Iron Gate -02 Nos. (g) All remaining structure misc-01 lot. (h) Rolling shutters =04 Nos.

Labour & transportation for shifting of 11/0.433 KV transformer from one location to another location with in 7 AF Hospital area and making connections and testing complete all as specified and directed. Note : Safe transportation of transformer for shifting is responsibility of contractor.

Supply and laying in replacement of HT high voltage insulation mat made of elastomeric polymers material having a high insulation resistance thus imparting total safety to human being from any leakage current having high insulation resistance of class A of size 2.5 mm thick and 1 m width suitale for 11 KV confirming to IS-15652 : 2006 including pasting of mat with SR-998 by adding thinner as per requirement complete all as specified and directed.

Supply and fixing in replacement of cable route markers made of galvanised iron with embossing of HT Cable supporting MS angle of 75 cm long, for HT cable route marking duly embedded in and incl PCC (1:3:6) foundation up to 30 cm incl excavation and earth work.

Maintenance of 6 pole structure by disconnecting all incoming and out going joint and UG cable end terminal joint from GOD etc and rewinding/renewal of all joint with fresh joint & jumper cable with connector,nut bolts washer,HT taping including treatment of GOD contacts with conducting jelly complete all as specified and as directed.

Supply and Fix HT insulation tapes ISI Marked for terminating high voltage cables for insulation sealing of connection of wire and cable for bus bar insulation, transformer terminal insulation etc complete all as specified and directed.

Supply and Fix HT 11 KV Post insulators fixed on HT Busbar chambers with nut bolt washers as existing size complete all as specified and directed.

S&F in repairs cable jointing kit for 33 KV (Earthed) grade cable for outdoor termination heat shrink type end joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 300 sqmm complete all as specified and directed.

S&F in replacement pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 150mm height, 150mm dia for 33000 volts grade complete all as specified and directed.

Taking down top cover and refixing after proper cleaning,minor repairs of any, greasing and oiling of ball bearings,spring and runners complete of steel rolling shutters of area exceeding 5 sqm but n.exc 10 sqm complete all as specified and directed by Engineer-in-charge.

Dehydration,centrifusing & filtration of transformer oil of 3.15 MVA 33/11 KV transformer by mobile centrifusing & dehydation machine minimum capacity 1000 Ltrs/hours till the desired value of insulation of transformer oil electric strength as 70 KV at a gap 2.5 mm is obtained complete all as specified and directed. Note : Test Report to be submitted for BDV value before & after filtration of transformer.

Dehydration,centrifusing & filtration of transformer oil of 2 MVA 33/11 KV transformer by mobile centrifusing & dehydation machine minimum capacity 1000 Ltrs/hours till the desired value of insulation of transformer oil electric strength as 70 KV at a gap 2.5 mm is obtained complete all as specified and directed. Note : Test Report to be submitted for BDV value before & after filtration of transformer.

Supply and topping of new insulation oil (transformer oil IS-335 of 1983 marked) filtered and tested upto 70 KV di-electric strength at 2.5 mm gap in insulated sealed drum duly ISI marked complete all as specified and directed.

Supply & Fixing in replacement of Battery Bank of 15 Battery with 2 volt each with all connected accesories along with float cum Boost charger suitable for 30 volt with all connected leads all as specified & directed by Engr-in-charge.

Repair to earth pit & earth pit cover of any type and size by using PCC 1:2:4 and plastering in CM 1:3 complete including excavation,returning filling and removal etc complete all as specified and directed.

Supply and fixing porcelain transformer bushing with complete stud with brass nut bolt washers complete of 36 KV IS:3347 suitable for 33/11 KV, 3.15/2 MVA transformer complete all as specified and directed.

Maintenance and complete overhauling and testing of 11 KV , SF-6 Load break switch consist of two no. incommer & one no. Outgoing of existing make/ type/model/capacity including disassembling of operating mechanism parts, well cleaning with petrol and CRC-226 and replacing unserviceable parts, and accessories, oiling / greasing of moving parts includng reassembling fine setting of mechanism well cleaning and decarbonization of arc control pot fixed and moving contacts ,hinges contacts and repacement of unserviceable parts insulating oil and reassembling and making Load break switch in perfect operation including well cleaning the complete panel board, main busbar, carbonizing all joints,busbar CTs,PTs spouts metal parts and components etc and checking of fuse system complete all as specified and directed.Note:- (a)Spare parts i.e HRC fuses holders,TNC switch,Alarm meter,Ampere meter,nut bolts,operating handles, indication bulbs required to make functional will be included in the quoted rate. (b) Replacement of burnout control wiring of existing size required to make functional system is included in the quoted rate.

Material and labour for replacement of PG clamps, Parallel grove clamps, tee, clamps and GI nuts, bolts of required size and other connectors for connecting ACSR conductors for jumpring as per site complete all as specified and directed.

Supply, installation, testing and commissioning of the indoor type current transformer HT 11 KV ratio 50/25/5+5 of input VA-15 type KCT-02 conforming to IS-2705 Part-I of 1981, 50 HZ, HSV-12 KV accuracy limit factor ACP-10 insulation level class-1, 28/75 short time terminal current and hrs duration 13.1 KA for 3 second suitable for SF-6/VCB of existing capacity complete all as specified and directed.

Supply, installation, testing and commissioning of the indoor type 11 KV PT of ratio 11 KV/rt 3/110/vt 3/110 v/rt 3 class 0.5-3, burden 50 VA -50 VA, insulation level 28/75 KV, voltage factor 1.2 Cont and 1.9 for 30 sec, conforming to IS 3156.

Supply installation and testing of outdoor type (CTs) 33 KV current transformer -03 Nos Dry Type Polycrete having CT ratio 100/50/5+5 for connecting 33 KV side of Transformer bushing class 5P 15 VA burden suitable for protection, metering and differenent operation as specified and directed by Engr-in-charge.

Supply, installation, testing and commissioning of the outdoor typee 33 KV PT as existing at site conforming to IS 2705 complete all as specified & directed by Engr-in-Charge.

Supply and fix in replacement copper bus bar strips in the transformer studs for cable connections of exsiting size and capacity including necessary fabrication work with fresh nut bolts washers all as per directed by Engr-in-charge.

S&F for in replacement of air breather assembly complete with fresh blue colour silica Gel suitable for power transformer of capacity 3.15/2 MVA

S&F for in replacement of OTI Gauge suitable for power transformer of capacity 3.15/2 MVA complete all as specified & directed by Engr-in-charge.

S&F for in replacement of WTI Gauge suitable for power transformer of capacity 3.15/2 MVA complete all as specified & directed by Engr-in-charge.

Servicing & Maintenance of existing 33 KV MRS switch Yard at Chandmari S/Stn Comprising of 33 KV GODs, Air Break Switchs,Insulators,CTs,PTs,Lightening arrestors,33/11 KV transformer = 2 Nos, tightening of conductors,replacement of joints if any,cheking of transformer bushings, studs of etc duly applying petroleum jelly after cleaning the contact from the rust and deposited carbon including tightening of all the loose connections making good for operation including replacement of burnt,rusted nut bolts as existing including cleaning and preparation of old painted surface of HT Gantry system complete pertains to 7 AF Hospital HT suply system all as specified and directed.

Supply and fixing in replacement of HT 11 KV busbar outdoortype weather and vermin proof factory fabricated CPRI approved duly painted with two coat of enamelled paint,pedestal type made out of mild steel sheet 3.15 mm thick,factory made using angle iron 40 mm x 40 mm x 6 mm and 500 mm high,front opening double door shutter weather proof,rust proof, dust proof with provision of rubber gasket and locking arrangement including HT bush,insulator & busbar (80 x6 mm) with colour code - 03 Nos and making connection with suitable size of thimbles, nuts, bolts and washers etc incl necessary earth work to fix 60 cm above ground level.

Supply and fixing in replacement of danger notice plate of 1.6mm thick, MS sheet, vitreous enamelled white, with letters, figuers and conventional skull and bones in signal red colour and fixed with MS clamps made out of flat iron 25x3 mm, nuts-bolts, of approved size for HT 25x20 cm

S&F heat shrink LT end joints of size 120 sqmm to 150 sqmm

S&F heat shrink LT end joints of size 185 sqmm to 240 sqmm

S&F heat shrink LT end joints of size 300 sqmm to 400 sqmm

S&F heat shrink LT straight through joints of size 120 sqmm to 150 sqmm

S&F heat shrink LT straight through joints of size 185 sqmm to 240 sqmm

S&F heat shrink LT straight through joints of size 300 sqmm to 400 sqmm

NEW TECH ELCTRICALS