PROVISION OF 200 KVA DG SET FOR BLOCK-A AT CCET, SECTOR-26, CHANDIGARH.

DSR item no. 29.1.10 Supply, installation, Testing & Commissioning of ‘Silent Type Diesel Generating set as per CPCB IV + or better norms along with having Prime Power Rating of KVA as below, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor,(As per Complete Item No. 1 of the DNIT).

Foundation for DG Set DSR Item No. 2.6.1 (Civil) Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto1.5 m, as directed by Engineer-in-charge.

All Kinds of Soil

DSR Item No. 2.27 (Civil) Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

DSR Item No. 4.1.6 (Civil) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level:

1:3:6 (1 Cement: 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 40 mm nominal size derived from natural sources)

DSR Item No. 5.22.6 (Civil) Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

DSR Item No. 4.1.3 (Civil) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level:

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources)

DSR Item No. 13.1.1 (Civil) 12 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand)

DSR Item No. 5.9.2 (Civil) Centering and shuttering including strutting, propping etc. and removal of form for all heights:

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

DSR Item No.5.2 Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.

DSR Item No.5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

DSR Item No.11.1.27 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3½ X 185Sq mm (57mm)

DSR Item No. 15.16 SupplyingandlayingoffollowingsizeDWCHDPEpipeISI arkedalongwithallaccessorieslikesocket,bend,couplers etc.conforming toIS 14930, Part II complete with fitting and cutting,(As per Complete Item No. 12 of the DNIT).

160mmdia(OD-160mm&ID-135mmnominal)

DSR Item No. 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB/ RCCB/ Isolator).

4 way (4 + 12) Double door

DSR Item No. 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supply and laying of PVC insulated PVC sheathed Aluminium conductor cable of 1.1 KV grade as per IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid in existing RCC/ HUME / DWC pipe. The job include the cost of making connections with suitable size of Al. Lugs / thimbles, (As per Complete Item No. 15 of the DNIT).

300 Sq.mm. 3.5 Core PVC ArmouredAluminium conductor cable

Supply, erection testing and commissioning of L.T. Cubical panel indoor type with degree of protection IP–54 fabricated from 14 GMS (2mm) thick CRCA sheet and MS channel of size 50mmx50mmx6mm at the base and MS flat of suitable size (horizontal/vertical construction) in single piece for single supply respectively having separate fully compartment aliased and front and back side openable doors for each switch/BBC etc. Each door would be vermin dust proof. (As per Complete Item No. 16 of the DNIT).

LT Panel approx. size 1000 mm x 1000 mm

DSR item no.2.2 Providingandfixingfollowingratingandbreakingcapacity and pole MCCB with thermomagnetic release and terminal spreadersinexistingcubiclepanelboardincludingdrilling holesincubiclepanel,makingconnections, Ics=100%Icuand Operational Voltage 690V etc. as required.

400A,35KA,TPMCCB

100A,30KA,FPMCCB

Supply and laying of XLPE insulated PVC sheathed Aluminium conductor cable of 1.1 KV grade as per IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid direct on surface with the help of M.S. clamp of suitable thickness. (As per Complete Item No. 18 of the DNIT).

16 Sq.mm. 4 Core PVC ArmouredAluminium conductor cable.

95 Sq.mm. 3.5 Core PVC ArmouredAluminium conductor cable.

Please Enable Macros to View BoQ information