GE/ALP (8566) KOL OF 2025-26

Amount

Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15mm thick in CM (1:6) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick, set in cement mortatr (1:4), as on brick/concrete surface etc finish even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 10mm thick with CM (1:3) as on concrete surfaces and finished the surface even and smooth as in ceiling includiing necessery scafolding, chicken wire mesh etc complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer 3mm thick wall care putty on wall complete all as specified and directed.

M&L preparation of new surfaces of wall and applying two coats Exterior Acrylic Emulsion paint over at coat of primer on external surface incl nescessary scafolding complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying two coat of white wash on new surface etc, complete all as specified and directed.

M&L for preparation of old plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer 3mm thick wall care putty on wall complete all as specified and directed.

M&L preparation of old surfaces of wall and applying one coat Exterior Acrylic Emulsion paint on external surface incl nescessary scafolding complete all as specified and directed.

Providing anti termite (post construction) along the external wall below concrete or masonary apron using chemical Chloropyritphos 20 EC or linane 20 EC (ISI Marked) emulsion @ 2.25 literes per linear meter including drilling and plugging holes etc in aprons/plinth protection , complete all as specified and directed.

Providing anti termite (post construction) of soil under existing floors using chemical Chloropyritphos 20 EC or linane 20 EC (ISI Marked) emulsion @ one leter per holes , 300 mm apart along the junction of floor and walls including drilling and plugging 12 mm dia holes with cement mortar 1:2 ( 1 Cement : 2 coarse sand) to match the existing floors complete all as specified and directed.

Providing anti termite (post construction) at the point of contact of wood work by chemical emulsion ( in oil or kerosene based solution ) @ 0.50 leter / holes by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed.

Taking down chowkat or frames with shutter exc. 1.5 Sqm but n.exc. 4 Sqm each (without taking of shutters from the frames) complete all as specified and directed.

Easing of existing door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

S&F Powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size (91mmX31mmX1.55mm) and shutter of section (40mm X20mm X1.55mm) incl ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including taking down old steel windows with necessary all fittings complete all as per manufacturer's instructions and complete all as specified and directed.

Supply and fixing in repair powder coated aluminum window/ventilator (single leaf single shutter) side hung type with stainless steel butt hinges, one shutter glazed with and including 4.00mm thick plain sheet glass and other shutter with stainless steel wire cloth of 0.36 mm dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples, rubber gasket, stopper , aluminium grills of 70mm aperture, aluminium anodised handle 100mm long ,aluminium anodised tower bolts 100mm long and peg stay etc, size of aluminum frame shall be (100mmx50mmx1.55mm) and shutter frame shall be (40mmx20mmx1.55mm) after and including dismantling of old aluminium ventilator complete all as specified and directed. upto 12 storied bldg Note : 1 No Glazed shutter 1 No Gauged shutter and aluminium grill shall constitube one unit.

S&F powder coated aluminium ventilator louver type with frame, aluminium section weighing 0.55 Kg/M including 4mm thick glass/ss wire mesh necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc., complete all as specified and as directed

Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed. (upto 04 storey High of building)

M&L for PCC (1:5:10) Type E2 (using 40mm graded crushed stone aggregate) as in filling sunken floor complete all as specified and directed.

M&L 25mm thick PCC (1:2:4) Type B-1 ( using 20 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.

Supplying and fixing Mild Steel framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, railings and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed and design/shap approved.

Material & labour preparation of new steel and iron surfaces of any description area exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide and zinc chrome primer, complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer area exc.10cm width or girth over new wooden surfaces including preparation of surface complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillers etc complete all as specified and directed.

M&L for brick work with sub class 'B' bricks built in cement mortar (1:6) straight or curved on plan exceeding 6 mtr mean radius and complete all as specified and directed.

M&L for Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement mortar bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.(upto 10 storey High of building)

Dismantiling of floor hearth or wall tiling incl cement mortar (but not backing), and rubbish off the premises (out of MOD land), complete all as specified and as directed.

M&L for Non-skid coloured ceramic floor tiles 7 to 8 mm thick area of each tile exc .11 sqm but n exc 0.18 sqm in floor Screed bed or bedding layer 15 mm thick in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to to match the shade of tiles complete all as specified and directed.

M&L for Glazed ceramic coloured wall tiles of size (450x300x6)mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles Screed bed or bedding layer 10 mm thick in cement mortar (1:4) etc, complete all as specified and directed.

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal complete all as specified and as directed.

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal complete all as specified and directed.

Supplying and laying for 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all fitting in any grade complete all as specified and directed.

Supplying and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all fitting in any grade complete all as specified and directed

S&F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed.

S&F in repairs Vitreous China wash basin (coloured), Pedestral pattern, boul size (580 x 450) mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and directed.

S&F 32 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins,etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Cutting grooves/chases in cement concrete or brick wall / floor for taking down of GI pipe line and making good the disturbed surfaces to match with existing specification complete all as specified and as directed.

S & F in repair Soap dish, vitreous China white, approximate size (160x 160x90) mm embedded in the wall etc, complete all as specified and directed.

Supply & fixing in repair wash down water closet (pedestal pattern) including connection to drain (or outgoing pipe) and to flush pipe etc. and making good the damaged surfaces complete all as specified and directed.

S&F PVC water closet seat cover heavy duty coloured closed pattern with flat bottom and cover and mild steel CP hinnging device complete all as specified and directed.

S&F CP hand shower ( faucet) with one mtr flexible tube with wall hook complete all as specified and directed.

S&F in repair brass CP toilet paper holder to wall with chromium plated brass screws complete all as specified and as directed.

S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and directed.

S&F in repair 15mm bore Brass CP angular stop cock concealed or any type with crutch or butterfly handle complete all as specified and directed.

S&F in repair PVC connection 15 mm size pipe with PTMT nut of Length 450mm complete all as specified and directed.

S&F in repairs 15mm bore two way Bib tap CP fancy type with chromium plated crutch or butterfly handle complete all as specified and directed.

S & F in repair Brass chromium plated shower rose 125 mm size including fixing to steel pipe or union complete all as specified and directed.

S&F in repair wall mixture non telephonic brass CP tap for mixing hot and cold water including three joints to 15 mm bore pipes or union and pluging and screwing to wall complete all as specified and directed.

S&F in repair wash hand basin mixture Brass CP tap for mixing hot and cold water including three joints to 15 mm bore pipes or union and pluging and screwing to wall complete all as specified and directed.

S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F 40mm bore CPVC pipe with fittings complete fixed in wall/laid in floor complete all as specified and directed.

S&F for 75 mm diameter of outlet of PVC(SWR) floor trap,Plain with grating including jointing with solvent cement complete all as specified and directed.

Demolition of Reinforced Cement concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work up to four stories bldg complete all as specified and as directed.

M&L for RCC(Nominal Mix) in type-B1 (1:2:4) (20mm graded stone aggregate) pre cast slabs supported on walls for cup board, counter basin and Kitchen slabs,manhole cover etc complete all as specified and directed.

M&L for mild steel TMT bars 10MM dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete all as specified and directed.

M&L for treating the surface of old kota stone slab flooring with beeswax polish complete all as specified and directed.

S&F 18 mm thick Plywood, grade BWP, type BB, fixed with screws to timber frame as kitchen cabinate ,key board including all fitting and fixture items work complete all as specified and directed.

S&F 12 mm thick PVC Plywood, grade BWP, type BB, fixed with screws to timber frame as kitchen cabinate ,key board including all fitting and fixture items work complete all as specified and directed.

S&F in repair 6mm thick plywood in cupboards complete all as specified and directed. upto 12 storied bldg.

S&F prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination to timber frame work in Cupboard complete all as specified and directed.

S&F in repair Brass sliding door bolt 300 mm long with sand or dia-cast brass hasp, staple ( Bolt type) and fixing with rolled or drawn brass bolts complete all as specified and directed.

Supply and fixing in repair for 18/19mm thick block boards, grade 2 quality,interior grade, decorative type with decorative face veneer on both face fixed with screws to timber frame work as in cupboard shutter, Kitchen cabinate, work station etc .. including external teak wood lipping 6mm thick fixed with nails complete all as specified and directed.

Supply and fixing in repair for 0.9mm thickess of decorative laminated type 1 of surfaces finish,colour and pattern as approved fixed with approved adhesive as per manufacture,s instruction complete all as specified and directed.

S&F 30mm width of flaps Hydrolic type hinges mild steel bright finish or elec-trogalvanised complete all as specified and directed.

S&F for Brass Locks, cupboard, grade I, size 50 mm two levers complete all as specified and directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

Supply & fix 100 mm long Brass handles,cast type,polished bright complete all as specified and directed.

Supply & fixing in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed.

M&L for point wiring for one light/ bell/ fan controlled by one number one way switch complete with 1100 V grade FRLSH PVC insulated multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through in and including PVC concealed conduit of suitable size minimum 20mm dia medium grade ISI Marked complete with one run of 1100 V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl provn of modular type galvanised MS sheet pressed sunken box not less than 1.00 mm thick concealed on wall including fixing of modular cover platevof suitable modules with fixing screws for fixing of modular type switches/ socket/ fan regulator etc with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : (a)Proper colour code of wiring to be maintained. (b)Cost of Chase cutting shall be deemed in the unit rate.

S & F Modular type switch one way 6 Amps one module complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/Polycarbonate isolated body, 230 V complete all as specified and directed.

M & L for making suitable size hole on wall for fixing of 250 mm sweep exhaust fan and making good disturbed surface complete all as specified and directed.

SK CONSTRUCTION SYNDICATE & ENGG CO (BID ID -3462192)

DGR CONSTRUCTION (BID ID -3463888)

M/S SRINIVASA CONSTRUCTION (BID ID -3463800)

SINHA ENTERPRISE (BID ID -3463165)

KWALITY CONSTRUCTION (BID ID -3463086)

HYDROTEC (BID ID -3463893)

AZIM ENTERPRISES (BID ID -3462975)