Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.7 LAccepted-AOC 142 JAGJIVANRAM NAGAR GAROBA MAIDAN NAGPUR 440008 | NAGPUR | NAGPUR | MAHARASHTRA | 440008 | L1 | Accepted-AOC Being the lowest | |
| 2 | L2₹9.1 L+₹1.4 L (18.5%)Rejected-AOC 011 NAGAREWADI 612 NAGAREWADI POST PADALI TALUKA SHIRUR KASAR DISTRICT BEED 413249 BEED MAHARASHTRA 413249 UDYAM MH 05 0079863 | BEED | MAHARASHTRA | 413249 | L2 | Rejected-AOC Not being the lowest |
Tender Value
₹9.6 L
EMD Value
₹19,200
Closing Date
4 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AF Sonegaon, Nagpur
Bldg No. P-51, 44 wing Air Force Station, Sonegaon, Nagpur 440 005
PROVN OF TOILET FOR DMA AND NC(E) REST ROOM AT AF STN SONEGAON, NAGPUR
2023_MES_572583_1
8446/E8
Open Tender
Civil Works
Item Rate
180 days
Sonegaon
As per NIT
8 documents required · 8 mandatory
₹500
AGE (I) AF Sonegaon
₹19,200
Yes
6 Mar 2023
2 Jan 2023
9 Feb 2023
2 Jan 2023
4 Feb 2023
16 Jan 2023
2 Jan 2023 - 9 Jan 2023
Amount
Surface dressing not exceeding 15cm deep in soft/ loose soil complete all as specified and directed.
M&L for providing PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling mass concrete complete all as specified and directed.
Excavation over areas in soft/ loose soil n. exc. 1.50m deep and getting out complete all as specified and directed.
Excavation over areas in soft/ loose soil exc. 1.50m and n. Exc 3.00 deep and getting out complete all as specified and directed.
M&L for 100mm thick sand bed under sub base of foundation complete all as specified and as directed.
Excavation in trenches in soft/ loose soil n. exc. 1.50m wide and n. exc. 1.50m deep for foundation, or for shafts, wells, cesspits, manholes, etc., n. exc. 10 sqm on plan getting out complete all as specified and directed.
Removing excavated soil exceeding 250m and not exceeding 500m and depositing where directed complete all as specified and directed.
Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
M&L for hardcore of broken stone or boulders of gauge not exceeding 63mm,deposited, spred and levelled in layer not exceeding 15cm thick, watered and rammed to true surface complete all as specified and as directed.
M&L 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.
M&L for PCC 1:4:8, type D2, using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified and as directed.
M&L for providing RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc., and mass concrete complete all as specified and directed.
M&L for providing RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in chajjas complete all as specified and directed.
M&L for providing RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping, channels, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc. complete all as specified and directed.
Use and waste of formwork to foundations, fillings, bases of columns, rafts & raft beams, sides & soffits of foundation & plinth beams and similar works; vertical or batter for rough finished surface of concrete complete all as specified and as directed.
Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, including supports, overhangs, etc. also splays between floors and beams complete of flat rough finished surfaces of concrete all as specified.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for mild steel TMT bars 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and as directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitred cut at two corners and joined by inserting two No. 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall by drilling and providing 100mm long MS screws with PVC fasteners complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fix in frame complete all as specified and as directed.
S&F mild steel butt hinge, medium weight cold rolled 100mm size all as specified and directed.
S&F in extruded aluminium alloy handle cast type anodised 150mm size all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed.
S & F Aluminium anodised ,Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
S&F aluminium alloy anodised sliding door bolts 300mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.
S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.
S&F figured glass 4mm thick quality pin head type and glazing with oil putty in sequence not exceeding 0.5 sqm in each pane complete all as specified and as directed.
S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
M &L for PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in block for hold fast block or similar work and finished the surface with existing and including form work complete all as specified and as directed.
M&L for Fe 410-W (Gde-E- 250) quality-A Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.complete all as specified and as directed.
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment. Fe 410-w (Gde-E-250)quality A complete all as specified and directed.
S&F 16mm to 20mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm and not exc 30cm long complete all as specified and directed.
M&L for Fe 410-W (Gde-E- 250) quality-B Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc complete all as specified and as directed.
M&L for 100mm thick PCC 1:3:6, type C2, using 40mm graded stone aggregate as in sub base of flooring all as specified and as directed.
M&L Non - skid Ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors laid over 15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M & L for Glazed coloured ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including a backing coat in Cement Mortar 1:3, 10mm thick complete all as specified and as directed.
M&L for 100mm thick PCC 1:4:8, type D2, using 40mm graded stone aggregate as in sub base of flooring all as specified and as directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 metre mean radius with old size bricks built in CM 1:6 all as specified and as directed.
M&L rendering 15mm thick in cement mortar (1:6) with sagol finish on fair faces of brick/ concrete surface and the surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering in Cement Mortar 15mm thick in two coats, i.e, in Cement Mortar 1:4, 5mm thick mixed with liquid water proofing compound as per manufacturers' instructions over in Cement Mortar 1:6, 10mm thick on fair faces of brick/concrete surfaces, finished even and fair externally all as specified and as directed. Note: WPC will be measured and paid separately.
M&L rendering 15mm thick in cement mortar (1:4) with sagol finish on fair faces of brick/ concrete surface and the surface finished fair and even complete all as specified and directed.
M&L preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.
Material and labour for applying three coats of white wash on walls including preparation of newly plastered surfaces all as specified and as directed.
M&L preparation of new steel surfaces of any description not otherwise described over 10cm girth or width and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M &L for preparation new steel and iron surfaces not otherwise described n.exc 10cm width or girth and applying two coats of synthetic enamel paints over one coat of primer of red oxide complete all as specified and as directed.
S&f pre-painted galvalume aluminiun zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with J hooks including self tapping screws and self drilling screws of appropriate size with rubber washer for water tight fixing complete all as specified and directed.
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for precast cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in precast cover slab with plain faces for manholes set in cement mortar (1:6) including necessary form work complete all as specified and directed.
S&F vitreous china wash basin of size 550mm x 400mm including waste, chain & plug and porcelain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or erecting bracket and 32mm dia waste fitting brass chromium plated for sink etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waste pipe fitted complete all as specified and directed.
S&FWaste coupling of PTMT (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gms complete all as specified and directed.
S & F Vitreous china wash water closet pan ( Pedestal pattern) white fixed in floor including trap, connecting to drain ( or outgoing pipe ) and flush pipe, anti syphonage pipe, flush pipe to pedestal pan including all joints etc. complete all as specified and as directed.
S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and as directed.
S & F sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.
S&F 600mm x 450mm bevelled edged looking mirror 6mm thick with aluminium frame work fitted with 6mm thick commercial ply or AC sheet backing to mirror complete all as specified and directed.
S&F in PVC valveless, syphonic action type, flushing cistern 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including 38mm dia flush pipe of polyethylene, connection to water pipe and seat complete all as specified and as directed.
S&F Health faucet (ABS Body ) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
S&F Brass chromium plated shower rose 125mm size with swivel joints including Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour including fixing to steel pipe or union complete all as specified and as directed.
Supply and laying of 20mm bore GI tubing medium grade with all fittings including cutting for branch line & making threads complete fixed to wall/flooring /ceiling etc or laid in trenches all as specified.
All as per Item No 61 here in before but 15mm bore
S & F stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes for union & fixed of size 15 mm bore complete all as specified and directed.
Supply and fix 20mm bore gun metal globe or gate valves with iron wheel head screwed both ends for GI pipe complete all as specified and directed.
S&F Bib tap 15 mm bore, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle confirming to IS screwed down, screwed for iron pipes or for brass ferrule, complete all as specified and as directed.
S&F 15mm bore Pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F Rotational Moulded Polyethylene water storage tanks, three layered (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part - I of capacity 1000 litres complete all as specified and as directed.
S&F ball valve PTMT with epoxy coated aluminium rod for 20mm bore pipe, weight not less than 210gms, high pressure with polyethylene high density float and complete screwed for iron pipe complete all as specified and as directed.
S&F 75mm dia oulet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F 110mm dia UPVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches etc. complete all as specified and directed.
S&F 110mm dia UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. complete all as specified and directed.
S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof suitable for 100mm dia pipe complete all as specified and directed.
S&F UPVC (SWR) bend any radius suitable for 110mm dia pipes complete all as specified and directed.
S&F UPVC (SWR) Tee any radius suitable for 110mm dia pipes complete all as specified and directed.
S&F PVC (SWR) 'P’ trap of 110mm dia pipes complete all as specified and directed.
S&F PVC (SWR) vent cowl of 110mm dia complete all as specified and directed.
S&F 75mm dia UPVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches etc. complete all as specified and directed.
S&F UPVC (SWR) bend any radius suitable for 75mm dia pipes complete all as specified and directed.
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
M&L 200 mm dia (internal) SGSW pipes grade ‘A’ laid in trenches jointed in CM 1:2 and tested after the pipes are laid jointed complete all as specified and directed
M&L for cement concrete (1:4:8) type DC-2 using 40mm graded stone aggregate as in concrete bed to 200mm dia SGSW pipe including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and as directed.
Supply only liquid water proofing compound
M&L for concealed point wiring complete with 1.5sqmm (nominal area) PVC insulated unsheathed multistranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed in wall/ floor and fixed on ceiling/ roof etc. including new pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., complete all as specified and directed for:-
One light/ exhaust fan point controlled by one switch.
Supply and fix switch piano, flush type, single pole, one way, 5 Amps, 230 volts all as specified and directed.
S&F ceiling rose surface backlite, 65x50mm, three terminals, 5 Amps,240 Volts AC complete all as specified and directed.
S & F Exhaust fan, steel body, AC single phase 230V of size 300 mm sweep with blades, frame and louvers complete all as specified & directed.
Supply and fix LED tube light fitting capacity 20 watt fixed on wall/surface / ceiling with all accessories tube,driver,with surge protector complete wired with multistranded copper cable & connecting to ceiling rose with 3 core ,multistranded flexible copper cable complete all as specified and directed. Make CG CAT Part No- LDL-20-NW or its equivalent in Havells/philips/Bajaj.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, SPN, 4 way, 240 Volts, single door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall complete all as specified and directed. Note: MCBs shall be measured and paid separately.
Supply, fix, connecting and testing MCB single pole and neutral (MCB SPN), 32Amps, 240 volts of rupturing capacity 10kA, C curve type complete all as specified and directed.
Supply, fix, connecting and testing MCB single pole (MCB SP), 6 to 32Amps, 240 volts of rupturing capacity 10kA, C curve type complete all as specified and directed.
Removal of excavated materials to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
Supply, lay / spread in trenches clean dry sand to required width and depth at bottom and top of cable including spreading, levelling, punning for laying/ cushioning of cable all as specified and as directed. Note : Punned thickness only will be considered for payment.
Supplying and laying common burnt clay sub class ‘B’ bricks of size 230 mm x 115 mm x 75 mm, laid perpendicular to axis of cable for protection of LT cables complete all as specified and directed.
Supplying & laying GI Tubing 25 mm dia Light grade pipe with connecting acessories complete in trench for road and on surface/,wall for protection complete all as specified and directed.
M & L for drilling suitable dia horizontal bore holes for insertion/ laying of GI pipe of any description below/ under road surfaces / floor etc with using mechanical or manual devices including making good the road with necessary returning filling and bituminious portion with concrete and bituminious mixture and cemented portion with PCC in 1:2:4 , 15 cm thick from top and matching the surfaces with existing complete all as specified and directed.
Supply and lay in trenches/drawn through pipes or in road crossings / paths/ drains / ducts / floors / along poles / equipments etc., of LT cable under ground, XLPE insulated, screened, PVC bedded, galvanised strip or wire armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade of cross sectional area 10 Sqmm 2 core including connecting up using suitable size aluminium lugs testing and commissioning complete all as specified and as directed. Note : Excavation earth work, sand cushioning and brick protection shall be measured and paid separately.
MAHARASHTRA ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .