CA NO GES U 13 2023 24 ADDN ALTN OF BLDG NO NP 12 PROVN OF DRAIN PROVN OF COVERED SHED PROVN OF TOUGHENED GLASS RAILING AND REWIRING OF BLDG NO NP28 UNDER GE SOUTH UDHAMPUR

Amount

Demolition of brick work or stone masonry built in cement mortar, or cement lime mortar including all quoins, arches pillars etc complete all as specified and as directed.

Providing false ceiling GI frame work for seamless ceiling comprising of GI perimerter channel 0.55 mm thick with two unequal flages of 20 to 30 mm and web of 27 mm fixed to surrounding wall using screws at 452 mm C/C channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm C/c with GI cleat and steel expansion or sutable hanging from soffits\trusses\bracking supporting hanger compressing of GI wire 4 mm thick 600x600mm size asbestos cement plain E-boards designer ceiling, fixed to GI grid work with screws and applying on new surfaces two coat of distempers and one coat of primers complete all as specified and as directed.

Dismantling Asbestos cement (corrugated or semi corrugated ) sheets as in roof covering complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , eves/facia board work fixed with self tapping screws as specified.

Dismantling framed work, timber scantling in fillets, rails, posts, rafters, purlins, etc 40 sqcm and over in section, in any position complete all as specified and as directed.

Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar any description complete all as specified.

Brick work with sub class "B" bricks straight or curved on plan exceeding 6 Metre mean radius in cement mortar 1:6 complete all as specified and as directed.

Rendering 15 mm thick in CM 1:6 on brick work and finished fair and even without using extra cement complete all as specified and as directed.

Rendering 15 mm thick in CM 1:4 on brick work and finished fair and even without using extra cement complete all as specified and as directed.

3mm thick wall care putty on surfaces of wall complete all as specified and as directed.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 Ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

Preparation of surfaces of wall and applying two coats of oil bound distemper complete all as specified and as directed.

75 mm thick PCC 1:4:8 type D2 using 40mm graded aggregate as in sub base of floor etc complete all as specified and as directed.

Rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:4 on vertical surfaces/backing coat complete all as specified and as directed.

Glazed ceramic coloured tiles of size 300x600x7mm wall tiles set and jointed in neat cement and in white/coloured cement to match with the colour of tile etc, complete all as specified and as directed.

25 mm thick PCC 1:2:4 type B1 using 20mm graded aggregate as in level course on floor etc complete all as specified and as directed.

Double charged vitrified tiles light Shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Double charged vitrified tiles light Shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm, in vertical surface as in skirting/dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed in CM 1:4 complete all as specified and as directed.

18-20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window sills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab complete all as specified and as directed.

75mm thick cement concrete 1:3:6 type C-2 using 20mm graded crushed stone aggregates as in plinth protection finished fair and even with using extra cement complete all as specified and as directed.

Hardcore of broken bricks n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and as directed.

Rolled section of hollow tubes/angle iron as in main and cross beams, hip and jack rafters , purlins, posts where connected to common rafters and running rails and guides for sliding gates, doors fixed with angle cleats or other connecting plates complete all as specified and as directed.

Framed work such as grill, gratings, etc with ends of bars shouldered and/or riveted or forged in to spikes, framed guard bars, barred iron doors ladders framed balusters and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Form work to sides and soffit of floor or roof beams lintels, beam haunching ,girders lintel cantiliver including supports overhung etc complete all as specified and as directed.

RCC type B1 1:1.5:3 of type B1, 20mm graded crushed stone aggregate for for lintels bends and roof bends complete all as specified and as directed.

Mild Steel TMT bars 10mm dia and over cut to length bent to shape reqd including cranking bending spirally for hooping for columns hooking ends and binding with M. S wire annealed not less than 0.9mm dia complete all as specified and as directed.

All as per Ser No 28 above but 5mm dia and over up to and including 10mm dia as in stirrups complete all as specified and as directed.

Anodised aluminium Partition , ventilator shutters, window/ fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, glass/particle board, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

Taking down chowkhats with shutter (without taking off shutter) exc 1.5 sqm and n exc 4 sqm each complete all as specified and as directed.

Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm each including iron mongry complete all as specified and as directed.

PVC wall lining consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site including PVC frame as per site requirement complete all as specified and as directed.

Dura stone heavy duty vitrified tiles of size 300 x 300mm x8-10mm thick as in floors set and jointed in neat cement slurry and pointed in white cement to match the surface including 15mm thick screed bed in cement mortar in 1:6 complete all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

Aluminum alloy powder coated (50 micron) anodized door frame of section 100 mm x 44 mm x 2mm thick,door shutter of aluminum section of size 85 mm x 44 mm x 2 m thick, top rail and both styles of size 100mm x 44 mm x 2mm thick, lock rail and bottom rail of size 115 mm x 44 mm x 2 mm thick including aluminum anodized snap beading and rubber packing & 5mm thick colour designer glass including , 200 mm long tower bolt-2 Nos, 200 mm long Aluminium handle- 02 Nos on each leaf, 4 lever lock brass 100 mm long mortice lock & double action floor door spring heavy duty suitable for shutter for each leaf complete all as specified and as directed.

Powder coated (50 micron of approved colour) Aluminum anodised double shutter window (glazed and wire gauge) side hung with aliminium window frame or chowkat 1.50 mm thick sheet & section aluminium anodised of size 100 mm x 44.50 mm and window shutter frames made of (middle, top rail, bottom) and styles 1.5 mm thick aluminium anodised sheet & section of size 44.5 x 44.5 mm including aluminium grill and all fittings such as rubber gasket aluminum glazing clips locking cabinet and 75 mm handle and including 4 mm thick tinted glass pane in panes glazed shutter fixed with rubber gasket and glazing clip/aluminium beads and with stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples on gauge shutter including aluminium tower bolt 75mm 02 Nos in each shutter, aluminium hinges 100mm B-12 02 Nos in each shutter, aluminium handle 100 mm 01 No in each shutter including all accessories complete all as specified and as directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder which keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and as directed. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Toughned glass 8mm thick (etching design as approved by GE as in windows, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Wall cladding tiles n exc 1.0 Sqm stone series on exterior wall surface design and size as approved by GE as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Excavating in trenches not exceeding 1.5m wide and n.exceeding 1.5m in depth; for foundation etc or similar work and getting out in soft/loose soil complete all as specifed and as directed.

Plain cement concrete 1:2:4 type B-2 using 40 mm graded crushed stone aggregate as in channels and drains, foundation and similar work etc complete all as specified and as directed.

PCC 1:2:4 type B0 (using 20mm graded crushed stone aggregate) as in coping, benching and similar work etc including necessary form work complete all as specified and as directed.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25cm complete all as specified and as directed.

Removing excavated soil to a distance exc 50m and n exc 1.50 km out side defence land complete all as specified and as directed.

Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) for drain cover,manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4) complete all as specified and as directed.

300 mm dia Reinforced concrete pipes, class NP-2 laid and jointed complete with collars complete all as specified and as directed.

Cement concrete 1:4:8 type D-2 for concrete bed to 300 nmm dia RCC drain pipe including packing under , and haunching against the sides of pipes after they are laid & testing complete all as specified and as directed.

75 mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in sub base for receiving floor finishes finished even and fair complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Machine pressed (factory made) precast plain cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate), kerb stone & the like of size 300mm x 300mm x 100mm thick or of size as approved by GE, with plain fair faces including chamfers, weathering etc, embedding in position/laid in trenches on edges of roads, including excavation in any type of soil, setting in cement mortar (1:4) returning filling and removal of surplus soil/debris to a distance n.exc. 50m from the starting point, complete all as specified and as directed.

Stainless steel grade 316 decorative designer railings, staircase, grills, covers, sitting place, shed etc. (design and pattern as approved by GE) made out of SS pipes mirror or wire brush finish, SS flats (plane or chequred) & SS plates cutting to desired shape, 1D Finish etc. complete with and including required cutting, notching organ welding, riding and drilling counter sunk holes, as required and bending to required shape by mechanical means in factory as per site requirement without forming wrinkles and butting and buffing / polishing fixing with necessary nut bolts and fixtures and filling the holes with micro concrete complete all as specified and as directed.

Supply and fixing 10mm thick, toughened glass clear or frosted as in railing, door shutters, partitions, shelves etc including fitting and fixtures such as glass handles SS studs, fittings for door pivots/stainless steel railing including SS locks complete all as specified and as directed.

Supply and fixing of 12mm thick, toughened glass clear or frosted as in railing, door shutters, partitions, shelves etc including fitting and fixtures such as glass handles SS studs, fittings for door pivots/stainless steel railing including SS locks complete all as specified and as directed.

Wall cladding exterior Ceramic tiles (stone series) in vertical surface 300x450x7mm or 300x600x7mm thick or size as approved by GE laid over 10 mm thick rendering/backig coat in CM 1:4, set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exc 0.5 cum in soft/loose soil getting out, returning filling in and ramming around in layers not exceeding 25 cm complete all as specified and as directed.

PCC 1:2:4 type B2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Hand rails, half round or other stock section or core for wooden hand-rail straight portion drilled and countersunk for balusters running bars, for doors, baulsters, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing bolts, posts and struts in fencing including cutting lops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc complete all as specified and as directed.

Rolled mild steel Fe-0410w (Gde-E-250) quality 'B' roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heaby bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc complete all as specified and as directed.

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power/ LED Light fittings) complete fitting such as switch, sockets, ceiling rose, pendants socket any type, rectangular board terminal boxes etc and making good disturbed surfaces of walls floors and ceiling complete all as specified and as directed.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and as directed.

Taking down Old/ Unserviceable MCB DBs TPN / Main Switches by disconnection of electric connection including old unserviceable MCCBs,MCBs, isolators etc and making good to distrubed surface complete all as specified and as directed.

Disconnecting and taking down un serviceable light fittings of any description/ capacity complete all as specified and as directed.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.5mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly complete all as specified and as directed. Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish.

All as per srl item No 67 above but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 1.5 Sq mm earth wire and connected to earth dolly complete all as specified and as directed.

All as per srl item No 67 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 Sq mm earth wire and connected to earth dolly complete all as specified and as directed.

All as per Srl item No 67 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 Sq mm earth wire standard and connected to earth dolly complete all as specified and as directed.

All as per srl item No 67 but for 3 pin 5 Amps socket outlet on the same board including copper PVC insulated PVC unsheathed 1.5 Sq mm earth wire and connected to earth dolly complete all as specified and as directed.

All as per srl item No 67 but for 3 pin 5 Amps socket outlet independent including copper PVC insulated PVC unsheathed 1.5 Sq mm earth wire and connected to earth dolly complete all as specified and as directed.

All as per Srl item No 67 but for 3 Pin 15 Amps socket outlet independent with cable 4.0 Sq mm including copper PVC insulated PVC unsheathed 2.5 Sq mm earth wire standard and connected to earth dolly complete all as specified and as directed.

S&F modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and as directed.

S&F modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and as directed.

S&F modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and as directed.

S&F modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and as directed.

Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Block complete all as specified and as directed.

S&F in replacement single pole and neutral enclosure surface mounted 240 voltswith 2 pin and earth plug and socket with one single pole MCB 20 Amps with indicator of complete all as specified and as directed.

Supply and fixing in replacement LED lights fitting 1x 20W, 230V,AC decorative box type warm white colour with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F in replacement 36W (2 x 2) LED Ceiling/recess light panel for recess mounting warm white colour which provides soft-light and glare free symmetrical illumination complete all as specified and as directed.

Supply and fixing in replacement LED luminaire 15 watt, 220 V AC recess mounted downlighter type with high efficiency PC diffuser soft light and symmentrical illumination complete with driver, holders & LED lamp warm white suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in replacement Sheet metal enclosure double door type for MCCB TPN DB upto 125 Amps, 4 way vertical type 415 volts with 400 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed.

S & F replacement MCCB Three Pole & Neutral capacity of 125 amps 415 volts rupturing capacity 16 KA complete all as specified and as directed.

S&F in replacement Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 08 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed.

S & F in replacement MCB single pole 240 volt any rating from 10 to 40 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and as directed.

S & F in replacement MCB single pole and neutral 240 volt any rating from 63 Amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead all as specified. Including taking down old sub main wire complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead complete all as specified and as directed.

Supply and fixing LED building security light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete all as specified and as directed.

Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers along with all electrical wire connection complete all as specified and as directed.

Supply and fixing ceiling fan, AC single Phase. 230V of size 1200mm sweep with, blades, and frame along with all electrical wire connection complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 5 connected to main control board complete all as specified and as directed. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.Note: if earth resistance of earthing is not found (2 to 5 Ω) satisfactory if will be redone by the contractor on his risk and cost.

Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 25 Sqmm x 3.5 core size including taking down old cable complete all as specified and as directed. Note : Earth work and other connected work shall be measured & paid sperately.

Point wiring for one light point /fan point/ bell point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded flexible copper cable 1100V grade in and including not less than 2.00 mm thick and 20 mm dia Concealed PVC Conduit ( ISI marked ) with and all accessories 1.5 mm thick mild steel terminal boxes concealed on walls, painting the same inside and out side with one coat of black bitumen paint with 3mm thick hylam brand bakelite sheet cover for fixing of piano switches/sockets/ regulator etc along with PVC insulated and unsheathed FRLS 1.5sqmm multi stranded copper conductor cable (green color) as earth lead, & connected to common earth and earthdolly, making good the disturbed surface to match with the existing specification complete all as specified and as directed.

All as per Item No 95 above but for one light point control by two no two way switches with other Independent Board with 1.5 sqmm PVC insulated unsheathed FRLS copper conductor single core multi strand flexible cable modular type and 1.5 sqmm PVC insulated unsheathed FRLS copper conductor single core cable (green color) as earth lead or & as directed to match with the existing specification complete all as specified and as directed.

All as per description of Ser Item No 95 above but for one 3 pin 5 Amp socket outlet point controlled by one push button on same board, complete all as specified and as directed.

All as per description of Ser Item No 95 but for one 3 pin 5 Amp socket outlet point controlled by one push button on independent board, complete all as specified and as directed.

All as per description of Ser Item No 95 but for one 3 pin 15A socket outlet on independent Board with PVC insulated unsheathed FRLS cable 4 sqmm copper multistrand conductor, along with PVC insulated and unsheathed FRLS 2.5 Sqmm multistrand copper conductor earth wire connected to common earth and earth dolly complete all as specified and as directed.

S&F in repair Switch socket outlet 3 pin 5 amp' flush type (Modular Type) with outer strip complete all as specified and as directed.

S&F in repair Switch socket Combination 16A, 6 pin, 3 module (Modular Type) with outer strip complete all as specified and as directed.

S&F in repair Switch piano flush button single pole one way 5 amps 240 volt complete all as specified and as directed.

S&F two way switch 5 Amps,230 volts complete all as specified and as directed.

S&F in repair Socket outlet 2 in 1, 3 pin, 5A, 240 Volt complete all as specified and as directed.

S&F in repair Switch socket combination 5 Amps 2-in-1, 5 Pin flush type, 230 volts complete all as specified and as directed.

S&F in repair Switch socket combination 5 pin 15 amp, flush type complete all as specified and as directed.

S&F in repair Ceiling rose surface bakelite 3 terminals complete all as specified and as directed.

S&F in repair fan regulator electronic, stepped type hum free suitable control speed of fan from 0 to 100 % and connecting electrically complete all as specified and as directed.

S&F in repair Fan step regulator (Modular Type), 120W - 2 module, hum free suitable control speed of fan from 0 to 100 % and connecting electrically complete all as specified and as directed.

Taking down ceiling fan/Exhaust Fan including disconnection of existing connection, dismanting of blades and Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and rehanging the fan complete all as specified and as directed.

S&F in repair call bell ding-dong 230 volts including taking down old one complete all as specified and as directed.

S&F in replacement Moduler bell push 6A 1 module 230 volts, AC complete all as specified and as directed.

S&F TPN Distribution board vertically with provision for TPN DB with MCCB 125 Amp, 16 kA as Incommer in 4 way TPN DB double door IP- 43 protection Including All PCC & Cementing work for installation of TPN DB to wall complete all as specified and as directed.

S&F in replacement Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. (Note-MCBs will be measured separately)

S&F MCB FP 40 Amp , 415V, 10KA , 'C' Curve complete all as specified and as directed.

S&F MCB Single Pole and Neutral , 230 Volt, C-Series,Raiting 40 Amps complete all as specified and as directed.

S&F MCB Single Pole and Neutral , 230 Volt, C-Series,Raiting 32 Amps complete all as specified and as directed.

S&F in repairs MCB Single Pole,230 Volt, C-Series, Rating 6 to 32 Amps Make :Havells or equivalent make in Schneider / Legrand/ C&S (Note : MCBs Make to be fix in existing DBs which is already replaced with new one alongwith MCB SPN) complete all as specified and as directed.

S&F Sheet metal enclosure Single pole & neutral with 2 pin and earth plug and socket 20A 240 complete with one double pole MCB 25 Amp C curve complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 4 Sq mm as earth lead all as specified. Including taking down old sub main wire complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 4 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 2.5 Sq mm as earth lead all as specified. Including taking down old sub main wire complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 2.5 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 1.5 Sqmm as earth lead all as specified. Including taking down old sub main wire complete all as specified and as directed.

S&F in repalcement of LED street Light fitting 30 Watt, New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 with acrylic, with Heat resistant toughened Glass, Corrosion resistant, complete making all connection with MCB SPN alongwith MCB Box enclosure, complete all as specified and as directed. Make- Cat Part No- ENDURAPEARLSL30WLED757SASYTOPCMP (ENDURA PEARL 30W MP)

S&F Street light Bracket complete made of GI pipe of suitable size of 25 mm dia, medium grade 1.2 m long bent to shape as per site requirement along with MS flat iron clamps with nuts, bolts, washers including grouting the same with wall ,including taking out old bracket complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.30 mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below normal ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead 4 mm dia by means of bolts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and indicated and testing on completion including excavation earth work drilling holes for electrode PCC pit & cover, funnel, water pipe lugs GI pipe medium grade protection pipe for earth lead up to DBs complete all as specified and as directed.

khajuria builders

s l sharma and sons

SINGH CONST CO

RAMAN CONSTRUCTION CO

VIRINDER SINGH