SPECIAL REPAIR/REPLACEMENT OF 37 NOs GEYSER AGAINST BER BD AT AEC TRG COLLEGE AND CENTRE AND PROVISION OF TOILET AT MULTIPURPOSE HALL AT AEC RECORDS PACHMARHI

Amount

Dismantling floor, walls, roof tiles including bedding but not backing and rubbish off permises complete all as specified and directed.

Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 Sqm each with shutters ( with out taking off shutters from the frames) incl making good the disturbed portion complete all as specified and directed.

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in hard/dense soil complete all as specified and directed.

Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in hard/dense soil complete all as specified and directed.

Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed.

Material & labour brick work with fly ash bricks in CM 1;6 brick straight or curved on plain exeeding 6m mean radius complete all as specified and directed.

M&L 1:2:4 Type B1 20 mm aggregate Beams, cantilevers, bressummers, lintels over 1.5m span

M&L Form work to sides and soffits of beams lintels etc finished rough complete all as specified and directed.

Supply & fix mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply & fix mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Material & labour for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material & labour for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces,in CM(1:4) surface finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II).

Supply & fix butt hinges, 100 mm long of stainless steel, complete all as specified & directed.

Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified & directed.

S&F aluminium tower bolts 150mm long, of extruded section complete all as specified & directed.

S&F aluminium powder coted ventilator louvers type frame top and bottom of size 31x42x1.60mm(sec no-20558) rectaular tube of size 40x20x2 mm (sec no-14019 and middle verticalof size 42x46.20x1.60mm sec(20560) and clip for fixing wiremesh and glass of size 19x17.30x0.90mm (sec no-19360)thick including and fixing stainless steel wire cloth 0.36mm niminal dia of wire and 1.40mm average width of aperature and fixed with stainless steel wire staples and supply and fixing 5mm thick louvers with blades of 100 mm heavy duty with neccessary rubber beading ,gasket etcincluding necessary plaster, painting ,cill and making good to disturbed portion all as specified and directed by Engr-in-Charge

M&L for suspended false ceilling comprising of 6mm thick non asbestos fibre cement bulding boards fixed or laid/inserted to GI frame work with screws over Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate)

M&L Non Skid ceramic tiles( white/light shade), 7-8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, (400 x 400 x 10mm) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15mm thick screed bed in CM 1:6 complete all as specified and directed

Material & labour Glazed ceramic tiles ( white/light shade) in vertical surfaces 350x250mmx7mm /450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick rendering in CM 1:6.complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in path /plinth protection , finish even & smooth without using extra cement complete all as specified and directed.

M&L for loose filling with aggregate of gauge 80 to 150mm of broken bricks complete all as specified & directed.

Supply, fix 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & dir.

Supply, fix 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & dir.

Supply & fix 15mm thick bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed.

Supply & fix angular valve, 15 mm dia, cast copper alloy, chromium plated, fancy type, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.

Supply & fix in PVC low level flushing cistern of 9-10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed.

Supply & fix in PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply & fix rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings complete all as specified & directed.

S&F Gun -metal,globe or gate valves 20mm bore,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply & fix in vitreous china wash hand basin, white, flat back of size 550x400mm (excluding taps, waste chain and plug and porcelain stopper) but including brackets suitable for 15mm dia pipe complete all as specified & directed.

S&F Vitreous China bowl urinal flat back, size of 465x355x265 mm White ( minimum), with grating and union for discharge pipe ( excluding flushing cistern, flush pipe , and waste pipe) , fixed in repairs including connections to flushing pipe and outgoing complete all as specified and directed.

S&F as in repair vitreous china wash down water closet pan (pedestal pattern), white including fixing bolt and plastisc water closet seat cover white closed pattern with flat bottom cover with MS chromium plated hinging devices to matching colour including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified & directed.

S&F in repair PVC(SWR) bends 110mm bore provided with access door, any radius complete all as specified & directed.

S&F in repair PVC(SWR) bends any radius of 75mm bore provided with access door, any radius complete all as specified & directed.

S&F PVC (SWR) vent cowl of 75mm bore, any radius complete all as specified & directed.

S&F PVC (SWR) vent cowl of 110mm bore, any radius complete all as specified & directed.

S&F PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F PVC (SWR), junction single, (Single T) equal or unequal 110 mm bore complete all as specified and directed.

Supply & fix Cast iron floor trap, with grating including jointing to waste pipe(75 mm dia) fixed incement concrete type B-1(1:2:4) complete all as specified & directed.

S&F 40 mm dia high density polyethylene pipes (HDPE) of pressurerating 6 kgf/cm2 fi xed complete to walls, ceilings or in floorscomplete all as specfied and directed.

Supply & fix pillar taps cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed.

S&F Tubular towel rail 20mm dia alu. anodised, D type, 60cm long between flanges complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed.

M & L Preparation of newly plaster surface of wall and applying two coats of cement base paint over one coat of cement primer complete all as specified.

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of oil bound distemper on Wall or concrete over a coat of primer on prepared surfaces including rubbing with sand paper complete all as specified and directed

Supply only integral water proofing compound of approved brand/make.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base 100mm thick complete all as specified and directed

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified

M&L for 60mm thick coloured machine pressed precast concrete interlocking paver block glossy finished any size and shape conforming to IS15658-2006, M-40 Grade with grey cement and pigment over stone dust filling complete all as directed (Cost of stone dust will be measured and paid separately).

M&L Concrete bed to drain pipes 150mm, including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC(1:4:8) Type D-2. complete all as specified and directed.

M&L Slat-glazed stoneware drain pipes 150 mm dia laid in trenches and jointed complete all as specified and directed.

Material & labour for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces,in CM(1:4) surface finished even and smooth without using extra cement complete all as specified and directed.

M&L PCC(1:3:6) type C1 as in benching to man hole complete all as specified and directed.

M&L for precast reinforced cement concrete (nominal mix) type B1 (1:2:4) using (20mm graded stone aggregate) in cover slab for manholes and setting in cement mortar 1:4 complete all as specified and directed.

M&L cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in slabs supported on wall, beams and column in floors, roofs landing, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm complete all as specified and directed.

Supply & fix mild steel TMT bars 6 to 8 mmmm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia in half brick wall complete all as specified and directed.

S&F water heater 25 litre capacity BEE star rating 5, vertical pattern in approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature settings between 250C to 750C, outer tank made of metallic engineering, inner tank made of extra thick superior cold rolled steel provided with high density PUF insulation complete.

S&F water heater 50 litre capacity BEE star rating 5, vertical pattern in approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature settings between 250C to 750C, outer tank made of metallic engineering, inner tank made of extra thick superior cold rolled steel provided with high density PUF insulation complete.

S&F Sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 240V 20 Amp for AC or geyser all as directed.

Point wiring with 1100 volts grade PVC insulated FR -LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete for One light point controlled by one switch.

As per item No 70 but for exhaust fan point controlled by one switch.

As per item No 70 but for one socket outlet 6 amp controlled by one switch on the same board with other switches.

S&F switch piano flush button single pole one way 6 amp complete.

S&F angle holder, insulated polycabonate body with back plate complete.

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete.

M&L for submain wiring along with earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase-Red/Yellow/Blue, Neutral-Black,Earth-Green) drawing into and including concealed rigid non metallic PVC conduit medium grade ISI marked Ivory colour 20 mm dia alongwith accessories of nominal sizes 2X4 Sqmm + 1X4 sqmm earth condinuity conductor complete.,

S&F LED batten (1.2 m) made of Aluminium housing with a PC glossy difusser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 19 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete.

S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap of make complete all as specified and directed by Engr- in-Charge

fan 150mm sweep exceptionally super silent operation automatic front opening to prevent entry of foreign objects and easy maintenance and cleaning complete with fiixing arrangement.

S&F MCB distribution board SPN, 240 volts, 4 ways,double door, powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Single pole 6 to 32 amp.

As per item No 81 but for Single pole and neutral (SPN) 40 amp.

M/S RAKESH TRADERS (BID ID -3478349)

GHASI RAM SAHU (BID ID -3473589)