REPAIR/MAINTENANCE TO JOINERY, PLUMBING, KITCHEN AND TOILET FITTINGS AT DID LINES IN THE AREA OF AGE BR I UNDER GE EAST DELHI CANTT-10

Amount

Demolition in cement concrete of cement concrete in ground floor and paving not exc. 15 cm thick below or above ground level, complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, complete all as specified and as directed.

Taking down cement plaster from brick or concrete surfaces including raking out joints, hacking for key and scrubbing down with water, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5Sqm each and removing to store, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5Sqm but not exceeding 4Sqm each and removing to store, complete all as specified and as directed.

Taking down shutters not exceeding 1.0 Sqm each and removing from site, complete all as specified and as directed.

Taking down shutters of any description exceeding 1Sqm and not exceeding 2Sqm each, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) & removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling timber work in scantlings exceeding 40Sqcm and over in section framed work, complete all as specified and as directed.

Dismantling boarding of any description, fixed in cup boards, showcases, utensil racks and similar type of items, including cover fillets if any, complete all as specified and as directed.

Dismantling Asbestos cement/steel (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for bore of pipe 15mm, complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for bore of pipe 20mm, complete all as specified and as directed.

Dismantling existing water tanks of capacity exc 250 & not exceeding 500 ltrs lowering from its position and removal to store, complete all as specified and as directed.

Dismantling existing water tanks of capacity exc 500 & not exceeding 1000 ltrs lowering from its position and removal to store, complete all as specified and as directed.

Hacking out old broken glass, any thickness size, quality or description from any type of frames including punching or drilling out old glazing pins / spring clips and providing and fixing new ones, complete all as specified and as directed. (Note : Hacking to be done at any building height upto 8 stories high)

Cutting holes into or through brick walls built in cement mortar for inserting hold fast/passing of pipes, exceeding half brick but not exceeding one brick thickness and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1, complete all as specified and as directed.

Marble of any shade other than white and black 18- 20 mm thick ( table rubbed and polished ) in steps, Jambs, pillars, Cooking platform, floor and like in cement mortar 1:4 including pointing in white cement mortar 1:2 using marble dust with admixture of pigment to match with marble laid over 20mm thik screed bed in cement mortar 1:6, bedded, jointed and pointed with grey cement slurry including cutting and polishing, complete all as specified and as directed.

18/19mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws / Piano hinges to timber frame work as in shutters, shelves, sides, top, bottom of kitchen cabinets/Almirahs/Cupboards, complete all as specified and as directed.

2nd class hard wood plain fillets square, rectangular or triangular in section clean sawn area of size exceeding 6Sqcm but not exceeding 13Sqcm clean sawn, secured with nails or beads, fixed in repairs, complete all as specified and as directed.

Ist class hard wood external teak wood leaping, 6mm thick to 18-19mm thick prelaminated particle board or veneered particle board, fixed with nails or brads, complete all as specified and as directed.

2nd class Hard wood plain, solid, straight chowkats and frames wrought, framed, rebated on the solid, rounded or chamfered, put togather with glue and pinned at joints, complete all as specified and as directed.

Pressed steel frames size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including filling hollow portion of frames with PCC 1:3:6 Type C-0 using 12.5mm graded crushed stone aggregate etc., complete all as specified and as directed.

Pressed steel frames size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including filling hollow portion of frame with PCC 1:3:6 Type C-0 using 12.5mm graded crushed stone aggregate etc., complete all as specified and as directed.

Factory made Flush door shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.

Factory made, Plain framed panelled shutters of 2nd class hard wood 35mm thick (any number of panels) with lock rails and panels of 9mm thick BWP commercial ply or 12mm veneered parcticle board with commercial veneering on both faces. The size of rails and stile as per IS:1003, complete all as specified and as directed.

Glazed and Skelton shutters using 2nd class hard wood, 30mm thick open rebated and prepared to receive glass or gauge etc., edges of framing plain and chamfered or fitted with cut or mitered beads for securing glass or gauze, size of member of shutter as specified in SSR Part-I section 8, clause 8.23(a) and divided in square complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail, lock on either side and gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointing together with solvent cement, supplying & fixing of frame at site, complete all as specified and as directed.

75mm size butt hinges (medium weight) colled rolled mild steel, complete all as specified and as directed.

100mm size butt hinges (medium weight) colled rolled mild steel, complete all as specified and as directed.

Extruded aluminium alloy handles cast type anodised of size 100mm size, complete all as specified and as directed.

Extruded aluminium alloy handles cast type anodised of size 125mm size, complete all as specified and as directed.

Extruded aluminium alloy handles cast type anodised of size 150mm size, complete all as specified and as directed.

Fancy type brass bright polished handles oval type of size 75mm size, complete all as specified and as directed.

Fancy type brass bright polished handles oval type of size 150mm size, complete all as specified and as directed.

Aluminium anodized 150mm size barrel tower bolt of extruded section and fixed, complete all as specified and as directed.

200 mm size aluminium alloy anodised sliding door bolt with haps, staple ( bolt type ) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, fixed in repair complete all as specified and as directed.

250 mm size aluminium alloy anodised sliding door bolt with haps, staple ( bolt type ) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, fixed in repair complete all as specified and as directed.

Continuous piano type hinges, brass body with width of flaps 30mm, complete all as specified and as directed.

Hasp and staple safety type aluminium anodized with mild steel hinges pin including bolt to hinge plate and fixed with wcrews 150mm size, complete all as specified and as directed.

50mm size cup board locks of brass 2 lever including keys set, complete all as specified and as directed.

Magnetic catches with steel body ‘H’ type, fixed to shutter, complete all as specified and as directed.

Floor door stopper of alluminum alloy body and tongue, anodised with hard drawn steel spring of size 140 mm, fixed in repairs, complete all as specified and as directed.

Aluminium (die cast) body door closer hydraulically regulated designation No 3 universal type suitable for door shutter of weight between 61 to 80 kg, fixed in repairs, complete all as specified and as directed.

Rubber door seal 32mm wide with Aluminium strip of size 19mm wide fixed with steel machine screws with washer, complete all as specified and as directed.

25mm dia aluminium anodised powder coated curtain rod of superior quality with 2mm wall thickness of pipe, fixed in repairs, complete all as specified and as directed.

End bulb and stainless steel brackets of required size in cluding fixing bracket for 25 mm dia drapory rod of anodised aluminium, complete all as specified and as directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, and fixed with tinned tacks or galvanised mild steel staples, complete all as specified and as directed.

Box type Steel windows with double shutters including hinges, steel handle, tower bolt and steel peg stay complete without glazing bars dovetailed or welded including provision for AC/desert cooler opening and cover including a coat of red oxide after preparation of surface before fixing all as shown in drg No. TD-A sheet 1/3 to 3/3, complete all as specified and as directed.

Mild steel work as in Hollow section, angle Iron, flat Iron for fixed indepently connecting purlin, rafters, MS plate as reqd forming holes bolted and welded attchment and curved shaped by welding (thickness of metal n.exxc.6mm) making jointless by filling including cutting etc, complete all as specified and as directed.

Mild steel framed work as in grills, gratings etc., with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladder, framed balusters, railing, frame work for water tanks and similar work, complete conforming to Fe 290 Gde-E-165 including shop coat of red oxide including preparation of surface before fixing, complete all as specified and as directed.

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

25 mm thick PCC 1:2:4 type B-1, using 20mm graded crushed stone agregate, as in sub base to floor finishes, complete all as specified and as directed.

75 mm thick plain cement concrete 1:3:6 type C-2, using 40mm graded crushed stone aggregate as in Plinth protection finished even and fair, complete all as specified and as directed.

Pre-polished coloured chequered cement concrete tiles, factory made, Premium quality 300mm x 300mm x 25mm thick, set, jointed in neat cement slurry and pointed flush with grey cement and no pigments to match colour of blocks in floors over 15 mm thick screed bed or bedding layer in cementy mortar 1:4, complete all as specified and as directed.

Machine cut kota stone slab 18-20mm thick as in floors laid, bedded and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish complete including screed bed or bedding layer of mortar 15mm thick in cement mortar 1: 4 for laying floor finishes, complete all as specified and as directed.

Vitrified coloured ceramic tiles light shade 10mm thick (square/rectangular) polished, area of tiles not exceeding 0.36Sqm each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 including dismantling of old tiles with backing, complete all as specified and as directed.

Anti skid ceramic coloured floor tiles, 7-8mm thick, size of ech tile exceeding 0.11Sqm but not exceeding 0.18Sqm as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in cement mortar 1:4, complete all as specified and as directed.

1st quality/Premium quality glazed ceramic digital coloured highlighter tiles of size 300x 600x 7 mm thick as in vertical surfaces such as skirtings, dados etc., set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles, laid over 10 mm thick backing layer in cement mortar 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) & removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and as directed.

Preparing newly plastered surfaces of walls and applying a layer of water proof cement based putty @ 1Kg/Sqm (undiluted) including sanding the surface with mechanical sanding machine/manually and finishing the prepared surface with two coats of (ready mixed) acrylic emulsion having VOC content less than 50gms/Litre of approved manufacturer and shade as approved by Engr-in-Charge, complete all as specified and as directed.

Preparing newly plastered surfaces of wall and applying two coats of cement based paint over a coat of cement wash, complete all as specified and as directed.

Preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint on surfaces of any description exceeding 10 cm width or girth over a coat of red oxide, complete all as specified and as directed.

Sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm.in each pane, complete all as specified and as directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar1:3 in brick or stone wall , cutting not exc 10cm girth, complete all as specified and as directed.

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, complete all as specified and as directed.

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, complete all as specified and as directed.

Rotational moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore, complete all as specified and as directed.

Rotational moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore, complete all as specified and as directed.

20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed minimum weight -210gms, fixed in repairs, complete all as specified and as directed.

20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe, fixed in repairs, complete all as specified and as directed.

Fancy type concealed Stop valves cast copper alloy chromium plated screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipes or for unions, 15mm dia of pipe, fixed in repairs, complete all as specified and as directed.

Fancy type Stop valves cast copper alloy chromium plated screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipes or for unions, 15mm dia of pipe, fixed in repairs, complete all as specified and as directed.

Centre hole Basin mixer 15mm dia chromium plated brass with costed swinging spout including plugging and securing to walls, fixed in repairs, complete all as specified and as directed.

Sink mixer 15mm dia chromium plated brass with swinging spout (wall mounted type) including connecting legs and wall flanges, fixed in repairs, complete all as specified and as directed.

Fancy type chromium plated long body type Bib tap cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore, fixed in repairs, complete all as specified and as directed.

Corner Glass Shelf of size 225mm x 225mm including screws and bracket fixed in position, fixed in repairs, complete all as specified and as directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long, fixed in repair, complete all as specified and as directed.

PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved, fixed in repairs, complete all as specified and as directed.

Vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' or 'S' trap, fixed in repairs, complete all as specified and as directed.

Plastic water closet seat, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device, fixed in repairs, complete all as specified and as directed.

Vitreous china squalting pan of Orrisa pattern long pan size 580mm x 440mm white with 'P' or 'S' trap front or back inlet and foot rest any pattern including connection to trap and to flushing pipe etc complete including lime concrete bedding and making good to floor, fixed in repairs, complete all as specified and as directed.

Wash basin, Vitreous China white flat back of size 550mmx400mm including cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste, chain and plugs and procelain stopper but including brackets, fixed in repairs, complete all as specified and as directed.

Sinks made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, fixed in repairs, complete all as specified and as directed.

Stainless steel peg set of 06 hooks fixed to wall with plastic gutties and stainless steel screws, fixed in repairs, complete all as specified and as directed.

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

Vipul Construction

SAGAR ENTERPRISES

sunil traders

Baljeet Builders & Interior Decorators